Instrukcja obsługi Tascam IF-SM/DM


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tascam IF-SM/DM (19 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/19
This appliance has a serial number. Please
record the model number and serial number
and retain them for your records.
Model number
Serial number
»
IF-SM/DM
Surround Monitor Card
OWNER’S MANUAL
D00885000A
2 TASCAM IF-SM/DM Owner’s Manual
Contents
1 – Introduction
Installation ............................................ 3
Connections ........................................... 4
Monitor alignment ............................... 4
2 – Using the card
OPERATION option ............................... 5
Muting channels ............................ 5
Soloing channels ............................ 6
Downmix on/off ............................ 6
Bass management ......................... 6
Alternative speakers ..................... 6
Oscillator routing ........................... 6
To 2.1 ............................................. 6
SPL reference and level ................. 6
Notes on other hardware controls ...6
ROUTING option ................................... 7
Monitoring keys ............................ 7
Output routing .............................. 7
DOWNMIX option ................................. 8
6.1 format ....................................... 9
5.1 format ..................................... 10
LRCS format ................................. 11
Stereo format ............................... 12
BASS MANAGEMENT option .............. 13
Type 1 bass management ........... 13
Type 2 bass management ........... 13
MONITOR ALIGNMENT option ........... 14
Trimming the levels ..................... 14
Generating the pink noise .......... 15
Setting the surround speaker level ...15
Adjusting the LFE GAIN ............... 15
Channel delay .............................. 15
Setting the overall surround level ... 16
3 – Reference
Block diagram ...................................... 17
Level diagram ...................................... 18
Audio performance ............................. 18
Table of figures
Figure 1.1: Fitting the card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Table 1.2: Pin assignments of the IF-SM/DM analog outputs . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Figure 2.1: The main surround monitor screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Figure 2.2: The OPERATION option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Figure 2.3: SHIFTed number keys used for channel control . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Figure 2.4: ROUTING option screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Figure 2.5: Example downmix screen showing attenuation points . . . . . . . . . . . . . . . . . . . . . 8
Table 2.6: 6.1 to 5.1 downmix pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table 2.7: 6.1 to 2.1 downmix pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table 2.8: 6.1 to stereo downmix pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table 2.9: 6.1 to mono downmix pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table 2.10: 5.1 to phantom rear LRCS downmix pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Table 2.11: 5.1 to hard rear LRCS downmix pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Table 2.12: 5.1 to 2.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Table 2.13: 5.1 to stereo downmix pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Table 2.14: 5.1 to mono downmix pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Table 2.15: LRCS to stereo downmix pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Table 2.16: LRCS to mono downmix pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Table 2.17: LRCS to LRCS with phantom rear downmix pattern . . . . . . . . . . . . . . . . . . . . . . 12
Figure 2.18: Stereo to mono downmix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Figure 2.19: Example downmix screen showing attenuation points . . . . . . . . . . . . . . . . . . . 13
Figure 2.20: Type 1 and Type 2 bass management for 5.1 and 6.1 settings . . . . . . . . . . . . . 13
Figure 2.21: Example downmix screen showing attenuation points . . . . . . . . . . . . . . . . . . . 14
Figure 3.1: Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 3.2: Level diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
TASCAM IF-SM/DM Owner’s Manual 3
1 – Introduction
The IF-SM/DM card allows the connection of one or two surround monitoring systems. It pro-
vides flexible setup capabilities, routing, downmix capabilities, bass management, and monitor
setup, etc. from within the IF-SM/DM’s interface.
Installation
You should not install or remove cards your-
self, but should refer installation to a qualified
TASCAM distributor. Otherwise, the war-
ranty will be voided.
1 Turn off the main unit and disconnect
it from the power supply. Disconnect
all other equipment connected to it.
WARNING
The above step is most important. If you do not
do this, there is a risk that you may cause damage
to the main unit as well as to other equipment.
2 Use a screwdriver to remove the blank-
ing panel from the slot into which you
will fit the interface card. Keep the
retaining screws in a safe place.
If you are installing more than one
card, we suggest that you start from the
top slot (slot 1) and work downwards.
Take care, if you are removing a previ-
ously-fitted interface card, that you
are removing the retaining screws, and
not the smaller screws which fix the
card to the rear plate. Also, if you are
removing a previously-fitted card, use
the binding posts on the rear plate to
help remove the card.
3 Remove the interface card from the
anti-static protective bag. Hold the
card by the edges, and insert it, com-
ponent side upwards, into the slot.
Insert the card between the guide rails
and slide it all the way into the slot, as
shown. You may have to pushrmly to
plug the card into the internal connector.
4 Locate the card into the connector
inside the main unit. Push the card
firmly, without forcing, so that the con-
nector grips the end of the card.
Figure 1.1: Fitting the card


Specyfikacje produktu

Marka: Tascam
Kategoria: Niesklasyfikowane
Model: IF-SM/DM

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tascam IF-SM/DM, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Tascam

Tascam

Tascam US-1X2 Instrukcja

4 Października 2024
Tascam

Tascam DR-10L Pro Instrukcja

24 Września 2024
Tascam

Tascam Porta-02MKII Instrukcja

19 Września 2024
Tascam

Tascam TC-8 Instrukcja

14 Września 2024
Tascam

Tascam US-800 Instrukcja

14 Września 2024
Tascam

Tascam 424MKIII Instrukcja

9 Września 2024
Tascam

Tascam DP-008 Instrukcja

6 Września 2024
Tascam

Tascam VL-A4 Instrukcja

5 Września 2024
Tascam

Tascam US-1200 Instrukcja

2 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane