Instrukcja obsługi Tascam IF-E100


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tascam IF-E100 (14 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/14
D01337420A
CD-400U
Network Settings
取 扱 説 明 書
2 TASCAM CD-400U Network Settings
TASCAM CD-400U Network Settings is an application that can be
used from a Windows/Mac web browser to make network set-
tings and check the status of a TASCAM CD-400U that has an IF-
E100 Internet board installed.
Before using this application, read the Software Use Li-
cense Agreement and agree to its terms.
Conventions used in this manual
In this manual, we use the following conventions:
0When we show characters that appear on the computer dis-
play, the typeface looks like this: .OK
0As necessary, additional information is provided under TIP,
NOTE and CAUTION headings.
TIP
These are tips about how to use the software.
NOTE
These provide additional explanations and describe special
cases.
ATTENTION
Failure to follow these instructions could result in damage to
equipment or lost data, for example.
VCAUTION
Failure to follow these instructions could result in injury.
Trademarks and copyrights
0TASCAM is a registered trademark of TEAC Corporation.
0Apple, Mac, Mac OS and macOS are trademarks of Apple Inc.
in the United States and other countries
0Microsoft, Windows, Windows XP and Windows Vista are ei-
ther registered trademarks or trademarks of Microsoft Corpo-
ration in the United States, Japan and other countries.
0Other company names, product names and logos in this doc-
ument are the trademarks or registered trademarks of their
respective owners.
Contents
Conventions used in this manual 2 ............................................
Trademarks and copyrights 2 .....................................................
Operating environment 3 ...........................................................
Windows 3 .....................................................................................................
Mac 3 ...............................................................................................................
CD-400U unit and application versions 3 ..........................................
Installing the CD-400U Network Settings application 3 ..........
Windows 3 .....................................................................................................
Mac 4 ...............................................................................................................
Working with Gatekeeper 5 ....................................................................
Connecting to the IF-E100 6 .......................................................
Disabling network interfaces that will not be used 7 ....................
Screen overviews 8 ......................................................................
Settings page 8 ............................................................................................
Initializing page 9 .......................................................................................
Changing network settings 9 .....................................................
Acquiring the IP address automatically 9 ..........................................
Sending the IP address manually 10 ....................................................
Changing the Telnet password. 11 ........................................................
Initializing network settings.................................................. 12
Quitting the application 13 ........................................................
TASCAM CD-400U Network Settings 3
Operating environment
Windows
Supported operating systems
Windows 10 (32bit, 64bit)
Windows 8.1 (32bit, 64bit)
Windows 7 SP1 (32bit, 64bit) or newer
NOTE
It cannot be used with Windows 8, Windows XP or Windows
Vista.
Computer hardware requirements
Computer running Windows
CPU :
Intel Core i series or newer recommended
Memory
2 GB or more (at least 4 GB recommended)
Open disc space
At least 150 MB
Screen resolution/number of colors
1280×1024 (SXGA) or higher
True Color (32-bit) recommended
Mac
Supported operating systems
macOS High Sierra (10.13)
macOS Sierra (10.12)
OS X El Capitan (10.11)
Supported models
Macs with Intel Core i/Core M series processors
Memory
2 GB or more (at least 4 GB recommended)
Open disc space
At least 150 MB
Screen resolution
1280×1024 (SXGA) or higher
CD-400U unit and application versions
CD-400U: Ver 1.10 or later*
* We recommend that you always use the latest firmware for the
CD-400U unit. For information about the latest firmware, visit
the TEAC Global Site (http://teac-global.com/).
Installing the CD-400U Network Set-
tings application
Windows
1. Connect the computer you are using to the Internet.
2. Download the CD-400U Network Settings application from
the TEAC Global Site (http://teac-global.com).
oBe aware that transmission charges related to using the In-
ternet connection are your responsibility.
3. Decompress the file after downloading, and double-click the
TASCAM_CD-400U_NetworkSettings_ver1.0.0_win.exe file
to launch the installer (“1.00” is the version).
When the installer language selection screen opens, select
the language you want and click the OK” button.
4. The software license agreement screen opens.
Select I accept the agreement to agree to the license, and
click to continue.“Next >”
5. The shortcut creation screen opens.
Put a check ( ) in the box next to Create a desktop icon to
create a shortcut on the desktop, and click Next > to con-
tinue.
6. The installation confirmation screen opens.
Confirm the installation details, and click the button.“Install”


Specyfikacje produktu

Marka: Tascam
Kategoria: Niesklasyfikowane
Model: IF-E100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tascam IF-E100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Tascam

Tascam

Tascam US-1X2 Instrukcja

4 Października 2024
Tascam

Tascam DR-10L Pro Instrukcja

24 Września 2024
Tascam

Tascam Porta-02MKII Instrukcja

19 Września 2024
Tascam

Tascam TC-8 Instrukcja

14 Września 2024
Tascam

Tascam US-800 Instrukcja

14 Września 2024
Tascam

Tascam 424MKIII Instrukcja

9 Września 2024
Tascam

Tascam DP-008 Instrukcja

6 Września 2024
Tascam

Tascam VL-A4 Instrukcja

5 Września 2024
Tascam

Tascam US-1200 Instrukcja

2 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane