Instrukcja obsługi SVS SoundPath Tri-Band

SVS Karta sieciowa/adapter SoundPath Tri-Band

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SVS SoundPath Tri-Band (8 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

TRI-BAND WIRELESS AUDIO

ADAPTER

Owner’s Manual

Thank you for choosing SVS!

Congratulations on bringing home the , the SVS SoundPath Tri-Band Wireless Audio Adapter

best solution available for eliminating subwoofer cable clutter without sacriﬁcing performance.

Because it passes a full-range Left/Right stereo signal, you can also wirelessly connect stereo

speakers, powered surround sound speakers, ampliﬁers, and any stereo audio component.

The SoundPath Tri-Band Wireless Audio Adapter operates in the 2.4 GHz, 5.2 GHz and 5.8 GHz

bands and is highly resistant to all forms of wireless interference from common household

devices. Seamless switching between channels ensures your subwoofer, speakers or other audio

components will remain connected in even the most congested wireless environments so you can

always enjoy uninterrupted listening experiences.

Installation requires only a few simple steps. If you have questions about subwoofer or speaker

placement, system optimization or installing the SVS SoundPath Tri-Band Wireless Audio Adapter,

please contact the SVS Sound Experts tech support 7-days-a-week.

custservice@svsound.com | 877.626.5623 | www.svsound.com

Speciﬁcations & Features

Adapter Includes

» Tri-Band Wireless Audio Transmitter

» Tri-Band Wireless Audio Receiver

» Mono RCA to RCA interconnect cable (x2)

» USB A to micro B power cable for power adaptor (x2)

» 5V DC power adapter with USB A Connector (x2)

» Velcro for securing devices (x2)

What You Will Need

» Output device (subwoofer, powered speakers or ampliﬁer)

» Source device (AV receiver, surround processor, or 2-channel pre-amp with a subwoofer pre-out

or L/R line level pre-out)

Speciﬁcations

Operating Voltage

RF Frequency Band

Sample Rate

Working Distance

Transmitter analog input level

Receiver analog output level

Frequency Response

Latency

THD+N (dB)

SNR (dB)

Receiver

Minimum power requirement:

4.75V @0.3ARF

Tri-Band (auto switching)

2.4/5.2/5.8 GHz

48kHz

Up to 130 feet; line of sight

N/A

Maximum 1Vrms

6Hz – 20 kHz +/- 0.5 dB

< 19 milliseconds

-70 dB (10Hz – 20kHz)

+ 105 dB 10Hz – 20kHz

Transmitter

Minimum power requirement:

5V @0.5A

Tri-Band (auto switching)

2.4/5.2/5.8 GHz

48kHz

Up to 130 feet; line of sight

Maximum 2Vrms

N/A

6Hz – 20 kHz +/- 0.5 dB

< 19 milliseconds

-70 dB (10Hz – 20kHz)

+ 105 dB 10Hz – 20kHz

General Placement and Set-up Tips

» Place the subwoofer, powered speaker or ampliﬁer at its intended location.

» Try to maintain line-of-sight (no walls or solid barriers) between the transmitter

and receiver for best results.

» Receiver should be within 130 feet of transmitter for best results.

» Avoid placing the transmitter next to devices that could create signal interference, such as mobile

phones, baby monitors, RF wireless phones and Wi-Fi routers.

Connecting the Wireless Transmitter to an AV processor

1. Connect the mono RCA cable to the subwoofer out or LFE channel of the AVR or pre-amp

processor to the R/LFE input on the wireless transmitter.

2. Connect the USB A to Micro B cable to the wireless transmitter and the included 5 VDC power

supply. You can also use an available USB charging port with an output of at least 5V @ 0.5A

3. If using the 5 VDC power supply, connect to nearby power outlet.

Connecting the Wireless Transmitter to a 2-channel stereo pre-amp

1. Connect a stereo RCA cable to the L and R line level pre-outs of the 2-channel stereo

pre-amp and to L and R input on the wireless transmitter. – CABLE NOT SUPPLIED

2. Connect the USB A to Micro B cable to the wireless transmitter and the included 5 VDC

power supply. You can also use an available USB charging port with an output of at

least 5V @0.5A

3. If using the 5 VDC power supply, connect to nearby power outlet.

CENTER

REAR FR

SUBWOOFER

(SUB1)

LINE LEVEL OUTPUTS

dio In

RECEIVER/PREAMP

Audio In

(Transmitter)

P Power air

LINE LEVEL OUTPUTS REAR FRONT

RECEIVER/PREAMP

Audio In

(Transmitter)

P Power air

Specyfikacje produktu

Marka:	SVS
Kategoria:	Karta sieciowa/adapter
Model:	SoundPath Tri-Band

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SVS SoundPath Tri-Band, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Karta sieciowa/adapter SVS

SVS SoundPath Tri-Band Instrukcja

19 Września 2024

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter

LevelOne FNC-0109TX Instrukcja

14 Października 2024

StarTech.com ST1000SPEX2T Instrukcja

9 Października 2024

StarTech.com ST1000SPEX2LT Instrukcja

9 Października 2024

StarTech.com AF221CE-POE-INJECTOR Instrukcja

9 Października 2024

StarTech.com USB3LINK Instrukcja

9 Października 2024

StarTech.com PCMACLINK2 Instrukcja

9 Października 2024

StarTech.com PEX1000SFP Instrukcja

9 Października 2024

StarTech.com ST2GPEX Instrukcja

9 Października 2024

StarTech.com USB56KEM2 Instrukcja

9 Października 2024

StarTech.com PUSBADAP Instrukcja

9 Października 2024