Instrukcja obsługi SVAN SVCA04CV

SVAN Podgrzewacz SVCA04CV

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SVAN SVCA04CV (4 stron) w kategorii Podgrzewacz. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
FAN HEATER
Model: SVCA04CV
INSTRUCTION MUANUAL
SVAN TRADING S.L.
C/Ciudad de Cartagena, 20. Paterna (46988). SPAIN.
info@svanelectro.com
96060034
Please read these instructions for use and have a good look at the illustration before
using the appliance.
This appliance is not intended for use by persons(including children)with reduced
physical,sensory or mental capabilities,or lack of experience and knowledge,unless they have
been given supervision or instruction concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not play with the appliance.
The heater must not be located immediately below a socket-outlet.
Do not use this heater in the immediate surroundings of a bath,a shower or a swimming pool!
GENERAL SAFETY
●DO NOT COVER, RESTRICT AIR INLET OR USE TO DRY CLOTHES
●THE SURFACE OF THIS FAN HEATER IS HOT. CLOSELY SUPERVISE ANY CHILDREN
AND PETS WHEN IN USE.
●DO NOT USE FAN HEATER NEAR FLAMMABLE OR HEAT SENSITIVE ITEMS.
●USE IN UPRIGHT POSITION ONLY AND DO NOT LEAVE UNATTENDED.
ELECTRICAL SAFETY
●FOR INDOOR USE ONLY.
●SWITCH OFF AND UNPLUG WHEN NOT IN USE.
●DO NOT PULL THE HEATER ALONG BY THE CORD OR USE IF DAMAGED.
●DO NOT USE HEATER IN HUMID OR WET ENVIRONMENTS.
●IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY AN ELECTRICAN
OR SIMILARLY QUALIFIED PERSON, TO AVOID HAZARD.
TO USE
1. Turn the heater to the “OFF” position before plugging in.
2. The operating temperature is selected by a combination of the power switch and
thermostat. The hottest setting will be when the heater is at the “High” setting and
thermostat is turned to “Maximum”.
3. To determine the correct working temperature for your conditions, turn the heater to “High”
and the thermostat to “Maximum”. The power light will be activated and the heater will start.
When a comfortable temperature has been reached turn the thermostat slowly
anticlockwise until the heater turns o. The temperature will now be kept constant.
4. If you want to lower the operating temperature select the “Low” heater setting and repeat
the above process.
5. For air circulation only (no heat) select “Fan only”.
6. The heater is tted with an automatic cut out in the event that it overheats. If this activates,
turn the heater to the o position and un plug. Allow the heater to cool and remove
anything restricting the airow before using the heater again. If the automatic cut out
operates repeatedly contact a qualied electrician for advice.
NOTES
●The power lamp will be on if the temperature is below the setting of the thermostat.
●For maximum benefit, close windows and doors.
●Do not cover the ventilation holes as this will cause overheating and will activate the cut
out.
CLEANING AND MAINTENANCE
To maximize the eciency of the heater clean regularly.
1. Switch power switches to “OFF” position, unplug and allow the heater to cool.
2. Wipe surfaces with a soft damp cloth. Do not use detergent or abrasives as this will
scratch the surface.
3. Ensure the intake grill is free from dust, as this will reduce the airow. Light accumulated
dust can be removed with soft cloth or vacuum cleaner.
4. Allow surface to fully dry before using the heater again.
MAXIMISE THE LIFE OF YOUR HEATER
●Avoid knocking or scratching the heater.
●Do not use in dusty environments.
●When not in use store in clean, cool and dry area.
Operation instructions
1. Turn the thermostat switch to the minimal value, at the same time turn the heat select
switch to the “O” position (see picture).
2. Plug in the appliance, and turn the thermostat switch to the maximum position. Then turn
the heat select switch to choose air or warm air and the temperature of warm air as below.
While working the indicator light will be on.
2.1 Turn the heat select switch to “ “ position, the heater blows cool air.
2.2 Turn the heat select switch to “I” position, the heater blows warm air, working at 1000W.
2.3 Turn the heat select switch to “II” position, the heater blows warm air, working at 2000W.
2.4 Turn the heat select switch to “O” position, the heater stops working, the indicator light will
be o.
3. Adjust the thermostat switch to suitable position for desired temperature setting.
3.1 Check if the thermostat switch is on the maximum position.
3.2 When you feel the room temperature comfortable, turn the thermostat switch
anti-clockwise slowly to the minimal position until the appliance stops working.
Then the thermostat switch will keep the room temperature at the desired temperature
automatically.
You can also turn the thermostat switch anti-clockwise to the minimum position or turn the
thermostat switch clockwise to maximum position to make the temperature lower or higher.

Specyfikacje produktu

Marka: SVAN
Kategoria: Podgrzewacz
Model: SVCA04CV

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SVAN SVCA04CV, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Podgrzewacz SVAN

SVAN

SVAN SVCA2000RP Instrukcja

13 Stycznia 2025
SVAN

SVAN SVCA26CAT Instrukcja

27 Września 2024
SVAN

SVAN SVCA200SP Instrukcja

19 Września 2024
SVAN

SVAN SVCA603EH Instrukcja

9 Września 2024
SVAN

SVAN SVCA33CAT Instrukcja

4 Września 2024
SVAN

SVAN SVCA03EB Instrukcja

30 Sierpnia 2024
SVAN

SVAN SVCA420LA Instrukcja

26 Sierpnia 2024
SVAN

SVAN SVCA04CV Instrukcja

25 Sierpnia 2024
SVAN

SVAN SVCA15CN Instrukcja

25 Sierpnia 2024
SVAN

SVAN SVCA1200ET Instrukcja

23 Sierpnia 2024

Instrukcje Podgrzewacz

Najnowsze instrukcje dla Podgrzewacz

Trotec

Trotec TDS 75 R Instrukcja

14 Stycznia 2025
Thomson

Thomson THSF022 Instrukcja

14 Stycznia 2025
Breville

Breville the Smart Tilt Control Max LCE308 Instrukcja

14 Stycznia 2025
Breville

Breville BodyZone BZB437 Instrukcja

14 Stycznia 2025
Duux

Duux Edge Oil Instrukcja

14 Stycznia 2025
Dimplex

Dimplex DX 521 Instrukcja

13 Stycznia 2025
Bestron

Bestron AFH211G Instrukcja

13 Stycznia 2025
Vonroc

Vonroc PH503AC Instrukcja

11 Stycznia 2025
JANDY

JANDY VersaFlo Instrukcja

11 Stycznia 2025
Master

Master 215TMHD-KFA Instrukcja

10 Stycznia 2025