Instrukcja obsługi SureFire XSC

SureFire Niesklasyfikowane XSC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SureFire XSC (6 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/6

MICRO-COMPACT HANDGUN LIGHT

XSC-A

USER MANUAL

Revision A 08-2020

71-01-1100

XSC-A

18300 MT. BALDY CIRCLE

FOUNTAIN VALLEY, CA 92708-6122

WWW.SUREFIRE.COM

Patent: 9,551,550

THE SUREFIRE NO-HASSLE GUARANTEE

We’ll do what it takes to keep your SureFire gear running smoothly.

SureFire warrants that if you — our customer — purchase one

of our products, and we determine that it is defective in material

and/or workmanship during your lifetime, we will repair or replace

it — no hassle!

Our warranty does not cover consumables or normal wear-and-tear

— things like batteries draining, headbands and headpads wearing

out, ink cartridges running out, and switches wearing out — or

damage resulting from abuse, alterations, unauthorized repairs, or

use contrary to SureFire’s user manuals.

Should you need a replacement product, SureFire reserves the

right to replace an obsolete product with a current production,

like model. In the event that any issue with a SureFire product is

not covered under this warranty SureFire can arrange to have the

product repaired for a reasonable fee.

STANDARD DISCLAIMER

Except as speciﬁed above or prohibited by applicable law: all express

or implied conditions and warranties, including, without limitation,

any implied warranty or condition of merchantability or ﬁtness for

a particular purpose, or accuracy of any informational content, are

hereby excluded and disclaimed by SureFire; and in no event will

SureFire be liable for any special, direct, indirect, consequential,

incidental or punitive damages howsoever arising and regardless

of the theory of liability, even if advised of the possibility of such

damages. Products, prices, availability, speciﬁcations, and offers

are subject to change or cancellation at any time without notice.

WARRANTY CLAIMS

For claims, contact Customer Service at 714-545-9444 to obtain a

Return Merchandise Authorization number (RMA#). Then package

the unit carefully and send to (no CODs):

SureFire, LLC.

Repairs Department, RMA#____

17680 Newhope Street, Suite B

Fountain Valley, CA 92708

SureFire will pay any reasonable shipping costs to return the unit to you.

XSC-A

OUTPUT 350 lumens

RUNTIME 30 minutes

PEAK BEAM INTENSITY 2,000 candela

DISTANCE 90 meters

CONSTRUCTION Aluminum

FINISH Mil-Spec Hard Anodized

WEIGHT (w/batteries) 1.7 ounces / 48.2 g

LENGTH 1.94 inches / 4.9 cm

BEZEL DIAMETER 0.78 inches / 1.9 cm

BATTERIES One proprietary rechargeable lithium polymer 3.7V battery

SWITCHING Ambidextrous momentary/constant

All performance claims tested to ANSI/NEMA FL1-2009 Standard.

SPECIFICATIONS

B12 (XSC BATTERY) RATING/PERFORMANCE

TYPE Lithium Polymer w/PCM

and fuel gauge

VOLTAGE 3.7V

CERTIFICATION UN38.3

CHARGE END VOLTAGE 4.2V

DISCHARGE END VOLTAGE 2.7V

ENERGY 0.74Wh

LITHIUM CONTENT 0.06g

OPERATING TEMP RANGE

(Charging) 0-45C

OPERATING TEMP RANGE

(Discharging) -10--65C

RATED CAPACITY 200mAh

STANDARD CHARGE RATE 0.5C

STORAGE TEMP RANGE -10-45C

USB CHARGE CURRENT 100mA

USB CHARGE VOLTAGE 5V

WEIGHT 11.5g

BATTERY PACK SPEC TABLE:

FIGURE 4

KIT CONTENTS:

• XSC-A WeaponLight

• B12 Lithium Polymer Battery

• CH21 Cradle Charger

• MICRO-USB to USB Cable

MOUNTING XSC TO A HANDGUN

BATTERY INSTALLATION

Position battery below XSC and insert until it clicks into place (Figure 3).

BATTERY REMOVAL

Press battery latch lock forward toward the direction of the beam

and then pull the battery downward (Figure 4).

LIGHT OPERATION

The XSC is designed to allow support-hand activation in both

momentary-on and constant-on modes when ﬁring right- or

left-handed.

TOGGLE SWITCHING

Momentary-on activation Depress and hold either toggle

switch for more than a tenth of a second or as long as needed to

momentarily activate the XSC. Release to turn off. (Figure 6).

Constant-on activation with toggle switches: The XSC is

programmed for constant-on activation by a quick tap and

release action via either toggle switches. (Figure 6).

NOTE: The light will not activate when rear switches are

pushed upward or side-to-side. This intentional design feature

minimizes unintended activation when drawing or holstering.

MAINTENANCE

Use a clean, dry cloth to wipe off body and window.

For additional tips on maintaining your SureFire illumination tool,

visit www.sureﬁre.com/faqs-maintenance.

ACCESSORIES

SureFire makes a full line of accessories for most of its

illumination tools. For a complete listing,

visit www.sureﬁre.com/partsaccessories.

1. Loosen Rail-Adjustment Bolt by turning counterclockwise to adjust

gap between stationary and movable Rail Guide until gap is suf-

ﬁciently wide to ﬁt over weapon accessory rail (Figure 1).

2. Align Fixed Rail with weapon’s accessory rail and hinge XSC over the

cross slot of host weapon.

3. Mate Crossmember with slot in weapon’s accessory rail (Figure 2).

4. Tighten Rail-Adjustment Bolt clockwise hand tight then use a coin or

ﬂat head screw driver to further tighten bolt no more than a 1/4 turn.

Do NOT overtighten!

FIGURE 5

FIGURE 1

CROSS

MEMBER

FIGURE 3

BATTERY

LATCH

LOCK

FUEL GAUGE LED INDICATOR

LEDS BATTERY CAPACITY

0-15%

16-50%

51-80%

81-100%

= blinking = off = on

BATTERY CHARGING

The B12 battery needs to be removed from the XSC and placed into

the CH21 battery charger to charge.

HOW TO CHARGE THE BATTERY

1. Insert the MICRO-USB cable plug into the CH21 battery charger.

2. Insert the USB cable plug into a power source.

3. Insert the B12 battery into the CH21 charger (Figure 5).

NOTE: The three fuel gauge LEDs on the side of the battery

will illuminate according to the chart below while charging

and discharging.

FIGURE 6

FIGURE 2

RAIL-ADJUSTMENT

BOLT

PUSH FORWARD

OR DOWN

TO ACTIVATE

MOMENTARY-ON

QUICKLY TAP AND RELEASE

TO ACTIVATE CONSTANT-ON

3 LEDS/

FUEL GAUGE

BEAM

DIRECTION

SLIDE BATTERY LATCH LOCK

FORWARD TO REMOVE B12 BATTERY

MICRO-COMPACT HANDGUN LIGHT

XSC-HELLCAT

USER MANUAL

Revision A 08-2020

71-01-1117