Instrukcja obsługi SureFire Vampire Scout M323V

SureFire Niesklasyfikowane Vampire Scout M323V

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SureFire Vampire Scout M323V (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
KE1-H KE2-B KXIB KE2-DF KM1-E KM2-C
OUTPUT 500 lumens 1,000 lumens High: 600 lumens
Low: 100 lumens
18650: 1,500 lumens
123A: 1,200 lumens
WH: 250 lumens
IR: 100 mW
WH: 350 lumens
IR: 120 mW
RUNTIME 1.0 hours 1.25 hours High: 1.5 hours
Low: 5 hours
18650: 1.5 hours
123A: 1.25 hours
WH: 1.5 hours
IR: 6 hours
WH: 2.5 hours
IR: 16.75 hours
PEAK BEAM
INTENSITY 7,600 candela 11,300 candela 14,750 candela 18650: 16,000 candela
123A: 12,800 candela 9,300 candela 12,750 candela
DISTANCE 175 meters 213 meters 243 meters 18650: 250 meters
123A: 220 meters 190 meters 225 meters
BEZEL DIAMETER 1.125 in (2.9 cm) 1.125 in (2.9 cm) 1.37 in. (3.48 cm) 1.125 in (2.9 cm) 1.06 in (2.7 cm) 1.06 in (2.7 cm)
CONSTRUCTION Aluminum
FINISH Hard Anodized (MIL-A-8625 Type III, Class 2)
All performance claims tested to ANSI/NEMA FL1-2019 Standard.
SPECIFICATIONS
ScOut LigHt® uSER MANuAL
THE SUREFIRE NO-HASSLE GUARANTEE
We’ll do what it takes to keep your SureFire gear running smoothly.
SureFire warrants that if you our customer purchase one
of our products, and we determine that it is defective in material
and/or workmanship during your lifetime, we will repair or replace
it — no hassle!
Our warranty does not cover consumables or normal wear-and-tear
things like batteries draining, headbands and headpads wearing
out, ink cartridges running out, and switches wearing out or
damage resulting from abuse, alterations, unauthorized repairs, or
use contrary to SureFire’s user manuals.
Should you need a replacement product, SureFire reserves the
right to replace an obsolete product with a current production,
like model. In the event that any issue with a SureFire product is
not covered under this warranty SureFire can arrange to have the
product repaired for a reasonable fee.
STANDARD DISCLAIMER
Except as specified above or prohibited by applicable law: all express
or implied conditions and warranties, including, without limitation,
any implied warranty or condition of merchantability or fitness for
a particular purpose, or accuracy of any informational content, are
hereby excluded and disclaimed by SureFire; and in no event will
SureFire be liable for any special, direct, indirect, consequential,
incidental or punitive damages howsoever arising and regardless
of the theory of liability, even if advised of the possibility of such
damages. Products, prices, availability, specifications, and offers
are subject to change or cancellation at any time without notice.
WARRANTY CLAIMS
For claims, contact Customer Service at 714-545-9444 to obtain a
Return Merchandise Authorization number (RMA#). Then package
the unit carefully and send to (no CODs):
SureFire, LLC.
Repairs Department, RMA#____
17680 Newhope Street, Suite B
Fountain Valley, CA 92708
SureFire will pay any reasonable shipping costs to return the unit to you.
MAINTENANCE
Use a clean, dry cloth to wipe off body and window. Periodically clean
and lubricate threads. Apply a thin coat of non-migrating, silicon-based
lubricant to O-rings (do not use petroleum-based lubricants which
can harm O-rings). For additional tips on maintaining your SureFire
illumination tool, visit www.surefire.com/faqs-maintenance.
ACCESSORIES
SureFire makes a full line of accessories for most of its illumination
tools. For a complete listing, visit www.surefire.com/partsaccessories.
Revision D 2-2021
71-01-1052
18300 MT. BALDY CIRCLE,
FOUNTAIN VALLEY, CA 92708-6122
SUREFIRE.COM USER MANUAL
M600U-Z68 Shown
ScOut LigHt® uSER MANuAL & cONFiguRAtOR
MOUNTING TO WEAPON
M75: Unscrew mount nut, position onto weapon, tighten nut until
hand tight and then use a flat tool in the slot to tighten another 1/4
turn. Do not overtighten
RM45: Use a flathead screwdriver to tighten or loosen mount screw
M-AD-SF:
1. Press lock button to unlock the mount and open the lever 180°
2. Place WeaponLight onto the handguard and close the lever
3. The correct amount of tension is when only one hand is needed to
swing the level closed
4. To adjust lever tension, open the lever and push the lever towards
the base. The nut will protrude on the opposite side. Turn the nut
right or left one to two flats per time to make the necessary
adjustment and retest the tension
BATTERY INSTALLATION
1. Remove the LED head by unscrewing it counterclockwise and
remove depleted battery(ies)
2. Insert fresh battery(ies) with the positive (+) terminal(s) facing
forward toward the head
WARNING: Do not mix depleted and new batteries
3. Screw LED head back on clockwise until hand tight
LIGHT OPERATION
REMOTE TAPE SWITCHES
ST07: Press pressure pad for momentary activation
SR07: Press pressure pad for momentary activation; click pushbutton
for constant-on
SR07-D-IT: Press pressure pad with bump to activate Weapon Light
Press pressure pad w/o bump to activate auxiliary device
SWITCH HOUSING
Z68: Partially press for momentary activation; click for constant-on
UE: Requires remote tape switch
DS Style: Partially press for momentary activation; click for constant-
on. If a pressure pad is installed, see applicable instructions below
MULTI-SPECTRUM OUTPUT SELECTION (KM1/KM2)
Rotate bezel selector ring clockwise to select white-light or
counterclockwise to select infrared
ScOut LigHt® uSER MANuAL & cONFiguRAtOR
*Not all configurable model numbers may be released as products available for purchase. Go to www.surefire.com to inquire about released models


Specyfikacje produktu

Marka: SureFire
Kategoria: Niesklasyfikowane
Model: Vampire Scout M323V

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SureFire Vampire Scout M323V, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane SureFire

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane