Instrukcja obsługi Sunbeam FC7500

Sunbeam maszyna do cięcia FC7500

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sunbeam FC7500 (24 stron) w kategorii maszyna do cięcia. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/24

Please read these instructions carefully

and retain for future reference.

MultiChopper™

Food Chopper

Instruction Booklet

FC7500

Contents

Important instructions – retain for

future use.

Sunbeam’s Safety Precautions 1

Features of your MultiChopper™ 2

Using your MultiChopper™ 4

Chopping Guide 6

Care and Cleaning 7

Recipes 8

If you have any concerns regarding the performance and use of your appliance,

please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

SAFETY PRECAUTIONS FOR YOUR

SUNBEAM MULTICHOPPER FOOD CHOPPER.

• Always operate on a flat surface.

• Do not operate the appliance without the cover

in place.

• Do not remove the motor housing from the jug

while the blades are still in motion.

• Do not use the appliance continuously for more

than 30 seconds at a time with heavy loads.

• Use extreme care when handling blades as

they are extremely sharp.

• Do not blend hot ingredients.

Sunbeam’s Safety Precautions

Sunbeam is very safety conscious when

designing and manufacturing consumer products,

but it is essential that the product user also

exercise care when using an electrical appliance.

Listed below are precautions which are essential

for the safe use of an electrical appliance:

• Read carefully and save all the instructions

provided with an appliance.

• Always turn the power off at the power outlet

before you insert or remove a plug. Remove

by grasping the plug - do not pull on the cord.

• Turn the power off and remove the plug

when the appliance is not in use and before

cleaning.

• Do not use your appliance with an extension

cord unless this cord has been checked

and tested by a qualified technician or

service person.

• Always use your appliance from a power

outlet of the voltage (A.C. only) marked

on the appliance.

• This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they

have been given supervision or instruction

concerning use of the appliance by a person

responsible for their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

• The temperature of accessible surfaces may be

high when the appliance is operating.

• Never leave an appliance unattended while

in use.

• Do not use an appliance for any purpose

other than its intended use.

• Do not place an appliance on or near a hot gas

flame, electric element or on a heated oven.

• Do not place on top of any other appliance.

• Do not let the power cord of an appliance hang

over the edge of a table or bench top or touch

any hot surface.

• Do not operate any electrical appliance with

a damaged cord or after the appliance has

been damaged in any manner. If damage is

suspected, return the appliance to the nearest

Sunbeam Appointed Service Centre

for examination, repair or adjustment.

• For additional protection, Sunbeam

recommend the use of a residual current

device (RCD) with a tripping current not

exceeding 30mA in the electrical circuit

supplying power to your appliances.

• Do not immerse the appliance in water

or any other liquid unless recommended.

• Appliances are not intended to be operated

by means of an external timer or separate

remote control system.

• This appliance is intended to be used in

household or similar applications such as:

staff kitchen areas in shops, offices and

other working environments; farm houses; by

clients in hotels, motels and other residential

type environments; bed and breakfast type

environments.

Specyfikacje produktu

Marka:	Sunbeam
Kategoria:	maszyna do cięcia
Model:	FC7500

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sunbeam FC7500, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje maszyna do cięcia Sunbeam

Sunbeam FC7500 Instrukcja

5 Października 2024

Instrukcje maszyna do cięcia

Najnowsze instrukcje dla maszyna do cięcia

Royal Catering RCAM-250E Instrukcja

14 Października 2024

Royal Catering RCAM-250PRO Instrukcja

14 Października 2024

Royal Catering RCAM-250EXPERT Instrukcja

14 Października 2024

Princess Classic Multi Food Slicer 492977 Instrukcja

10 Października 2024

Melissa 16220009 Instrukcja

9 Października 2024

Severin AS 3914 Instrukcja

9 Października 2024

Graef S52200 Instrukcja

8 Października 2024

Cigweld COMET Instrukcja

8 Października 2024

RGV Luxury 25 Instrukcja

8 Października 2024

Weston 36-3551-W Instrukcja

8 Października 2024