Instrukcja obsługi Sun Pumps PCA-30M1D

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sun Pumps PCA-30M1D (17 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/17
Table of Contents
Introduction ………………………………………………………………………... 1.0
Precautions
Product Overview …………………………………………………………………. 2.0
Controller Features ………………..………………………………………………. 2.1
Application ………………………………………………………………………... 2.2
Installation and Operations ………………………………………………………… 3.0
Warning
Location …………………………………………………………………………… 3.1
System Design B 3.2 asics ……………………………………………………………...
Figure 1: Solar Pump System Terms and Head Calculations
Well Measurements ……………………………………………………………… 3.3
Pump Installation ………………………………………………………………….. 3.4
Wiring 3.5………………………………………………………………………………
Figure 2: Control Panel
Figure 3: Dip Switch Settings
Controller Settings ………………………………………………………………… 3.6
Auxiliary Control Circuits .. ... …………………………………………… ……… 3.7
Remote Switch
Low Water Shut-Down Circuit
Power Limit (Speed Control)
Troubleshoot ing …………………………………………………………...……….. 4.0
Controller does not turn on
Controller turns on but pump does not run
Pump is running but the output is low
Pump draws excessive current
Before Calling Sun Pumps
Before Calling SunPumps …………………………………………………………... 5.0
Warranty Statement ………………………………………………………………… 6.0
Phone (928) 348-9652 Fax (928) 348-9653
1.0 Introduction
Thank you for selecting a SunPumps SD series solar pump system. The SDS series pump and PCA- -S 30
M1D series pump controller are the key components to high quality solar powered pumping systems. Their
stand-alone, pollution free operation makes them an ideal solution for remote homes, irrigation projects,
and wildlife and stock watering without violating the environment.
SunPumps SDS series pumps are diaphragm type, DC powered, submersibles constructed of high quality
stainless steel for the SDS-D and SDS-Q series pumps and Ryton and stainless steel for the SDS-T series
pumps. These pumps were designed specically for water delivery in remote locations .
The PCA series controllers are microprocessor based solid state DC power converters designed as the
interface between a solar module array and the SDS series DC pump motor. The purpose of the controller
is to operate the high eciency, high reliability DC motor and maximize the total daily water output while
providing protection for the pump as well as providing an interface with other related pumping system
equipment.
Although these SDS series pump systems are easy to install, please read this manual to become
familiar with the controller features, functions, connection points and various configurations. For
future reference, keep this manual and other relevant product information in a safe place.
PRECAUTIONS
Safety First Always understand what you are doing when working with any form of
electricity. Guessing may cause product damage and/or severe personal injury.
Shut down all power when working on the system.
Do not attempt to feed live wires into the PC-series controller. P duct damage and/or ro
personal injury may result.
Do not exceed the voltage rating of the controller.
Do not set the controller to exceed the power rating of the motor.
Do not splash water on the controller when the cover is open.
Mount the controller in a shaded, well vented position, vertical .
2.0 Product Overview
The SunPumps PCA- -M series controllers were designed specically for SunPumps SDS-series, DC 30 1D
submersible pumps. When properly installed and congured, the unique features incorporated into this
stand-alone system will automatically control and protect your pump system permitting many years of
dependable, trouble free service.
When used as a solar electric panel direct system the PCA series controllers will provide pump protection
from ov -voltage and over-current conditions as well as current boosting in low sunlight conditions. er
2.1 Controller Features
1. Current boosting for matching the load requirements of the pump.
2. Voltage regulation of the solar electric array around its maximum power point. (MPPT)
3. Over-current protection via integrated electronic circuit breaker.
4. Voltage and current limiting to pump motor..
5. Adjustable output motor power control for precision output ow.
6. System ON/OFF switch.
7. L indicators; 1 Power In, 2. Motor R , 3. Remote Switch 4. Over-Current, 5. Low Water ED . un ,
Cut-O

Specyfikacje produktu

Marka: Sun Pumps
Kategoria: Niesklasyfikowane
Model: PCA-30M1D

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sun Pumps PCA-30M1D, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Sun Pumps

Sun Pumps

Sun Pumps PCA-30M1D Instrukcja

20 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024