Instrukcja obsługi Stomer SHG-2000
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Stomer SHG-2000 (44 stron) w kategorii Overig. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/44
User’s Manual . . . . . . . . . . . . . . . . . 3
Bedienungsanleitung . . . . . . . . . . . . 4
Mode d’emploi . . . . . . . . . . . . . . . . . 6
Instrucciones de servicio . . . . . . . . . 7
Manual de instruções . . . . . . . . . . . . 9
Istruzione per l’uso . . . . . . . . . . . . . 10
Gebruiksaanwijzing . . . . . . . . . . . . 12
Bruksanvisning . . . . . . . . . . . . . . . . 13
Käyttöohje. . . . . . . . . . . . . . . . . . . . 15
Bruksanvisning . . . . . . . . . . . . . . . . 16
Brugervejledning. . . . . . . . . . . . . . . 18
Használati utasítás . . . . . . . . . . . . 19
Manual de utilizare . . . . . . . . . . . . . 20
Οδηγίες χρήσεως . . . . . . . . . . . . . . 21
Instruksja obsługi . . . . . . . . . . . . . . 23
Návod k použití. . . . . . . . . . . . . . . . 24
Navodilo za uporabo. . . . . . . . . . . . 26
Uputstvo za korisnike . . . . . . . . . . . 27
Upute za uporabu . . . . . . . . 28
Kullanım kılavuzu . . . . . . . . . . . . . . 29
. . . . . . . . . . . . . . 30
Инструкция по эксплуатации . . . . 31
Інструкція з експлуатації. . . . . . . . 32
Қолданысы бойынша нұсқама . . . 33
Instrukcija . . . . . . . . . . . . . . . . . . . . 34
Instrukcija . . . . . . . . . . . . . . . . . . . . 35
Kasutusjuhend . . . . . . . . . . . . . . . . 36
SHG-2000
98299007
2
8 u
MNJO
LHu$7
)[
¯¯
0''
NPEF¯MNJO
NPEFu¯MNJO
NPEFu¯MNJO
¯
0
3
Hot air gun
CAREFULLY READ THE INSTRUCTIONS BEFORE
YOU USE THE HOT AIR GUN!
1. ADDITIONAL SAFETY RULES
BEFORE USING THE APPLIANCE:
1. Check the following:
- Make sure the voltage of the hot air gun corresponds
with the power voltage.
- Are the mains lead and the mains plug in a good
state: strong, without ravels or damages.
2. Avoid the use of long extension cables.
3. Do not use the appliance under moist circumstances.
4. The metal mouthpiece gets hot. Watch out and do not
touch the metal mouthpiece.
5. Prevent damage of the heating element. Do not lock
or block the mouthpiece.
6. Do not leave the appliance when switched on.
7. When the appliance is not in use, it can be put away
on the collapsible support, which is on the air gun. By
collapsing this support, the air gun can easy be put
away on it. The hot air gun now stands on the support
with the mouthpiece up.
8. Do not use the appliance for drying hair or for drying
living human beings in general.
9. Do not use the appliance in a bath, above water or in
spaces where easy infl ammable liquids are used.
Warning! This appliance operates at a temperature
of 200-600 degrees without visible signs of this
temperature (no fl ames); still there is a chance of
fi re risk. Watch out for the hot air stream from the
mouthpiece. This air stream can cause burns.
WHEN OPERATING THE APPLIANCE:
1. If you are going to use the hot air gun, vapours and
gas can be liberated during a short time. This can
be harmful for your health. Asthmatics can suffer hin-
drance of it.
2. Before connecting the plug to the mains voltage you
have to check if the switch is in position “0”.
3. Keep the mains lead always away from the mouth-
piece of the hot air gun.
4. Keep children and animals away from the appliance
if you are using it.
IMMEDIATELY SWITCH OFF THE APPLIANCE WHEN:
1. plug and/or cable are defective or damaged;
2. the switch is defective;
3. you smell or see smoke caused by scorched insula-
tion from the hot air gun.
2. INSTALLATION
You can work manually with this hot air gun or you
can put it in a vertical position. If you use the vertical
position the metal suspension bracket of the handgrip
must also stand vertical for supporting the handgrip on
the correct place.
3. USING THE APPLIANCE
THE HOT AIR GUN CAN BE USED FOR:
• plumbing work like tube connections, solder, bowing
tubes;
• removing paint, varnish and lacquer without fi re-risk;
• quickly drying of appliances which have become wet;
• drying surfaces for quick repairing;
• removing self-adhesive labels in a clean way;
• placing PVC labels;
• blistering after sticking PVC materials can be smoo-
thed after heating;
• easy removing of vinyl carpeting;
• forming all synthetics with a low temperature among
which polyethylene and PVC;
• forming all synthetics with a high temperature among
which acryl and plexiglass;
• smelting synthetics, among which matters and foils
with PVC layer;
• applying heat shrinking tubes;
• shrink wrappers;
• thawing tubes and engines;
• repairing fi nishing layers: email of bath and house-
hold appliances;
• applying epoxy powder cover layers;
• repairing of ski's, surf-boards and other sports goods;
• unscrewing too fast fi xed screws and connections.
4. BEFORE OPERATING
Before you switch on the hot air gun you have to
search for the right adapter for the mouthpiece and as-
semble it on the mouthpiece if it is still cold.
IMPORTANT: Replace the mouthpiece only:
• with a stationary engine;
• when the appliance is disconnected;
• when the mouthpiece is cold.
5. OPERATION
• Check if the mains switch is on position “0” before
you connect the apparatus;
• Keep the power voltage always away from the hot air
stream and the mouthpiece.
Tip: If you want to get the best result, test all applian-
ces on a little part of the workpiece.
GB English
Specyfikacje produktu
Marka: | Stomer |
Kategoria: | Overig |
Model: | SHG-2000 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Stomer SHG-2000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Overig Stomer
16 Września 2024
Instrukcje Overig
- Overig Milwaukee
- Overig Stihl
- Overig Bosch
- Overig Parkside
- Overig Festool
- Overig Panasonic
- Overig Stanley
- Overig Scheppach
- Overig DeWalt
- Overig Einhell
- Overig Makita
- Overig RYOBI
- Overig Flex
- Overig AL-KO
- Overig Güde
- Overig ATIKA
- Overig Airpress
- Overig Ferrex
- Overig Digi
- Overig TurboTronic
- Overig Fein
- Overig Ferm
- Overig PowerPlus
- Overig Vonroc
- Overig Workzone
- Overig Sievert
- Overig Skil
- Overig Laserliner
- Overig Alpina
- Overig Altrex
- Overig Brennenstuhl
- Overig Sparky
- Overig Zodiac
- Overig Renovator
- Overig Turbotech
- Overig Varo
- Overig Defort
- Overig Max
- Overig Eliet
- Overig Probuilder
- Overig Rupes
- Overig Heidenhain
- Overig Xenteq
- Overig Tecomec
- Overig NDS
- Overig Bostitch
- Overig Kompernass
- Overig Triton
- Overig Ateq
- Overig Ergofix
- Overig PLS - Fluke
- Overig Datona
Najnowsze instrukcje dla Overig
19 Września 2024
19 Września 2024
18 Września 2024
18 Września 2024
18 Września 2024
18 Września 2024
17 Września 2024
16 Września 2024
16 Września 2024
15 Września 2024