Instrukcja obsługi SSV Works RZ3-1KRC

SSV Works głośnik RZ3-1KRC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SSV Works RZ3-1KRC (9 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/9
Disassembly, Wire and
Amplier Plate Installation
Glovebox Subwoofer
Installation
pg 2
pg 6
RZ3-1KRC
RZR XP1000 & 2015+ RZR900
with Ride Command
SSV Works Subwoofer Audio Kit
2
RZR XP1000 & 2015+ RZR900
Amp Tray and Wiring Installation
!
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in
material or workmanship. All SSV Works Electronics are covered by a limited 1 year warranty
against defects in material or workmanship. All Kicker Speakers are covered by a limited 1
year warranty against defects in material or workmanship. All Kicker Ampliers are covered by
a limited 2 year warranty against defects in material or workmanship. Labor for replacement
of defective components is not covered. Contact SSV Works for further warranty information.
TOOLS NEEDED FOR INSTALLATION
- T30 & T40 Torx Socket
- 10mm and 5.5mm Socket
& Rachet or Wrench
- 4mm & 5mm Allen Wrench
- #2 & #3 Phillips Screwdriver
PARTS LIST IMAGES
3. M6 x 1.0 Screws x 1
6. Battery Terminal Cable
4. M6 Washer x 1
7. Zip Ties x 5
1. Amp Power Wire 2. Direct-t Amp Plate with
pre-tuned Amp with Ride
Command harness
5. Fuse Holder with 40A Fuse
- Drill with 1/8”, 1/4” & 1/2”
Drill bits
- Panel removal tool
- Wire Crimpers
- Wire Strippers
- Scribe or Marker
- Utility Knife
3
A
PANELS AND DASH DISASSEMBLY
C
E
B
DD
F
A. Remove all seats by releasing the handle behind each seat,
push forward slightly while lifting up.
C. Remove hood by turning locking pins and lifting up.
E. Disconnect all harness connectors attached to the center dash panel.
B. Disconect the negative battery cable from the battery.
D. Remove center dash by unscrewing the (2) T-40 Torx screws and push center
dash forward to unclip.
F. Un-pin and pull to remove the passenger side safely handle.

Specyfikacje produktu

Marka: SSV Works
Kategoria: głośnik
Model: RZ3-1KRC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SSV Works RZ3-1KRC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik SSV Works

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024