Instrukcja obsługi Speco Technologies WB86T


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Speco Technologies WB86T (1 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
WB86T – 70/25V Enclosed Wall Baffle Speaker
Congratulations on your purchase of Speco Technologies’ 70/25 Volt
Wall Baffle Speaker!
The continues Speco Technologies’ heritage of more than 60 years of WB86T
providing the highest quality of performance and reliability for residential and
commercial sound applications. Speco Technologies’ 70/25V wall baffle
speaker was designed with the focus of making the contractor’s work as easy
and time-efficient as possible. With a beautiful wood design, these units
converge strong specifications and installer-friendly features to bring sound
seamlessly into a commercial outdoor environment without sacrificing any
aesthetic beauty. Constructed of the finest materials, coupled with a fine-mes
integrated grille, these speakers will provide countless years of performance a
sound enjoyment to your listening environment for all occasions.
INSTALLATION INSTRUCTIONS:
1. It is important that before making any wire connections with your sp
source, amplifier and/or receiver, is completely off!
2. First, determine whether your speaker will be used in a 70 Volt, 25 Vo
3. There is a slider switch to select between 70V and 25V on the side of the speaker.
4. The transformer dial is also on the side of the speaker. Determine which wattage tap best meets the sound need of the
environment the speaker will be utilized in. A choice of 0.625, 1.25, 2.5, 5 and 10 watts is provided, with the higher
wattage settings made available for louder sound environments. Upon making your selection, carefully turn the
transformer dial to the proper setting. The transformer dial can be removed once the selection has been made. Simply
pull it outwards.
5. For an 8 ohm speaker requirement, turn the transformer dial to the 8 ohm indication. This automatically overrides the
transformer within the unit and the Voltage Selector switch.
6. Once the wattage tap is determined for the speaker, the speaker must be wired.
7. Connect the positive wire coming from your amplification source into the red push terminal on the back of the speaker.
8. Likewise, connect the black common push terminal with the common wire running back to your amplification source.
9. For a commercial application where multiple speakers are required, the speaker wire must utilize a parallel run. Never
use a series run with commercial speakers.
10. This speaker is hung using the traditional “teardrop” style hook on the back. Simply drill a screw into the wall where
you wish to install the speaker, leaving at least ¼” room. Then, slide the wide portion of the teardrop over the head of
the screw, and gently lower it.
Speco Technologies is constantly developing and improving products.
We reserve the right to modify product design and specifications without notice and without incurring any obligation.
Speco Technologies . 200 New Highway . Amityville . NY . 11701 . www.specotech.com
Rev. 05/06/20


Specyfikacje produktu

Marka: Speco Technologies
Kategoria: głośnik
Model: WB86T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Speco Technologies WB86T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Speco Technologies

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024