Instrukcja obsługi Speco Technologies SP6MAWT


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Speco Technologies SP6MAWT (1 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
For more information contact Speco Technologies
200 New Highway, Amityville, NY 11701• Toll Free: 1-800-645-5516•Fax: 631-957-9142 or 631-957-3880•www.specotech.com
Speco Technologies is constantly developing and improving products.
We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 8/1/12
SP6MAWT 6.5” Enclosed 70V/25V In-Wall Speaker System
Thank you for your choice of Speco Technologies’ Speaker. This unit is designed to provide a wall-SP6MAWT
mount alternative for background music or paging in commercial, public or residential environments. The
enclosed, in-wall design offers mounting opportunities not always available to standard in-ceiling speakers.
INSTALLATION INSTRUCTIONS:
1) Carefully remove the speaker from its protective packaging. SP6MAWT
2) The comes complete with a built-in, easy-select transformer. The transformer dial and voltage SP6MAWT
selector switch are located behind the grill. Quickly and easily remove the grill by grabbing mounting legs
on opposite sides of the speaker, and pushing towards the front. The legs will push the grill off.
3) The transformer has settings of 40 Watts, 30W Watts, 15 Watts, 7.5 Watts, 5 Watts, 2.5 Watts, 1 Watts,
0.5 Watts & 8 Ohms. The wattage settings are for use with 70V or 25V amplifiers, typically used in
commercial environments and selected by a built-in switch. The 8 Ohm setting is for use with constant
impedance 8 Ohm amplifiers, typically in residential environments. Select the setting that best matches
your amplifier and installation.
Warning: Using a transformer selection that does not match the output from your amplifier can
damage the amplifier or speaker. Make sure all settings are correct before powering the amplifier.
For information on the differences between 70V & 8 Ohm, ask your distributor for the Speco Technologies Commercial Audio Guide.
4) This speaker has mounting dimensions of 10.75” H x 7.5W, with a minimum in-wall depth requirement
of 4.13”. There is no in-wall mounting bracket available for this speaker.
5) We recommend using 14 or 16 AWG speaker wire for optimal performance. Connect the wire to the
corresponding terminal, located on the bottom rear of the speaker. Red (+) and Black (-) terminals are
provided.
6) Insert the speaker into the cutout, and secure the speaker in the wall by tightening each of the 6 built-in
mounting legs.
7) Replace the grill.
SPECIFICATIONS:
6.5” Fiberglass Woofer with Rubber Surround
1” Titanium Dome Tweeter
Total Frequency range: 50Hz ~ 20kHz
40 Watt RMS/ 80 Watt Max
Sensitivity: 89 +/- 3dB
WARRANTY INFORMATION:
We warranty this product to be free from any manufacturing or material defects for as long as you own the speaker. (Non-transferrable,
LIFETIME WARRANTY)
This warranty will not extend to any products which have been subjected to misuse, neglect, accident, or improper installation, used in violation
of instructions furnished by us; or to units which have been repaired or altered outside of the factory. This limited warranty does not apply to
broken cases, batteries, or other physically damaged parts.
Upon request by the customer, Speco Technologies (“The Company”) will, at the customer's expense, repackage merchandise in new cartons,
replace missing accessories, and return in resalable condition. Unless requested, the company will replace and return all merchandise in the
packaging in which it was received. This warranty is in lieu of all expressed warranties, expressed or implied, and of all obligations or liability on
our part, and we neither assume nor authorize any representative or other person to assume for us any obligation or liability. In no event shall
we be liable for incidental or consequential damages arising from the use of the product, or for any delay in the use of this product due to
causes beyond our control. Some states do not allow limitations of how long an implied warranty lasts and/or do not allow the exclusion or
limitation of consequential damages. The above limitations on implied warranty and consequential damages may not apply to you. This
warranty gives you specific legal rights. You may have other rights which vary from state to state. See actual warranty statement included with
product for limitations and exclusions where applicable. This limited warranty extends to products listed in the company's current price
schedule.


Specyfikacje produktu

Marka: Speco Technologies
Kategoria: głośnik
Model: SP6MAWT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Speco Technologies SP6MAWT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Speco Technologies

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024