Instrukcja obsługi Speco Technologies SPRK65CBT

Speco Technologies głośnik SPRK65CBT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Speco Technologies SPRK65CBT (1 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/1
SPRK65CBT / SPRK65CGT 70/25V Rock Speaker System
Congratulations on your purchase of Speco Technologies’ 70/25
Rock Speaker System!
The Rock Speaker System continues SpSPRK65CBT / SPRK65CGT
Technologies’ heritage of more than 60 years of providing the hig
quality of performance and reliability for residential and commer
sound applications. Speco Technologies’ 70/25V Rock Speaker
System was designed with the focus of making the contractor’s
work as easy and time-efficient as possible. With a realistic rock
design, our fully weatherproof units converge strong specificatio
and installer-friendly features to bring sound seamlessly into a
commercial outdoor environment without sacrificing any aesthet
beauty. A stealthy, easy select transformer wattage dial and 70/25 volt selector switch aids the contractor in an easy and time-
efficient installation while security loops on each side of the speaker permit permanent securing to the ground, a necessity in
public arenas. Constructed of a high-end polymer, coupled with a fine-mesh, integrated grille, these speaker systems will
provide countless years of performance and sound enjoyment to your outdoor listening environment for all occasions.
FEATURES
• 6.5” Mica Cone Woofer with Rubber Surround and 1” PEI Dome Tweeter
• Frequency Response: 90Hz-20KHz
• 40 Watt RMS/ 60 Watt Max Power
• 70/25V Transformer
• Transformer Settings: 30/15/7.5/3.75 & 8 ohm
• Fully Weatherproof
• Sold Individually
INSTALLATION INSTRUCTIONS:
1. It is important that before making any wire connections with your rock speaker that your power source, amplifier
and/or receiver, is completely off!
2. First, determine whether your rock speaker will be used in a 70 Volt, 25 Volt or 8 ohm application.
3. Turn the rock upside down and adjust the 25/70V selector switch in the recessed cavity to the desired setting so it will
be matched to the speaker wiring coming from the amplification output from the power source.
4. Next, determine which wattage tap best meets the sound need of the environment the speaker will be utilized in. A
choice of 3.75, 7, 15 and 30 watts is provided, with the higher wattage settings made available for louder sound
environments. Upon making your selection, carefully turn the recessed transformer dial to the proper setting.
5. For an 8 ohm speaker requirement, turn the transformer dial to the 8 ohm indication. This automatically overrides the
transformer within the unit and the Voltage Selector switch.
6. Once the wattage tap is determined for the speaker, the speaker must be wired.
7. Each 70/25V Rock Speaker has a weatherproof, wrapped wire coming out of the bottom of the rock that branches and
exposes a red positive wire and a black common wire at the end.
8. Connect the red positive wire to the positive wire coming from your amplification source by tightly twisting and
intertwining the two positive wires together.
9. Likewise, connect the black common rock speaker wire with the common wire running back to your amplification
source by twisting them tightly together. After secure connections are made, use thick, weatherproof, electrical tape to
completely cover the connections many times over thus protecting it from any weather elements and moisture.
10. For a commercial application where multiple speakers are required, the speaker wire must utilize a parallel run. Never
use a series run with commercial speakers.
11. A completely weatherproof, 14 AWG wire is recommended for the connection of your rock speaker to your amplifier.
12. Many rock installers bury the speaker wires underground to keep them from view. Make sure that your connection is
completely protected from any moisture by a thick wrapping of weatherproof electrical tape if this is your preference.
Speco Technologies is constantly developing and improving products.
We reserve the right to modify product design and specifications without notice and without incurring any obligation.
Speco Technologies . 200 New Highway . Amityville . NY . 11701 . www.specotech.com
Rev. 05/06/20

Specyfikacje produktu

Marka: Speco Technologies
Kategoria: głośnik
Model: SPRK65CBT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Speco Technologies SPRK65CBT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Speco Technologies

Speco Technologies

Speco Technologies SPC15R Instrukcja

17 Września 2024
Speco Technologies

Speco Technologies SP-5CLCC Instrukcja

16 Września 2024
Speco Technologies

Speco Technologies SPC40RP Instrukcja

16 Września 2024
Speco Technologies

Speco Technologies SP6MAWT Instrukcja

16 Września 2024
Speco Technologies

Speco Technologies DMS-3TSW Instrukcja

16 Września 2024
Speco Technologies

Speco Technologies SPC10T Instrukcja

15 Września 2024
Speco Technologies

Speco Technologies SP6ECS Instrukcja

15 Września 2024
Speco Technologies

Speco Technologies SPRK65CGT Instrukcja

15 Września 2024
Speco Technologies

Speco Technologies SP525C Instrukcja

15 Września 2024
Speco Technologies

Speco Technologies WB86T Instrukcja

15 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024