Instrukcja obsługi Speco Technologies SPC104

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Speco Technologies SPC104 (1 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
S
SP
PC
C1
10
0/
/S
SP
PC
C1
10
04
4
– PA Speaker Horn
Thank you for your choice of Speco Technologies’ PA Speaker Horn. This unit is designed and SPC10/SPC104
manufactured to provide a reliable source for any Public Address or sound application. The weatherproof
aluminum construction ensures long-life in outdoor environments, but the is also suitable for SPC10/SPC104
indoor use.
INSTALLATION INSTRUCTIONS:
1) The is constructed with a pivoting, metal bracket. SPC10/SPC104
2) Loosen the nuts connecting the metal bracket to the horn to pivot the base to the desired angle.
3) Tighten the nuts to lock the horn at the desired angle.
4) The base contains 3 holes for screws. Use screws with greater than 3/8” diameter head to ensure safe
installation.
5) Connect the red/grey (positive) and grey (negative/ground) wires to the corresponding 8 Ohm (SPC10) or
4 Ohm (SPC104) outputs on your amplifier.
SPECIFICATIONS:
Frequency Response: 250Hz ~ 15kHz
Max Power: 15W
Sensitivity: 105dB 1W/1M
Impedance: SPC10 – 8 Ohms
SPC104 – 4 Ohms
Size: 6” Diameter x 5-7/8” Length
Weatherproof aluminum construction
WARRANTY INFORMATION:
We warranty this product to be free from any manufacturing or material defects for two (2) years from the date of purchase.
This warranty will not extend to any products which have been subjected to misuse, neglect, accident, or improper installation, used in violation
of instructions furnished by us; or to units which have been repaired or altered outside of the factory. This limited warranty does not apply to
broken cases, batteries, or other physically damaged parts.
Upon request by the customer, Speco Technologies (“The Company”) will, at the customer's expense, repackage merchandise in new cartons,
replace missing accessories, and return in resalable condition. Unless requested, the company will replace and return all merchandise in the
packaging in which it was received. This warranty is in lieu of all expressed warranties, expressed or implied, and of all obligations or liability on
our part, and we neither assume nor authorize any representative or other person to assume for us any obligation or liability. In no event shall
we be liable for incidental or consequential damages arising from the use of the product, or for any delay in the use of this product due to
causes beyond our control. Some states do not allow limitations of how long an implied warranty lasts and/or do not allow the exclusion or
limitation of consequential damages. The above limitations on implied warranty and consequential damages may not apply to you. This
warranty gives you specific legal rights. You may have other rights which vary from state to state. See actual warranty statement included with
product for limitations and exclusions where applicable. This limited warranty extends to products listed in the company's current price
schedule.
Speco Technologies is constantly developing and improving products.
We reserve the right to modify product design and specifications without notice and without incurring any obligation.
Speco Technologies 200 New Highway Amityville NY 11701 www.specotech.com
Rev. 04/03/20

Specyfikacje produktu

Marka: Speco Technologies
Kategoria: nieskategoryzowany
Model: SPC104

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Speco Technologies SPC104, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Speco Technologies

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024