Instrukcja obsługi Speco Technologies HT7246T2

Speco Technologies nieskategoryzowany HT7246T2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Speco Technologies HT7246T2 (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
200 New Highway, Amityville, NY 11701
800 645- -5516 / www.specotech.com
FEATURES
Intensifier® Series HD-TVI 1080p 2MP Dome Camera
Wall/Ceiling Mount, UTC, 2BNC out for TVI & CVBS, Dual voltage
HT7246T2 – 2.8~12mm auto iris lens, dark gray housing
SPECIFICATIONS
Image Sensor.................. 1/ ” 2.9 Progressive Scan CMOS, 2MP
Minimum Illumination....... 0.001 lux (Sens- )up X32
Effective Pixels................ 1984 1105 (H) x (V)
Total Pixels...................... 2000 (H) x 1121 (V)
Scanning System............ Progressive
S/N Ratio......................... More than 50dB
Output Resolution............ 1920 30fpsx1080 @
Video Output.................... 1.0 75 Vp-p / Ohms
Electronic Shutter............ Auto / Manual (1/30 – 1/30,000 sec.)
Day / Night....................... Color (default) / BW / External / Auto
Test Monitor Output......... CVBS (Yellow BNC / Connector on Board)
Communication............... UTC (up the coax)
Power............................. 12 24VDC / VAC
Power Consumption........ mA max. (DC), 450 250mA max. (AC)
Operating Temperature.... -40 140° – F ° F
Unit Dimensions.............. 3.97 5.23” (H) x ” (Dia.)
Unit Weight...................... 1.4 lbs (camera), 0.7 lbs (junction box)
Certifications.................... FCC, RoHS
Signal Distance............... Up to 1600 feet
(depending on coax quality)*
• Full HD resolution over coax (HD-TVI)
• Supports up to Full HD 1080p @ 30fps
• True WDR operation
• Superior low light performance -
• Amplify existing light with no distance limitation
• Presets: Outdoor, Low Light, Hallway, Lobby, Elevator, Indoor
• Built- -in heater and anti fog glass reduces condensation
• 3-axis for wall and ceiling mounting
• Chameleon Cove : snaps on and can be painted to
match any décor!*
• Full OSD operation through on board control and UTC (up the coax) -
• Additional 960H analog output
• Signal distance up to 1600 feet*
• Vandal / tamper resistant
• IP67 compliant, weather resistant
• 12VDC & 24VAC dual voltage operation
• 5 year warranty
OSD MENU TREE
PRESET MODE
• OUTDOOR • INDOOR
• LOW LIGHT • LOBBY• HALLWAY • ELEVATOR
MAIN SETUP
EXPOSURE
• B/W • EXTERN
• • • LOW MIDDLE HIGH
• SHARPNESS • • GAMMA MIRROR • FLIP
DAY / NIGHT
COLOR
SPECO DNR
IMAGE
EXIT
• BRIGHTNESS • SHUTTER
BACKLIGHT
• HLC• BLC• WDR
• AUTO
• • AWB COLOR GAIN
• • ACE DEFOG
SYSTEM
• OUTPUT • FREQ. • IMAGE RANGE
• INTENSIFY • AGC
• COLOR
IRIS
MOTION
• FRAME RATE
• LANGUAGE• COLOR BAR • RESET
• CAM TITLE
• PRIVACY
FOCUS ADJ
• COLOR SPACE
• COM.
OSD Joystick
Video Test (CVBS)
Right
Up
Down
Left
OSD CONTROL
Enter
DIMENSIONS
Bottom View
Side View Optional Accessories
Unit : inch
White Cover
(Included)
Black Cover
(Optional)
INTCM1
(Pole/Corner Mount)
INTWM1
(Wall Mount)
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without
notice and without incurring any obligation. Rev. 231127
200 New Highway, Amityville, NY 11701
800 645- -5516 / www.specotech.com
OSD MENU Details
DAY / NIGHT : Adjust Day / Night options.
COLOR : Always Color mode, Default value for these cameras
B/W : Always B/W mode.
- -ANTI SAT. : Adjusts the Anti Saturation level (0~ )20
EXT : please do not use this mode for these cameras
AUTO : Day / Night is switching automatically by AGC level.
- -ANTI SAT. : Adjusts the Anti Saturation level (0~ )20
- AGC THRES : Adjusts AGC THRES (0~ )20
- AGC MARGIN : Adjusts AGC margin (0~ )20
- DELAY : Adjusts the changing delay time (LOW/MIDDLE/HIGH)
COLOR : Adjusts white balancing options.
AWB : it goes to optimized color level automatically.
COLOR GAIN : Sets the desired Color Gain value (0~ )20
SPECO DNR : Uses to reduce the background noise in a low luminance
environment with 2D + 3D filtering system.
BACKLIGHT : Adjusts backlight options.
WDR : WDR illuminates darker areas of an image while retaining the
same light level for brighter areas to even out the overall brightness
of images with high contrast between bright and dark area
- Adjusts the WDR Weight (LOW/MIDDLE/HIGH)
* CVBS out cannot adjust this function.
BLC : Produces a clearer image of an object darkened by strong backlighting.
- H-POS : Adjusts the horizontal position(0~20)
- V-POS : Adjusts the Vertical position(0~20)
- H-SIZE : Adjusts the horizontal block size (0~20)
- V-SIZE : Adjusts the vertical block size (0~20)
HLC : Uses to contain extremely bright areas such as from car headlight,
the light can be masked out much of the on-screen details.
IMAGE : Adjusts various image options.
SHARPNESS: Adjusts sharpness level. Increasing this value, the picture
outline becomes stronger and clear. (0~ )10
GAMMA : Sets the desired Gamma value. (0.45 ~ 0.75)
MIRROR : Change the video direction horizontally.
FLIP: Change the video direction perpendicularly.
ACE (D-WDR) : Uses a digital wide dynamic range to balance dark and over
saturated areas within the image.
DEFOG : Activated this mode when the video or the weather is foggy.
PRIVACY : Used to hide regions of the image.
MOTION : Adjust motion detection settings.
DET WINDOW
DET TONE
MDRECT FILL
SENSITIVITY : Sets the desired of “Motion” (0~20)
MOTION OSD
TEXT ALARM
SIGNAL OUT
SYSTEM : Adjusts various camera system options.
OUTPUT
MAIN OUTPUT ANALOG OUT0
ANALOG OUT0 TVI
Y GAIN
CB GAIN
CR GAIN
POSITION
BURST FREQ
BURST GAIN
B&W
UCC SELECT
720EX
FRAME RATE: 1080P 30 / 720P 60
FREQ 60Hz
COM.
IMAGE RANGE
COLOR SPACE
COLOR BAR : Manufacturer’s option
LANGUAGE : Sets the desired OSD language
CAM TITLE
RESET: Press with long to reset all settings to factory defaults.
IRIS : ‘ALC’ as a default value
EXPOSURE : adjusts exposure settings.
BRIGHTNESS : Adjusts image brightness. (0 )~ 20
SHUTTER : Outdoor / Indoor / Deblur
INTENSIFY : Sets the desired multiple of the digital exposure length.
AGC(Auto Gain Control): Adjusts the AGC level. (0~ )10
Intensifier® Series HD-TVI 1080p 2MP Dome Camera
Wall/Ceiling Mount, UTC, 2BNC out for TVI & CVBS, Dual voltage
HT7246T2 – 2.8~12mm auto iris lens, dark gray housing

Specyfikacje produktu

Marka: Speco Technologies
Kategoria: nieskategoryzowany
Model: HT7246T2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Speco Technologies HT7246T2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Speco Technologies

Speco Technologies

Speco Technologies HTi702TM Instrukcja

21 Września 2024
Speco Technologies

Speco Technologies SPC104 Instrukcja

21 Września 2024
Speco Technologies

Speco Technologies O8P32X Instrukcja

21 Września 2024
Speco Technologies

Speco Technologies H4FB2M Instrukcja

21 Września 2024
Speco Technologies

Speco Technologies H4FD2M Instrukcja

21 Września 2024
Speco Technologies

Speco Technologies HT7246T2 Instrukcja

21 Września 2024
Speco Technologies

Speco Technologies O2VLD8 Instrukcja

29 Maja 2024
Speco Technologies

Speco Technologies CVCJBBW Instrukcja

20 Maja 2024
Speco Technologies

Speco Technologies INTJBSW Instrukcja

18 Maja 2024
Speco Technologies

Speco Technologies VLD9M Instrukcja

8 Maja 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact Qualite QL-3560-LED Instrukcja

4 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact Forever Ready Cool FRC-24-LED Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact Varipole Drop Ceiling Adapter Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024