Instrukcja obsługi SoundTube MCA10004t

SoundTube odbiornik MCA10004t

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SoundTube MCA10004t (16 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
1
Please read this user manual in detail before use.
! !
Warning Warning
SoundTube ampli ers must be installed by a professional audio installer/contractor. For safety and for
optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.
Do not spec or install ampli er near support beam, ventilation duct or
other structure that may interfere with ampli er function or dispersion.
913.663.5600 | www.soundtube.com
MCA7004t/ MCA10004t © 2024 SoundTube Entertainment, Inc. All rights reserved. Rev9.19.24
Please consult the MCA7004t / MCA10004t Software Manual for instructions on how to use the STNet
MCA Control PC Software. Manual can be found on the Downloads page at www.soundtube.com or on
the MCA7004t or MCA10004t product webpages.
Lead. Or fol
low.
MCA7004t MCA10004t Install Instructions For:
MCA7004t, MCA10004t
DANTE ENABLED NETWORKING AMPLIFIER INSTALLATION MANUAL
2
913.663.5600 | www.soundtube.com
MCA7004t/MCA10004t © 2024 SoundTube Entertainment, Inc. All rights reserved. Rev1.10.24
CONTENT
1. Product Description 3 ............................................................
1.1. Applicable Scenarios ...................................................3
1.2. Product Features 3 .........................................................
2. Technical Parameters 4 .........................................................
3. Panel Layout 5 .......................................................................
3.1. Front Panel 5 ..................................................................
3.2. Rear Panel 5 ..................................................................
3.3. Display Panel ...............................................................6
3.3.1 Homepage .......................................................6
3.3.2. Amplier Settings Interface 7 .............................
3.3.3. Input Settings Interface 8 ...................................
3.3.4. Output Settings Interface 9 ..................................................
3.3.5. Channel Ganging Interface ............................10
3.3.6. Preset Settings Interface ...............................10
3.3.7. Network IP Settings Interface ........................ 11
3.3.8. Details Interface .............................................12
3.3.9. Device Connection ........................................ 13
4. Device Wiring Instructions ................................................ 14
4.1 Power Cable ..............................................................14
4.2 Wiring Notes .............................................................. 14
4.3 MATRIX Mode ........................................................... 14
4.4 BRIDGE Mode ...........................................................15
5. Mounting Instructions ....................................................... 15
6. Precautions .......................................................................16
MCA7004t MCA10004t
Install Instructions For:
MCA7004t, MCA10004t
3
913.663.5600 | www.soundtube.com
MCA7004t/MCA10004t © 2024 SoundTube Entertainment, Inc. All rights reserved. Rev1.10.24
1. Product Description
The SOUNDTUBE ENTERTAINMENT MCA7004t and MCA10004t multichannel ampliers are Dante enabled and allow
for xed resistance and xed voltage output modes. At 4 ohms, these ampliers offer 700W and 1000W per channel,
respectively. The 4.3” LCD touchscreen on the front panel allows for easy access to gain controls, input matrixing, and
output mode selection. The STNet MCA Control software (included) provides the user with
complete control over the amplier. This software enables the user to monitor the real-time status of the amplier and
set up various DSP functions in real time. These DSP features include functions such as compressor, limiter, noise gate,
parametric equalization, matrix router, delay, and more!
1.1. Applicable Scenarios
• Performing arts centers • Theatres • House of Worship
• Gymnasiums • Hotels • Sports Venues
• Convention Centers • Shopping Malls • Night Clubs
• Retail Stores • Restaurants
1.2. Product Features
1. Standard 19-inch chassis design with a height of 2U.
2. The high-efciency switching power supply, coupled with PFC, and class D digital amplier technology deliver
extremely low output distortion and high efciency.
3. The high-end DSP allows for built-in functions such as compressor, limiter, FIR processor, noise gate, parametric
equalizer, matrix router, delay, high and low pass ltering, and other DSP functions.
4. The amplier supports matrixed and bridged output modes. Matrix mode allows for four independent output
channels, while bridged mode will combine two of the four channels and allow for 100V xed voltage output or high
wattage 8 ohm and 16 ohm outputs.
5. Fixed voltage and xed resistance modes: 4Ω, 8Ω, 16Ω, 70V, 100V,
6. The front panel offers a 4.3-inch IPS display supporting capacitive touch control. Through the front panel display,
the user can monitor items such as mains voltage and current, amplier status, amplier temperature, output mode,
amplier real-time voltage, current, and power, channel volume, and speaker impedance.
7. The amplier supports TCP/IP and allows for remote connection to the amplier using the STNet MCA Control
software.
8. Adjustable Input Sensitivity Options: 2dBu/6dBu/12dBu, set through PC software or LCD screen.
9. Supported Input Sources: Analog, AES3 digital audio, and Dante network. AES3 and Dante inputs will be ducked
for an analog input on the same channel. Only channels A and C support AES3 digital audio input.
10. The amplier will automatically calculate the connected speaker’s impedance and display the impedance on the
front panel display and STNet MCA Control.
11. The amplier will enter standby when there is no input for 30 minutes. The amplier will exit standby if input is
applied, the power button is held, or the amplier is commanded through the MCA STNet Control software. The
amplier supports entering and exiting standby remotely through the MCA STNet Control software. “Wake” time
is approximately 5 seconds.
12. The amplier’s network TCP/IP function can manage multiple devices and the network interface can be cascaded.
13. The RS485 port can be utilized to support external control.
14. Wide Voltage Operation: 110-240VAC.
MCA7004t MCA10004t
Install Instructions For:
MCA7004t, MCA10004t

Specyfikacje produktu

Marka: SoundTube
Kategoria: odbiornik
Model: MCA10004t

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SoundTube MCA10004t, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik SoundTube

SoundTube

SoundTube MCA10004t Instrukcja

31 Stycznia 2025
SoundTube

SoundTube STNet Switch Instrukcja

19 Grudnia 2024
SoundTube

SoundTube SA202 Instrukcja

19 Grudnia 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

ETON

ETON MA 1 Instrukcja

19 Marca 2025
Elipson

Elipson P1 Instrukcja

14 Marca 2025
Elipson

Elipson Stream S300 Xi Instrukcja

14 Marca 2025
Elipson

Elipson WIIM Mini Instrukcja

14 Marca 2025
KanexPro

KanexPro SP-1X16SL18G Instrukcja

13 Marca 2025
Marshall Electronics

Marshall Electronics VDA-108-3GS Instrukcja

13 Marca 2025
Rega

Rega Brio MK7 Instrukcja

12 Marca 2025
Rexing

Rexing RoadMate CPStream Instrukcja

12 Marca 2025
Mtx Audio

Mtx Audio Thunder TH2500.1 Instrukcja

11 Marca 2025
Mtx Audio

Mtx Audio Thunder TH1500.1 Instrukcja

11 Marca 2025