Instrukcja obsługi SoundBot SB240

SoundBot zestaw słuchawkowy SB240

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SoundBot SB240 (1 stron) w kategorii zestaw słuchawkowy. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/1
1. Charge headset for at least 2 hours.
(via USB)
LED will light up when charging.
LED will be off once fully charged.
Be sure headset is powered off before
going to next step.
2. Pairing your SB240 via Bluetooth.
In power off mode, press and hold the
multifunction key for 7 seconds until LED
flashes quickly between red and blue.
Pair with your device per your device
requirements. If prompted for a PIN, enter:
“0000.”
3. Confirm successful pairing.
Your device will show that SB240 is “paired.”
If pairing is unsuccessful:
1. If LED is still flashing red and blue, try searching on
your device again.
2. If this is still unsuccessful, power down by pressing
and holding down multifunction button for 3 seconds
(LED will be red for 3 seconds) and begin from step.
4. Enjoy General Use and Notices
Please read the following information before using this product.
Users are not permitted to make changes or modify the product and the
accessories in any way.
1. DO NOT use the product while operating a motor vehicle.
2. To avoid electronic interference and/or compatible conflicts, TURN OFF
the product in any facilities where posted notices instruct you to do so.
For example: Aircraft, Military Base, Hospital or Health Care Facilities.
3. To avoid impairing your hearing in the long-term operation, keep the
headset volume in the moderate level.
4. Keep away of fire, water, and high voltage equipments
5. Follow the charging procedure described in this guide to charge the
product.
SB240 Quick Start Guide & User Manual
Charging the Battery
SB240 uses a rechargeable battery. A normal charging process takes about
2-3 hours. The red LED will turn on when charging and will turn off when
charging is finished.
When the battery is nearly used up, the red LED will flash every 30 second and
there will also be a prompt from the headset. Please charge the headset at
this time.
Please make sure the battery has been fully charged your first three uses
to ensure the battery’s best performance.
Always use correct AC Power Adapter to charge the headset. Using any
incorrect power supply device will cause damage and void the warranty.
Upon completion of charging, please pull out the cable from the headset.
Do not put the headset in charging state past it being fully charged.
This will shorten the lifetime of the battery.
Do not use the headset in too hot or too cold environment. It is recommended
to keep the environment temperature between15 and 25 degree.
Dot not install, place or use the headset near any source of heat such as a
stove, radiator, oven, toaster, coffee maker or other apparatus (including
microwave oven) that gives off heat.
Warranty and product info: http://www.SoundBot.com
All trade names are registered trademarks of respective manufacturers listed.
Bluetooth technology and trademark are registered property of Bluetooth SIG.
All rights reserved.
Model: SB240 Specifications
Latest Bluetooth V2.1 + EDR class 2
10 Meter Range
HSP 1.1 Profile (Headset Profile)
HSP 1.5 Profile (Heads-Free Profile)
Strong Bass & Crystal Clear Sound
Standby/Talk Time; 400hrs/20hrs
Input Power: 5V, 500mAh
Battery: Rechargeable Li-Polymer Mini USB
Environment: Operating Temp.: -10C - +55C
Storage Temp.: -20C ~ 80C
(dependant upon distance/range from device)
LED Indicator
Volume Down/-
Volume Up/+
Forward/Next Track
Back/Previous Track
Multifunction button:
Single Click: Answer Incoming Call
Single Click While Streaming Musics: Play/Pause
Press & Hold 2 seconds: Redial Last Call
Press & Hold 2 seconds to Reject the Incoming Call
Micro USB
Microphone

Specyfikacje produktu

Marka: SoundBot
Kategoria: zestaw słuchawkowy
Model: SB240

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SoundBot SB240, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje zestaw słuchawkowy SoundBot

SoundBot

SoundBot SB240 Instrukcja

27 Września 2024
SoundBot

SoundBot SB540 Instrukcja

27 Września 2024

Instrukcje zestaw słuchawkowy

Najnowsze instrukcje dla zestaw słuchawkowy

Corsair

Corsair Virtuoso RGB Wireless XT Instrukcja

13 Października 2024
Philips

Philips TAT3509 Instrukcja

9 Października 2024
Krom

Krom Kopa 7.1 Instrukcja

9 Października 2024
OTL Technologies

OTL Technologies HK0856 Instrukcja

9 Października 2024
Midland

Midland BTR1 Advanced Instrukcja

9 Października 2024
Krom

Krom Kopa Move Instrukcja

9 Października 2024
Vorago

Vorago HSB-500 Instrukcja

9 Października 2024
Krom

Krom Kopa Instrukcja

9 Października 2024
Greenmouse

Greenmouse EP-TWS10 Instrukcja

9 Października 2024
Sennheiser

Sennheiser ADAPT 260 Instrukcja

9 Października 2024