Instrukcja obsługi Sony UP-25MD

Sony drukarka UP-25MD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sony UP-25MD (32 stron) w kategorii drukarka. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/32
Color Video
Printer
Instructions for Use
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
UP-25MD
4-746-451-12(1)
2020-01
© 2010 Sony Corporation
2
Indications for Use/Intended Use
The Sony UP-25MD printer is a compact, medical grade
color printer that can accept analog signal input. It is
designed to be integrated into medical imaging systems
such as ultrasound, cardiac catheterization laboratory,
endoscopy camera processor and other compatible medical
imaging systems and produce hard copy prints of still
images captured by these systems for the patient record or
for referrals.
Notes
• Output images from this equipment cannot be used for
diagnostic use.
• This equipment is for medical professionals.
• This equipment is intended for use in medical
environments, such as clinics, examination rooms, and
operating rooms.
To reduce the risk of fire or electric shock, do not
expose this equipment to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.
No modification of this equipment is allowed.
WARNING
To avoid the risk of electric shock, this equipment
must only be connected to a supply mains with
protective earth.
WARNING
To disconnect the main power, unplug the power plug.
When installing the unit, incorporate a readily accessible
disconnect device in the fixed wiring, or connect the power
plug to an easily accessible socket-outlet near the unit.
Do not position the ME equipment where it is difficult to
unplug the power plug.
If a fault should occur during operation of the unit, operate
the disconnect device to switch the power supply off, or
disconnect the power plug.
For customers in the U.S.A.
Caution
Federal law (United States of America) restricts this device
to sale by or on the order of a licensed healthcare
practitioner.
WARNING
Symbols on the product
Consult the instructions for use
Follow the directions in the instructions for use
for parts of the unit on which this symbol
appears.
This symbol indicates the manufacturer, and
appears next to the manufacturer’s name and
address.
This symbol indicates the EU Importer, and
appears next to the EU Importer’s name and
address.
This symbol indicates the European
Community representative, and appears next to
the European Community representative’s
name and address.
This symbol indicates the medical device in the
European Community.
This symbol indicates the date of manufacture.
This symbol indicates the serial number.
This symbol indicates the version of the
accompanying document.
This symbol indicates the Unique Device
Identifier (UDI), and appears next to the bar
code representation of the Unique Device
Identification.
This symbol indicates the equipotential
terminal which brings the various parts of a
system to the same potential.
Storage and transport temperature
This symbol indicates the acceptable
temperature range for storage and transport
environments.
Storage and transport humidity
This symbol indicates the acceptable humidity
range for storage and transport environments.
Storage and transport pressure
This symbol indicates the acceptable
atmospheric pressure range for storage and
transport environments.
For accessories
This symbol indicates the batch code.
This symbol indicates “Do not reuse”.
3
For customers in the U.S.A.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his own expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
All interface cables used to connect peripherals must be
shielded in order to comply with the limits for a digital
device pursuant to Subpart B of part 15 of FCC Rules.
For customers in Canada
This unit has been certified according to Standard CAN/
CSA-C22.2 No.60601-1.
For customers in the U.S.A and Canada
When you use this product connected to 240 V single
phase, be sure to connect this product to a center tapped
circuit.
Important safeguards and notices for use
in the medical environments
1. All devices connected to the unit must be certified or
compliant according to IEC 60601-1, IEC 60950-1,
and IEC 60065 standards and other IEC/ISO standards
applicable to the devices.
2. Furthermore, the system as a whole must comply with
IEC 60601-1 standards. All peripheral devices
connected to the signal input/output sections of the unit
constitute the medical-use system, and therefore, the
user is responsible for ensuring that the system as a
whole complies with IEC 60601-1 standards. If in
doubt, consult qualified Sony service personnel.
3. Connecting the unit to other devices may increase the
leakage current.
4. For all peripheral devices connected to the unit that
operate on commercial power supplies and do not
comply with IEC 60601-1 standards, incorporate an
isolation transformer that complies with IEC 60601-1
standards and connect to the commercial power supply
via the transformer.
5. The unit generates, uses, and may radiate radio
frequency energy. If it is not installed and used in
accordance with the instruction manual, it may cause
interference on other devices. If the unit causes
interference (which can be determined by
disconnecting the power cord from the unit), try the
following.
– Relocate the unit with respect to the affected devices.
– Connect the unit and the affected devices to different
branch circuits.
For more information, consult qualified Sony service
personnel.
(Applicable standard: IEC 60601-1-2)

Specyfikacje produktu

Marka: Sony
Kategoria: drukarka
Model: UP-25MD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sony UP-25MD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje drukarka Sony

Sony

Sony UP-970AD Instrukcja

4 Października 2024
Sony

Sony UP-990AD Instrukcja

4 Października 2024
Sony

Sony DPP-FP67 Instrukcja

3 Lipca 2024
Sony

Sony UP-D25MD Instrukcja

29 Maja 2024
Sony

Sony UP-D898DC Instrukcja

29 Maja 2024
Sony

Sony UP-25MD Instrukcja

29 Maja 2024
Sony

Sony UP-971AD Instrukcja

29 Maja 2024

Instrukcje drukarka

Najnowsze instrukcje dla drukarka

AVM

AVM Inspiration AS 2.3 Instrukcja

9 Grudnia 2024
AVM

AVM Ovation CS 6.3 Instrukcja

9 Grudnia 2024
HP

HP Jet Fusion 3D 3200 Instrukcja

6 Grudnia 2024
HP

HP LaserJet M681 MFP Instrukcja

6 Grudnia 2024
HP

HP Deskjet Ink Advantage 2520hc Instrukcja

6 Grudnia 2024
Kyocera

Kyocera ECOSYS P2135dn Instrukcja

15 Października 2024
Epson

Epson WorkForce Pro WF-C529R Instrukcja

15 Października 2024
OKI

OKI C920WT Instrukcja

15 Października 2024
Brother

Brother DCP-J152W Instrukcja

15 Października 2024
Fujifilm

Fujifilm Instax mini Link 3 Instrukcja

15 Października 2024