Instrukcja obsługi Soler & Palau PIV

Soler & Palau nieskategoryzowany PIV

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Soler & Palau PIV (3 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

www.solerpalau.com

WHOLE HOUSE EXTRACT UNIT

PIV SERIES

Whole house extract unit VMC PIV

PIV unit takes the air from the attic, where temperature is always higher than external air, passes

air via a ﬁlter and supplies it into the dwelling via hallway below attic.

It has available a pre-heating battery for the new air, for cold seasons. If the attic temperature is

higher than 25ºC, the ventilation stops.

PIV BP model has an outside air intake. If attic temperature is higher than 25ºC, the unit directly

takes the air from outside to avoid reheating of the dwelling.

Ventilation unit that provides supply

ventilation in dwellings whose distribution

does not allow use of whole house

ventilation system.

The PIV unit draws air from the attic,

where temperature is always higher than

external air, passes air via a ﬁlter and

supplies it into the dwelling via hallway

below attic.

G4 ﬁlter is oversized (3 sides of the unit,

270º) to increase service life.

The unit includes 4 operating schemes

with DC and low consumption motor,

automatic regulation of airﬂows and

electric battery that allows constant

supply temperature.

Versions

• PIV: standard model

• PIV BP: model equipped with by-pass to

take air directly from outside.

Conﬁguration

• G4 ﬁlter

• Electric battery of 500 W.

• Fan with DC motor.

• Supply valve with Ø 200 mm.

• 1m of ﬂexible duct with Ø 200 mm .

• 1 ﬁxing kit (screw and silent-blocks).

INSTALLATION OPERATION SCHEME

ADVANTAGES

• Easy to mount, it does not require complex

construction.

• Filtering of the air supplied into the house.

• Self-regulation of temperatures according to

outdoor conditions.

www.solerpalau.com

WHOLE HOUSE EXTRACT UNIT

PIV SERIES

Whole house extract unit VMC PIV

G4 air ﬁlter A complete solution

In addition to the ventilation unit, the product also includes:

• 1 supply valve with Ø 200 mm.

• 1 m of ﬂexible duct Ø 200 mm.

• 1 ﬁxing kit (screw and silent-blocks).

Model Voltage

(V)

Motor Absorbed power

at free

discharge

(W)

Heating

battery

power

(W)

Maximum

airﬂow

(m3/h)

Sound pressure

level radied

at 3 m

(dB(A))

Protection/

Insulation

PIV 230 EC 9 500 210 28 IP20 / Clase II

PIV BP 230 EC 10 500 200 28 IP20 / Clase II

It is essential to check that the electrical characteristics (voltage, intensity. frequency, etc.) indicated in the motor plate are compatible with the installation.

TECHNICAL CHARACTERISTICS

Recommendations for correct operation

In case of asimetric dwelling it is advisable to mount a wall

centrifugal extract fan ECOAIR DESIGN ECOWATT to improve

the efﬁciency of the system.

In case of a very leak-tight dwelling or with any room with

speciﬁc moisture problems, it is advisable to mount above the

windows a inlet air of EC range or, in case of high noise level

from outside, of ECA range.

PERFORMANCE CURVE