Instrukcja obsługi Solartech Sunrise PV Modules

Solartech kontrola klimatu Sunrise PV Modules

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Solartech Sunrise PV Modules (11 stron) w kategorii kontrola klimatu. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/11
Sunrise
Solartech
Co.,
Ltd
Tel:86-519-83906510 Fax:86-519-83906508
Website:www.srsolartech.cn
ADD: No.65-22 Xinggang Road, ZhongLou Development Zone, Changzhou 213023 Jiangsu, P.R.China
1/11
Installation Guide of Sunrise Solartech PV Modules
Term 2013
Contents
Purpose of this guide
General
Safety precaution for installing a solar
Photovoltaic system
Product Identification
Mechanical Installation
Selecting the location
Selecting the proper support frame
Ground mount
Roof mount
Pole mount
General installation
Electrical Installation
Grid-connected electrical system
Grounding
General installation
Commission and Maintenance
Blocking diodes and bypass diodes
Testing, commissioning and troubleshooting
Maintenance
Disclaimer of Liability
Sunrise
Solartech
Co.,
Ltd
Tel:86-519-83906510 Fax:86-519-83906508
Website:www.srsolartech.cn
ADD: No.65-22 Xinggang Road, ZhongLou Development Zone, Changzhou 213023 Jiangsu, P.R.China
2/11
Purpose of this guide
This guide contains information regarding the installation and safe handling of Sunrise
Solartech Co., Ltd photovoltaic module (hereafter is referred to as “module”). Sunrise Solartech
Co., Ltd hereafter is referred to as “Sunrise”.
Installers must read and understand the guide before installation. Any questions, please contact
our sales department for further explanations. The installer should conform to all safety
precautions in the guide and local codes when installing a module.
Before installing a solar photovoltaic system, installers should become familiar with the
mechanical and electrical requirement for such a system. Keep this guide in a safe place for
future reference (care and maintenance) and in case of sale or disposal of the modules.
General
Installing solar photovoltaic systems may require specialized skills and knowledge. Installation
should be performed only by qualified persons.
Each module comes with a permanently attached junction. Sunrise can provide customers with
fitted cables for ease of installation if desired.
Installers should assume the risk of all injury that might occur during installation, including,
without limitation, the risk of electric shock.
One individual module may generate DC voltages greater than 30 volts when exposed to direct
sunlight. Contact with a DC voltage of 30V or more is potentially hazardous.
Do not disconnect under load.
Photovoltaic solar modules change light energy to direct-current electrical energy. They are
designed for outdoor use. Modules may be ground mounted, mounted on rooftops, vehicles or
boats. Proper design of support structures is responsibility of the system designers and installers.
Use of mounting holes is suggested in a following paragraph.
Do not attempt to disassemble the modules, and do not remove any attached nameplates or
components from the modules.
Sunrise
Solartech
Co.,
Ltd
Tel:86-519-83906510 Fax:86-519-83906508
Website:www.srsolartech.cn
ADD: No.65-22 Xinggang Road, ZhongLou Development Zone, Changzhou 213023 Jiangsu, P.R.China
3/11
Do not apply paint or adhesive to module top surface.
Do not use mirrors or other magnifiers to artificially concentrate sunlight on the modules. Do
not expose back sheet foils directly
to
sunlight.
When installing the system, abide with all local, regional and national statutory regulations.
Obtain a building permit where necessary.
Safety precaution for installing a solar photovoltaic system
Solar modules produce electrical energy when light shines on their front surface. The DC
voltage may exceed 30V. If modules are connected in series, the total voltage is equal to the sum
of the individual module voltages. If modules are connected in parallel, the total current is equal
to the sum of individual module currents.
Keep children well away from the system while transporting and installing mechanical and
electrical components.
Completely cover the module with an opaque material during installation to keep electricity
from being generated.
Do not wear metallic rings, watchbands, ear, nose, lip rings or other metallic devices while
installing or troubleshooting photovoltaic systems.
Use only insulated tools that are approved for working on electrical installations.
Abide with the safety regulations for all other components used in the system, including wiring
and cables, connectors, charging regulators, inverters, storage batteries and rechargeable
batteries, etc.
Use only equipment, connectors, wiring and support frames suitable for a solar electric system.
Always use the same type of module within a particular photovoltaic system.
The electrical characteristics are within ±10 percent of the indicated values of Isc, Voc, and

Specyfikacje produktu

Marka: Solartech
Kategoria: kontrola klimatu
Model: Sunrise PV Modules

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Solartech Sunrise PV Modules, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje kontrola klimatu Solartech

Solartech

Solartech Sunrise PV Modules Instrukcja

3 Lutego 2025

Instrukcje kontrola klimatu

Najnowsze instrukcje dla kontrola klimatu

Suntec Wellness

Suntec Wellness Dynamic 2.0 Instrukcja

1 Kwietnia 2025
Suntec Wellness

Suntec Wellness Dynamic 2.0 Plus Instrukcja

31 Marca 2025
Webasto

Webasto ThermoConnect Instrukcja

31 Marca 2025
Webasto

Webasto Thermo 90 ST Instrukcja

31 Marca 2025
Webasto

Webasto Thermo Pro 90 Instrukcja

31 Marca 2025
Webasto

Webasto Telestart T99 Instrukcja

31 Marca 2025
Brotje

Brotje HydroComfort SPZ 1000-35 Instrukcja

30 Marca 2025
Rittal

Rittal SK 3201.300 Instrukcja

12 Marca 2025
Brotje

Brotje HydroComfort SPZ 650-35 Instrukcja

11 Marca 2025
Viessmann

Viessmann Vitotrol 300 RF Instrukcja

10 Marca 2025