Instrukcja obsługi Snap Circuits Bric: Structures SC-BRIC1

Snap Circuits Budowa modelu Bric: Structures SC-BRIC1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Snap Circuits Bric: Structures SC-BRIC1 (60 stron) w kategorii Budowa modelu. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/60
Copyright © 2018 Elenco® Electronics, Inc. All rights reserved. No part of this book shall be reproduced by any means; electronic,
photocopying, or otherwise without written permission from the publisher. U.S. Patents 7,144,255; 3,37,27 77; Patents Pending
A G E S 8 t o
Three (3) “AA”
batteries required
INSTRU CTION MANU AL
title:
753235
rojects
-26
1.
Most circuit problems are due to incorrect assembly, always double-
check that your circuit exactly matches the drawing for it.
2. Be sure that parts with positive/negative markings are positioned
as per the drawing.
3. Be sure that all connections are securely snapped.
4. Try replacing the batteries.
Elenco® is not responsible for parts damaged due to
incorrect wiring.
Basic Troubleshooting
Note: If you suspect you have damaged parts, you can follow the
Advanced Troubleshooting procedure on page 7 to determine which
ones need replacing.
Basic Troubleshooting 1
Parts List 2
How to Use Snap Circuits® 3
About Your Snap Circuits® Parts 4
Introduction to Electricity 5
DOs and DON’Ts of Building Circuits 6
Advanced Troubleshooting 7
Project Listings 7
Schematics and Blue Prints 8
Projects 9-54
Other Snap Circuits® Products 55
WARNING: SHOCK HAZARD - Never connect Snap
Circuits® to the electrical outlets in your home in any
way!
Table of Contents
WARNING: Always check your wiring
before turning on a circuit. Never leave
a circuit unattended while the batteries
are installed. Never connect additional
batteries or any other power sources
to your circuits. Discard any cracked or
broken parts.
Adult Supervision:
Because children’s abilities vary so
much, even with age groups, adults
should exercise discretion as to which
experiments are suitable and safe (the
instructions should enable supervising
adults to establish the experiment’s
suitability for the child). Make sure
your child reads and follows all of
the relevant instructions and safety
procedures, and keeps them at hand
for reference.
This product is intended for use by
adults and children who have attained
sucient maturity to read and follow
directions and warnings.
Never modify your parts, as doing so
may disable important safety features
in them, and could put your child at risk
of injury.
• Use only 1.5V AA type, alkaline
batteries (not included).
•
• Insert batteries with correct
polarity.
•
• Non-rechargeable batteries
should not be recharged.
Rechargeable batteries should
only be charged under adult
supervision, and should not be
recharged while in the product.
•
• Do not connect batteries or
battery holders in parallel.
• Do not mix old and new batteries.
•
• Do not mix alkaline, standard
(carbon-zinc), or rechargeable
(nickel-cadmium) batteries.
•
• Remove batteries when they are
used up.
•
• Do not short circuit the battery
terminals.
•
• Never throw batteries in a re or
attempt to open its outer casing.
•
• Batteries are harmful if swallowed,
so keep away from small children.
Batteries:
!
WARNING: CHOKING HAZARD - Small parts. Not for
children under 3 years.
!
Conforms to all applicable U.S. government requirements and CAN
ICES-3 (B)/NMB-3 (B).
1
Qty. ID Name Symbol Part #
r 4 Brick 1x1, 3-Sided 6BR1X1S3
r 33 Brick 1x2 6BR1X2G
r 10 Brick 1x3 6BR1X3G
r 11 Brick 1x4 6BR1X4G
r 11 Brick 1x6 6BR1X6G
r 4 Brick 1x10 6BR1X10G
r 7 Brick 1x12 6BR1X12G
r 18 Brick 2x2 6BR2X2G
r 6 Brick 2x4 6BR2X4G
r 8 Brick 2x6 6BR2X6G
r 25 Bric2snap Adapter, 1x1 6BRA1X1
r 25 Bric2snap Adapter, 1x2 6BRA1X2
r 25 Bric2snap Adapter, 2x2 6BRA2X2
r 1 Baseplate 10” x 5” 6BRBP1
r 6 Plate 2x12 6BRP2X12DG
r 20 Plate 2x2 6BRP2X2G
Qty. ID Name Symbol Part #
r 1 Brick Remover Tool 6BRTOOL
r 3 3-Snap Wire 6SC03
r 2 3D Snap 6SC3DSNAP
r 1 Battery Holder - uses three (3)
1.5V type “AA” (not Included) 6SCB3
r 1 Color LED 6SCD8
r 1 Blue LED 6SCD9
r 1 Blink Red LED 6SCD11
r 1 Color2 LED 6SCD12
r 1 Fiber Optic Tree 6SCFT
r 1 Mounting Base 6SCFMB
r 2 Jumper Wire (Orange) 6SCJ3A
r 3 Jumper Wire (Blue) 6SCJ4
r 1 4.5V Lamp 6SCL4
r 1 Lined Lens LED Attachment 6SCLLENS
r 1 Slide Switch 6SCS1
r 1 Melody IC 6SCU32
Important: DO NOT RETURN TO RETAILER If any parts are missing or damaged, . Call toll-free (800) 533-2441 or e-mail us at: help@elenco.com.
Customer Service: 150 Carpenter Ave., Wheeling, IL 60090 U.S.A. ● You may order additional / replacement parts at www.elenco.com/replacement-parts
Parts List (Colors and styles may vary) Symbols and Numbers
3
B3
D11
D9
L4
U32
S1
D8
D12
2

Specyfikacje produktu

Marka: Snap Circuits
Kategoria: Budowa modelu
Model: Bric: Structures SC-BRIC1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Snap Circuits Bric: Structures SC-BRIC1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Budowa modelu Snap Circuits

Snap Circuits

Snap Circuits Bric: Structures SC-BRIC1 Instrukcja

10 Września 2024

Instrukcje Budowa modelu

Najnowsze instrukcje dla Budowa modelu

Revell

Revell U-Boot Type XXVIIB Instrukcja

14 Października 2024
Mega Bloks

Mega Bloks Despicable Me - Family Luau Party Instrukcja

9 Października 2024
Italeri

Italeri Scania R730 V8 Streamline ‘‘Silver Griffin’’ Instrukcja

8 Października 2024
Chicco

Chicco #DINOSAURS Instrukcja

8 Października 2024
Revell

Revell F-15C Eagle Instrukcja

8 Października 2024
ISDT

ISDT Q6 Nano Instrukcja

7 Października 2024
Reely

Reely V-Charge 200 Duo Instrukcja

7 Października 2024
Revell

Revell Mirage 2000D Instrukcja

7 Października 2024
Reely

Reely V-CHARGE ECO NIMH 1000 Instrukcja

5 Października 2024
Italeri

Italeri Audi Quattro Rally Instrukcja

5 Października 2024