Instrukcja obsługi SMK-Link VP6494

SMK-Link Karta sieciowa/adapter VP6494

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SMK-Link VP6494 (2 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
System Requirements
Hardware: 1 available USB port
Operating System: Windows 2000, XP or Vista
Package Contents
Nano Bluetooth class 2 dongle
Bluetooth software CD-ROM
User’s manual
Installing the Nano Bluetooth Dongle
Insert the included Bluetooth software
CD-ROM into your desktop or notebook
computer’s CD drive.
Insert the nano Bluetooth dongle into
an available USB port on your desktop or
notebook computer.
Follow the on-screen instructions for
software installation.
Operating Tips & Trouble Shooting
Some Windows-OS already support
Bluetooth protocols. You may choose to
install and use the included Bluetooth
software or the Windows Bluetooth
software if it’s already installed in your
computer.
After successfully installing the Bluetooth
software and adapter, you may connect
your Bluetooth-enabled computer to any
Bluetooth devices. During the pair-up
process (please consult your Bluetooth
device user’s manual for instructions) it
may ask for a passkey. Use “0000” (4 zeros)
if your Bluetooth device does not provide
a passkey. If it fails to accept this passkey
please consult with your Bluetooth device
•
•
•
•
•
•
•
•
manufacturer for instructions.
The Bluetooth class 2 dongle supports up
to 7 Bluetooth devices with a maximum
transmission range of up to 33 feet/10
meters. Always use your Bluetooth
devices within this range to avoid loss of
transmission.
The Interlink Nano Bluetooth Class 2 Dongle
is designed to be plug-in and leave-in
with the computer without the need to
be removed when traveling. Nevertheless
precaution should be used when storing
your Bluetooth computer in its carrying
case:
When the computer carrying case is
too small/tight, remove the dongle,
keep it in a pocket inside the carrying
case, and plug it in to the USB port
again when the computer is out of
the carrying case. You don’t need to
reinstall the Bluetooth software, nor do
you need to reconnect your Bluetooth
devices again as the connection
stays intact even when the dongle is
removed temporarily.
When carrying your Bluetooth
computer in a case, try to position the
side with Bluetooth dongle facing
up to avoid exerting pressure to the
dongle.
Product Specifications
Bluetooth v2.0 with EDR (Enhanced Data
Rate)
Class 2 supports up to 33 feet/10 meters
range
USB 2.0 physical interface
OS compatibility: Windows 2000, XP, Vista
Dimensions: 0.5” x 0.8” x 0.2”
Weight: 5.5g
BQB, FCC and CE certified
Warranty
SMK-LINK ELECTRONICS CORPORATION (SMK-LINK)
warrants to the original end-user purchaser of the
Product (“you”) that the Product, excluding batteries,
will be free from defects in materials or workmanship
under normal use and service for one-year from date of
purchase. Dated invoice or sales receipt is necessary to
accompany the Product returned for warranty service
consideration. Any Product repaired or replaced under
the terms of the warranty is covered for the remainder
of the original warranty period or ninety (90) days from
•
•
»
»
•
•
•
•
•
•
•
N A N O
BLUETOOTH
CLASS 2 DONGLE
Interlink Nano Bluetooth
Class 2 Dongle
VP6494 by SMK-Link
the date of service or return shipping, whichever is
longer. If the Product becomes defective in materials
or workmanship during the warranty period, SMK-LINK
will, at its option, either repair or replace it with a more
current or upgraded model if the originally purchased
model is not available. This warranty does not cover
products which have been subjected to misuse,
accident, physical damage, improper installation,
abnormal operation or handling, neglect, inundation
or fire, or when product regulatory label has been
removed, altered or rendered illegible; nor does it cover
accessory and consumable items. In no case shall
SMK-LINK be liable for any indirect special, incidental, or
consequential damages based upon breach of warranty,
breach of contract, negligence, strict tort or any other
legal theory. Such damages include, but are not limited
to, loss of profits, loss of savings or revenues, inability
to use the product or any associated equipment, cost
of capital, cost of any substitute equipment, facilities
or services, claims by third parties other than you,
and injury to property. SMK-LINK’s total liability for
damages for any cause related to, or arising out of, the
use or inability to use the product, shall not exceed the
original price paid for the product even if SMK-LINK
has been informed of such possibility. If your Product
requires warranty service, you must first contact SMK-
LINK Product Support to receive an RMA Number. The
contact information can be found on SMK-LINK website:
http://www.smklink.com/support/contactsupport.html.
This warranty does not affect your statutory right and
you may also have other rights which vary from state
to state. Unless modified in writing, signed by both you
and SMK-LINK, this warranty is understood to be the
complete and exclusive agreement between the parties,
superseding all prior agreements, oral or written, and all
other communications between the parties relating to
the subject matter of this warranty.
Product Support
For technical support please contact SMK-Link
Electronics Corporation at:
http://www.smklink.com/support
Regulatory Compliance
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any
interference received, including interference that
may cause undesired operation.
FCC Statement
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Consult the dealer or an experienced radio/
TV technician for help.
Notice: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment. Extension cables are not
recommended, if used, they must be shielded in
order to comply with the emission limits.
IC Certification
The term “IC” before the certification/registration
number only signifies that the Industry Canada
technical specifications were met.
Declaration of Conformity
Hereby, SMK-Link Electronics Corporation
declares that this product is in compliance with
the essential requirements and other relevant
provisions of Directive 1999/5/EC.
All trademarks and registered trademarks
mentioned in this document are the property of
their respective owners.
Features and specifications are subject to change
without notice.
© 2008 SMK-Link Electronics Corporation. Interlink
Electronics and the six dot logo are trademarks of
Interlink Electronics, Inc. and are used under license by
SMK-Link.
•
•
•

Specyfikacje produktu

Marka: SMK-Link
Kategoria: Karta sieciowa/adapter
Model: VP6494

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SMK-Link VP6494, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Karta sieciowa/adapter SMK-Link

SMK-Link

SMK-Link VP6494 Instrukcja

17 Grudnia 2024
SMK-Link

SMK-Link VP6493 Instrukcja

17 Grudnia 2024

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter

Aukey

Aukey PA-U32 Instrukcja

14 Grudnia 2024
Vigitron

Vigitron Vi3305 Instrukcja

10 Grudnia 2024
LevelOne

LevelOne FNC-0109TX Instrukcja

14 Października 2024
StarTech.com

StarTech.com ST1000SPEX2T Instrukcja

9 Października 2024
StarTech.com

StarTech.com ST1000SPEX2LT Instrukcja

9 Października 2024
StarTech.com

StarTech.com AF221CE-POE-INJECTOR Instrukcja

9 Października 2024
StarTech.com

StarTech.com USB3LINK Instrukcja

9 Października 2024
StarTech.com

StarTech.com PCMACLINK2 Instrukcja

9 Października 2024
StarTech.com

StarTech.com PEX1000SFP Instrukcja

9 Października 2024
StarTech.com

StarTech.com ST2GPEX Instrukcja

9 Października 2024