Instrukcja obsługi Simplecom NW812

Simplecom Karta sieciowa/adapter NW812

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Simplecom NW812 (2 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Features

• High performance WiFi 6 USB adapter for PC and Laptop

• AX1800 supports up to 574Mbps at 2.4GHz and 1201Mbps at 5GHz

• Supports MU-MIMO for ecient connection in high density environments

• Supports WPA3 to provide enhanced network security against attacks

• High gain antenna ensures strong and stable WiFi signal

• Excellent portability with foldable antenna

• Beamforming improves WiFi signal strength and range

• Backwards compatible with previous standard WiFi routers

• Ideal for HD streaming, online gaming and downloading

• Easy and automatic installation for Windows PC

• Support Windows 10 and above operating systems

Driver Installation (Windows)

Specications

• Model: NW812

• Interface: USB 3.2 Gen 1 (USB 3.0)

• WiFi Protocol: IEEE 802.11a/b/g, WiFi 4 (802.11n), WiFi 5 (802.11ac), WiFi

6 (802.11ax)

• WiFi Rate: up to 574Mbps (2.4GHz 802.11ax), 1201Mbps (5GHz

802.11ax), 867Mbps (5GHz 802.11ac)

• Antenna Type: foldable high gain antenna

• Wireless Security: WPA-PSK, WPA2-PSK, WPA, WPA2, WPA3

• Wireless Frequency: Dual band 2.4GHz & 5GHz

• Operating Temperature: 0 – 40°C

• Operating Humidity: 10% - 90% non-condensing

• System Requirements: Windows 10 and above

Quick Installation Guide

1. While plug this adapter to your computer rst time, the installation

program will be launched automatically from Virtual CD Drive if

AutoRun is enabled on your PC. Then click to nish driver "Install"

installation.

Note: Only Windows 10 and 11 are supported, you can also

check latest driver from our website www.simplecom.com.au,

search the model number , then open product page, NW812

driver les are located under DOWNLOAD tab on product page.

NW812

AX1800 Dual Band WiFi 6 USB Adapter

NW812

2. If AutoRun is disabled on your PC, or blocked by security software,

you can manually open the Virtual CD Drive to install driver. You'll see

there is a Virtual CD Drive under on Windows 10 or "Realtek" "This PC"

11, which contains the driver software for the adapter. You can launch

installation by double clicking "WiAutoInstallSetup.exe".

3. Virtual CD Drive will disappear after the driver is installed.

Note: This WiFi adapter supports Windows only, macOS and other

systems are not supported

3. Check the "Connect automatically" option and click the "Connect"

4. Enter the network security key (password), then click "Next"

1. Click the network icon in system tray

2. Select your Wi-Fi SSID you want to connect

Windows Device Manager

1 Year limited Warranty. Our goods come with guarantees that

cannot be excluded under the Australian Consumer Law. You are

entitled to a replacement or refund for a major failure and for

compensation for any other reasonably foreseeable loss or damage.

You are also entitled to have the goods repaired or replaced if the

goods fail to be of acceptable quality and the failure does not

amount to a major failure.

For our assistance with regards to warranty please email to

support@simplecom.com.au or create a support ticket at

http://www.simplecom.com.au

Warranty

trademark of Simplecom Australia Pty Ltd. All other trademarks are

property of their respective owner. Specications and external appearance

are subject to change without notice. Warranty and technical support

covering this product are only valid in the country or region of purchase.

Windows 10 Windows 11

1. To open Device Manager on Windows 10 or 11, in the search box on the

taskbar, type , then select from the menu."Device Manager"

2. Expand the section. On a successful install, you "Network adapters"

should see the following device in the list

3. Please note driver only can be installed from auto installation program,

the USB Wi-Fi adapter will not be recognized or listed with exclamation

and question marks under Device Manager before installing the driver.

Once you complete the steps, the PC will connect to the network

using the wireless connection.

Connect to WiFi

Specyfikacje produktu

Marka:	Simplecom
Kategoria:	Karta sieciowa/adapter
Model:	NW812

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Simplecom NW812, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Karta sieciowa/adapter Simplecom

Simplecom NW812 Instrukcja

22 Września 2024

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter

LevelOne FNC-0109TX Instrukcja

14 Października 2024

StarTech.com ST1000SPEX2T Instrukcja

9 Października 2024

StarTech.com ST1000SPEX2LT Instrukcja

9 Października 2024

StarTech.com AF221CE-POE-INJECTOR Instrukcja

9 Października 2024

StarTech.com USB3LINK Instrukcja

9 Października 2024

StarTech.com PCMACLINK2 Instrukcja

9 Października 2024

StarTech.com PEX1000SFP Instrukcja

9 Października 2024

StarTech.com ST2GPEX Instrukcja

9 Października 2024

StarTech.com USB56KEM2 Instrukcja

9 Października 2024

StarTech.com PUSBADAP Instrukcja

9 Października 2024