Instrukcja obsługi Sharp PN-ZCMS1

Sharp soundbar PN-ZCMS1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sharp PN-ZCMS1 (5 stron) w kategorii soundbar. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/5

- EN 1 -

OPERATION MANUAL

VIDEO-CONFERENCING SOUNDBAR PN-ZCMS1

IMPORTANT:

To aid reporting in case of loss or theft, please record the

product’s model and serial numbers in the space provided.

The numbers are located in the rear of the product.

Model No.:

Serial No.:

U.S.A. ONLY

Supplier’s Declaration of Conformity

SHARP VIDEO-CONFERENCING SOUNDBAR, PN-ZCMS1

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

Responsible Party:

SHARP ELECTRONICS CORPORATION

100 Paragon Drive, Montvale, NJ 07645

TEL: 1-800-BE-SHARP www.sharpusa.com

U.S.A. ONLY

(2)

Printed in China

- EN 6 - - EN 3 -

SAFETY PRECAUTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly

handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can

result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing,

operating and cleaning the product. To ensure your safety and prolong the service life of your product, please read the following

precautions carefully before using the product.

1. Read instructions — All operating instructions must be read and understood before the product is operated.

2. Keep this manual in a safe place — These safety and operating instructions must be kept in a safe place for future

reference.

3. Observe warnings — All warnings on the product and in the instructions must be observed closely.

4. Follow instructions — All operating instructions must be followed.

5. Cleaning — Unplug the power cord from the power outlet before cleaning the product. Use a dry cloth to clean the product.

Do not use liquid cleaners or aerosol cleaners. Do not use dirty cloths. Doing so may damage the product.

6. Attachments — Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result

in accidents.

7. Water and moisture — Do not use the product near water. Do not install the product in a place where water may splash onto

it. Be careful of equipment which drains water such as an air-conditioner.

8. Ventilation — The vents and other openings in the cabinet are designed for ventilation.

Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life

of the product. Do not place the product on a sofa, rug or other similar surface, since they can block ventilation openings.

Do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the

manufacturer’s instructions are followed.

9. Power cord protection — The power cords must be routed properly to prevent people from stepping on them or objects from

resting on them.

10. Overloading — Do not overload power outlets or extension cords. Overloading can cause fire or electric shock.

11. Entering of objects and liquids — Never insert an object into the product through vents or openings. High voltage flows in

the product, and inserting an object can cause electric shock and/or short internal parts.

For the same reason, do not spill water or liquid on the product.

12. Servicing — Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other

dangerous conditions. Request a qualified service person to perform servicing.

13. Repair — If any of the following conditions occurs, unplug the power cord from the power outlet, and request a qualified

service person to perform repairs.

a. When the power cord or plug is damaged.

b. When a liquid was spilled on the product or when objects have fallen into the product.

c. When the product has been exposed to rain or water.

d. When the product does not operate properly as described in the operating instructions.

Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls

not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified

technician.

e. When the product has been dropped or damaged.

f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product

needs servicing.

14. Replacement parts — In case the product needs replacement parts, make sure that the service person uses replacement

parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of

unauthorized parts can result in fire, electric shock and/or other danger.

15. Safety checks — Upon completion of service or repair work, request the service technician to perform safety checks to

ensure that the product is in proper operating condition.

16. Wall mounting — When mounting the product on a wall, be sure to install the product according to the method

recommended by the manufacturer.

17. Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating

products (including amplifiers).

18.

Coin batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment,

dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below:

• Use the specified batteries only.

• Install the batteries with due attention to the plus (+) and minus (-) sides of the batteries according to the instructions in the

compartment.

• Do not short the terminals.

• Do not throw into water or fire. Do not disassemble.

• Replace an exhausted battery with a new one promptly.

• If you will not use the remote control for a long time, remove the batteries.

• If leaked battery fluid gets on your skin or clothing, rinse immediately and thoroughly. If it gets into your eye, bathe your

eye well rather than rubbing and seek medical treatment immediately. Leaked battery fluid that gets into your eye or your

clothing may cause a skin irritation or damage your eye.

• Do not swallow battery. Chemical burn hazard.

• If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

• Keep the battery away from children.

• If the battery compartment does not close securely, stop using the product and keep it away from children.

Remote Control Unit

1. Mic button

Used to switch the mic to ON/OFF.

2. Auto framing button

Used to switch the auto framing function to ON/OFF.

: ON

: OFF

When ON, framing is performed automatically in accordance with the speaker.

3. Cursor button

Used to move the display range of the camera after zooming the camera.

4. OK button

Used to return the zoomed or moved state of the camera to the initial state.

5. Call button

Answer the communication.*

6. End Call button

Hang up communication.*

7. Volume button

Used to adjust the speaker volume.

8. Zoom button

Used to zoom-in or zoom-out the camera display.

9. Preset (1/2) button

• Used to change the display to the preset magnification rate or display position

during camera display. This button cannot be used if the auto framing function is

ON.

• To register the preset, adjust the camera display to the state that you want to

* Depending on the application used, the button may not function.

Preparing the remote control unit

1. Pull the cover off.

Operate the remote control unit while facing the front of this product.

2. Put in the lithium battery (CR2032) with their plus (+) and minus (-) sides oriented correctly.

3. Close the cover.

TIPS

• When the battery becomes exhausted, replace it with new (commercially available) battery.

• The supplied battery may become exhausted quickly depending on how it is stored.

Specyfikacje produktu

Marka:	Sharp
Kategoria:	soundbar
Model:	PN-ZCMS1
Kolor produktu:	Czarny
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	93 mm
Szerokość produktu:	462 mm
Głębokość produktu:	76 mm
W zestawie pilot zdalnego sterowania:	Tak
Technologia łączności:	Przewodowa
Bluetooth:	Nie
Moc wyjściowa (RMS):	8 W
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	10 - 90 %
Wi-Fi:	Nie
Przewody:	AC, USB
Kanały wyjścia audio:	- kan.
Baterie w zestawie:	Tak
Montaż naścienny / rzutowanie na sufit:	Tak
Waga panelu głośnikowego:	950 g
Moc panelu głośnikowego RMS:	8 W
Zużycie energii soundbaru:	36 W
Zestaw do montażu ściennego:	Tak