Instrukcja obsługi Sharp HT-SL50

Sharp soundbar HT-SL50

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sharp HT-SL50 (16 stron) w kategorii soundbar. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

Notes:

●This product is recommended for flat panel TV (LCD and plasma).

●For HDMI connection, this product only supports PCM (Pulse Code Modulation) signals.

●This product is controlled via HDMI CEC (Consumer Electronics Control) specification, therefore

for HDMI connection, your TV’s CEC must be enabled.

●For TV without HDMI CEC, headphone or RCA (variable output) analog connection is available.

●For TV without HDMI, headphone or RCA (variable output) connection is required.

Recommended Connection:

TV Type CEC FUNCTION CONNECTION CONNECTION METHOD

with HDMI

( ver1.4 with ARC) MUST BE ENABLED HDMI IN

(ARC) Page 10, Method 1

with HDMI MUST BE ENABLED HDMI IN Page 11, Method 2

HDMI TV without

CEC & ARC or non

HDMI TV

NONE

HEADPHONE OUT Page 12, Method 1

RCA

(VARIABLE OUT) Page 12, Method 2

OPERATION MANUAL

Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read

this manual carefully. It will guide you in operating your SHARP product.

TINSZA935AWZZ

Printed in Malaysia

11C R AS 1

MODEL

HT-SL50

SOUND BAR HOME THEATER SYSTEM

ENGLISH

HT-SL50 Sound Bar Home Theater system consisting of Sound Bar and Subwoofer.

E-1

Please confirm that only the following accessories are included.

NOTE

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception, which

can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by

one or more of the following measures:

●Reorient or relocate the receiving antenna.

●Increase the separation between the equipment and

receiver.

●Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

●Consult the dealer or an experienced radio/TV

technician for help.

RCA to headphone cable

(1pin - 2 pins) x 1

(QCNWGA064AWPZ)

Subwoofer Stand x 2

(GITAUA004AW01)

Audio cable x 1

(QCNWGA062AWPZ)

HDMI cable x 1

(QCNWGA065AWPZ)

Foot cushion x 4

(PCUSGA189AWZZ)

Wall Mount Angle x 2

(LANGKA225AW01)

Pattern Paper

(TCAUHA026AWZZ)

Speaker Wire

(QCNWHA043AW01)

Sound bar Stand x 2

(GITAUA012AWSA)

Sound bar Stand

Cushion x 2

(PCUSSA190AWZZ)

Accessories

Special Notes

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

Explanation of Graphical Symbols:

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

FOR YOUR RECORDS

For your assistance in reporting this unit in case of loss

or theft, please record below the model number and

serial number which are located on the rear of the unit.

Please retain this information.

Model number ........................................................

Serial number ........................................................

Date of purchase ........................................................

Place of purchase ........................................................

E-2

WARNING

FCC Regulations state that any unauthorized changes or

modifications to this equipment not expressly approved by

the manufacturer could void the user’s authority to operate

this equipment.

Special Notes

Electricity is used to perform many useful functions, but it

can also cause personal injuries and property damage if

improperly handled. This product has been engineered

and manufactured with the highest priority on safety.

However, improper use can result in electric shock and/or

fire. In order to prevent potential danger, please observe

the following instructions when installing, operating and

cleaning the product. To ensure your safety and prolong

the service life of this product, please read the following

precautions carefully before use.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

13) Unplug this apparatus during lightning storms or when

unused for long periods of time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

Special Notes (continued)

HDMI, the HDMI Logo, and High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other

countries.

ENERGY STAR

Program Information

Products that have earned

the ENERGY STAR

are

designed to protect the

environment through

superior energy efficiency.

ENERGY STAR® is a U.S g s. re i tered mark.

Important Safety Instructions

12) Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination

to avoid injury from tip-over.

Specyfikacje produktu

Marka:	Sharp
Kategoria:	soundbar
Model:	HT-SL50
Kolor produktu:	Czarny
Moc wyjściowa (RMS):	100 W
Kanały wyjścia audio:	2.1 kan.
Odbiornik dołączony:	Nie
Ilość portów HDMI:	2
Wejście liniowe:	Tak
Kompatybilność dokowania produktów Apple:	Nieobsługiwany
Radio FM:	Nie
Moc RMS głośnika niskotonowego:	50 W
Typ głośnika niskotonowego:	Subwoofer aktywny
Dołączony subwoofer:	Tak
Moc panelu głośnikowego RMS:	25 W
Wymiary subwoofera (SxGxW):	115 x 307 x 422 mm
Audio Return Channel (ARC):	Tak
Wymiary panelu głośnikowego (SxGxW):	801 x 50 x 26 mm