Instrukcja obsługi Seal Shield STWM042WE

Seal Shield mysz STWM042WE

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Seal Shield STWM042WE (6 stron) w kategorii mysz. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
Quick Installation Guide
and Limited Warranty
for the STM042W Wireless Scroll Mouse
Congratulations on taking the rst step towards a clean, safe and secure work environment. Computer
input devices such as keyboards and mice have been identied as a major source of cross contamination
infections. SEAL SHIELD™ keyboards and mice represent an unprecedented line of defense in infection
control. The SEAL SHIELD™ Medical Grade Washable Mouse is a uniquely designed, fully submersible,
washable mouse. Our exclusive SEAL SHIELD™ Patent Pending technology make SEAL SHIELD™ mice the
rst dishwasher-safe mice for the mass market. Because of the Patent Pending SEAL SHIELD™ technol-
ogy, the mouse is rugged and resistant to the following: blood, water, salt water, disinfectants, solvents,
humidity, abrasives, dust, dirt, corrosives, sand, shock, alcohol, bleach, acid and alkaline.*
SEAL SHIELD™ keyboards and mice are designed to facilitate your disinfectant procedures, regardless of
your infection control protocols. SEAL SHIELD™ technology allows your mouse to be regularly sterilized
with hospital strength disinfectant sprays or wipes, without ever being disconnected from your computer.
This product is also Silver Seal™ protected. It contains an antimicrobial, fungistatic agent which protects
the product and keeps it cleaner, greener and fresher by inhibiting the growth of microbial bacteria,
mold, mildew and fungi on the products surface. SILVER SEAL™ is a natural antimicrobial solution. It
is completely safe for people, animals and the environment. For more information please visit us on the
web at www.SealShield.com.
* SEAL SHIELD™ Washable Keyboards and Mice have been tested with the named elements, compounds and mixtures in various strength solutions. Sterilization should only be
performed with qualied disinfectant products. For more information, please visit us on the web at www.sealshield.com.
Installation Guide
© Copyright 2012, Seal Shield, LLC, All Rights Reserved
www.sealshield.com
Before You Begin
Plug in the USB charging station and fully charge the mouse. The LED light
on the charging station will turn from red to green when the mouse is fully
charged.
Note: The internal rechargeable battery in the mouse should last several days
between charges. The mouse should be returned to the charger every 2-3
days or when the LED light indicates that it needs to be charged, but should
not be charged daily as this is unnecessary and may degrade the battery life.
Install the Micro USB receiver (Figure B)
into a USB port on the computer or into
any of the USB ports on the charging
station and wait for the device to Plug
and Play. Your Seal Shield™ mouse is de-
signed to use the default drivers on your
computer, so no additional software is
necessary.
Figure A Figure B
Connect the charging base by
inserting the USB connection wire
to your computer (Figure A). This
connection provides power to the
base and connection for the 3-port
hub in the base.
Connecting the Mouse to Your Computer
Turning the Mouse ON and OFF
To turn the mouse ON, press the right button
(when viewed from the bottom) and hold until
the red light turns on. To turn the mouse OFF,
press and hold the button until the red light turns
o.
Pairing the Mouse with the Computer
If you have not already installed the Micro USB
receiver please see the section called “Connect-
ing the Mouse to your Computer above. In most
cases, the mouse will already be paired with the
supplied receiver. If the mouse is not paired, or if
you have replaced the receiver follow the steps
below:
1. Insert the Micro USB receiver
2. Immediately press and hold the left button on
the bottom of the mouse for 5 seconds (when viewed from the bottom)
3. The mouse and receiver should now be paired and operational
Recharging the Mouse
When the mouse needs to be recharged, a red LED light underneath the scroll
wheel will BLINK indicating that the mouse needs to be charged again.
Note: The internal rechargeable battery in the mouse should last several days
between charges. The mouse should be returned to the charger every 2-3
days or when the LED light indicates that it needs to be charged, but should
not be charged daily as this is unnecessary and may degrade the battery life.
Washing. See the recommended cleaning protocols on the next page.
IMPORTANT: The USB charging station and Micro USB
receiver are not washable nor waterproof.


Specyfikacje produktu

Marka: Seal Shield
Kategoria: mysz
Model: STWM042WE

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Seal Shield STWM042WE, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje mysz Seal Shield

Instrukcje mysz

Najnowsze instrukcje dla mysz

Hama

Hama Canosa Instrukcja

15 Października 2024
Razer

Razer Naga Hex Instrukcja

14 Października 2024
Razer

Razer Abyssus Elite Instrukcja

12 Października 2024
Targus

Targus PAWM10U-01 Instrukcja

10 Października 2024
Krom

Krom Klever Instrukcja

9 Października 2024
Vorago

Vorago MO-305-SLIM Instrukcja

9 Października 2024
Vorago

Vorago MO-415 Instrukcja

9 Października 2024