Instrukcja obsługi Scott LSX 10

Scott podstawa/stacja dokująca LSX 10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Scott LSX 10 (4 stron) w kategorii podstawa/stacja dokująca. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

MODEL NO.: LSX 10

WIRELESS LED LIGHT WITH SPEAKER

Instruction Manual

GB-1

PRECAUTIONS

Follow the instructions below to ensure the product is used safely and correctly.

PLACEMENT

. Do not use the unit in places which are extremely hot, cold, dusty, or humid.

. Do not restrict the airflow around the unit by placing it in a place with poor ventilation.

. Do not place the unit close to heat sources.

. Use the apparatus only in moderate climates.

. Do not expose the unit to rain or splash with water.

. Do not place objects filled with liquids, such as vases on the unit.

AC VOLTAGE

. Before use, check that the rated voltage of your unit matches your local voltage.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with an

arrowhead symbol within

a triangle is a warning

sign alerting the user to

the presence of

“dangerous voltage”

inside the unit.

ATTENTION: To reduce the

risk of electric shock, do not

remove the cover. There are no

user serviceable parts inside

the unit. Refer all servicing to

qualified personnel.

The exclamation mark

within a triangle is a

warning sign alerting the

user to the presence of

important instructions

accompanying the

product.

Congratulations on your purchase of this additional wireless light with loud

speaker that we hope will fully meet your requirements. It will allow you to

improve iDXS 10L / iXSW 50 system.

TABLE OF CONTENTS

PRECAUTIONS 1

TABLE OF CONTENTS 1

BOX CONTENTS 2

LOCATION OF CONTROLS 2

POWER SUPPLY AND INSTALLATION 2

BASIC OPERATION 2

MAINTENANCE 3

TROUBLESHOOTING GUIDE 3

TECHNICAL SPECIFICATIONS 3

GB-2

BOX CONTENTS

1. LED Light with speaker

2. Pin for pairing

3. Instruction manual

LOCATION OF CONTROLS

LED light with speaker

1. E27 screw

2. LED light

3. Pair button

4. Standby LED

5. Speaker

POWER SUPPLY AND INSTALLATION

LED light with speaker

Make sure the power source is switched off before installation.

Screw the LED light with speaker to an E27 socket with an AC 100-240V ~

50/60Hz power source.

Note: Do not use your external dimmer control that may cause the unit

malfunction. To dim the light, press the button repeatedly.

BASIC OPERATION

Note: This LED light with speaker must be used with the docking station -

SCOTT model no.: iDXS 10L or iXSW 50. Refer to the instruction manual of

the docking station for detail operation.

Standby/On mode

Device Standby On

LED light with

speaker

Standby LED:

LED light:

Off

PAIRING

Note: Make sure that the LED light with speaker is powered properly. Refer to the

manual of your iDXS 10 L or iXSW 50 system for more information about pairing.

Pairing is to ensure your LED light with speaker can receive RF transmission

correctly from the docking station.

1. If you want to pair this new light in an existing group (one station + 2 lights to

get stereo sound), you have to reset the pairing first: when the docking station

is in standby mode, use the piece (supplied) to press and hold the PAIR button

of the docking station for more than 10 seconds until the source LEDS at the

top of the docking station flash. The station then goes back to standby mode.

2. Press the PAIR buttons briefly at the bottom of the docking station first and

then the other devices within one minute. All the standby LEDs will blink rapidly

until the pairing is successful in about one minute and the source LEDS at the

top of the docking station will flash for few seconds.

3. For pairing the next group, repeat above step (2).

Specyfikacje produktu

Marka:	Scott
Kategoria:	podstawa/stacja dokująca
Model:	LSX 10
Kolor produktu:	Biały
Typ produktu:	Głośnik mono przenośny
Rodzaj zasilania:	Prąd przemienny
Wysokość produktu:	160 mm
Szerokość produktu:	180 mm
Głębokość produktu:	120 mm
Waga produktu:	580 g
Rekomendowane użycie:	Uniwersalne
Technologia łączności:	Przewodowy i Bezprzewodowy
Impedancja:	4 Ω
Ilość głośników:	1
Moc wyjściowa (RMS):	10 W
Zakres częstotliwości:	2.4 GHz
Kanały wyjścia audio:	1.0 kan.
Diody LED:	Tak
Wymiary produktu (SxGxW):	180 x 120 x 160 mm
Zasilanie:	100 - 240V AC
Konstrukcja produktu:	Moduł głośnikowy
Zasięg częstotliwości:	- Hz
Radio FM:	Nie
Ilość przetworników:	1
Częstotliwość adaptera AC:	50/60 Hz
Wbudowana ładowarka:	Nie
Wbudowana latarka:	Tak