Instrukcja obsługi Scott I-SX 50 BK

Scott Kołyska/stacja dokująca I-SX 50 BK

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Scott I-SX 50 BK (6 stron) w kategorii Kołyska/stacja dokująca. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/6

i-SX50

AUDIO SYSTEM WITH DOCKING

STATION FOR iPod

Instruction Manual

GB-1

PRECAUTIONS

Follow the advice below for safe and appropriate operations.

INSTALLATION

. Do not use the unit in places which are extremely hot, cold, dusty, or humid.

. Place the unit on a flat and even surface.

. Do not restrict the airflow of the unit by placing it in a place with poor airflow, by covering it

with a cloth, or by placing it on a carpet.

. Do not place naked flame sources such as lighted candles on the apparatus.

. Use the apparatus only in moderate climates (not in tropical climates).

. Do not expose the apparatus to dripping or splashing.

. Do not place objects filled with liquids, such as vases, on the apparatus.

SAFETY

. When connecting and disconnecting the AC power cord from the AC mains outlet, pull the plug

and not the cord itself. Pulling the cord may damage it and may be dangerous.

. The mains plug must remain readily operable.

. When you are not going to use the unit for a long period of time, disconnect the AC power cord

from the AC mains outlet.

AC VOLTAGE

. Before use, check that the rated voltage of your unit matches your local voltage.

CONDENSATION

. When there is condensation inside the unit, it may not function normally.

. Unplug the unit for 1 to 2 hours before turning the power back on, or gradually heat the room

up and dry the unit before use.

. Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation.

. Do not impede the ventilation by covering the ventilation openings with items such as

newspapers, tablecloths, curtains, etc.

BATTERIES

. Pay attention to the environmental aspects of battery disposal.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with an

arrowhead symbol within a

triangle is a warning sign

alerting the user to the

presence of “dangerous

voltage” inside the unit.

ATTENTION: To reduce the

risk of electric shock, do not

remove the cover. There are

no user serviceable parts

inside the unit. Refer all

servicing to qualified

personnel.

The exclamation mark

within a triangle is a warning

sign alerting the user to the

presence of important

instructions accompanying

the product.

. In case of malfunction due to electrostatic discharge, the apparatus has to be reset by

disconnecting it from mains supply.

GB-2

16 17 18 19 20 21 22 23 24 25

32 4 5 6 7 8 9 10 11 12

26 15

TABLE OF CONTENTS

PRECAUTIONS……………………………………………………………………………… 1

TABLE OF CONTENTS………………………………………………………….. ………… 2

BOX CONTENTS……..……………………………………………………………………… 2

LOCATION OF CONTROLS……………………………………………………... ………… 2

POWER SUPPLY…………………………………………………………………………… 4

BASIC OPERATION.…………………………………………………………….. ………… 5

RADIO OPERATION………………………………………………………………………… 6

USB DEVICE OPERATION……..……………………………………………….. ………… 7

PLAYING AN iPod AND CHARGING THE INTERNAL iPod BATTERY………….…… 8

AUX IN FUNCTION……………………………………………………………….. ………… 9

MAINTENANCE……………………………………………………………………………… 9

TROUBLESHOOTING GUIDE………………………………………………….. ………… 10

TECHNICAL SPECIFICATIONS…………………………………………………………… 10

BOX CONTENTS

1. Main unit 4. AUX IN cable

2. AC power cord 5. Instruction manual

3. Remote control with battery 6. Adapters for different iPod models (4x)

LOCATION OF CONTROLS

1. Handle

2. ON/STANDBY button

3. SOURCE/CLOCK button

4. BAND/ENTER button

5. PRESET buttons

6. PLAY/ PAUSE button

7. STOP button

8. LCD display

9. REPEAT button

10. MEMORY/MENU button

11. SURROUND button

12. XBASS (Bass boost) button

13. Infra-red remote sensor

14. Tweeter (high frequency sound output)

15. Speaker

16. FM antenna

17. USB port

18. Adjustable support for iPod

19. iPod protective cover

20. Battery compartment

21. iPod universal docking station and

connector

22. VIDEO OUT jack

23. AC ~ socket

24. AUX IN jack

25. Headphones jack

26. VOLUME +/- buttons

27.   TUNE/SKIP buttons

GB-3

1. Play

2. Pause

3. AUX IN mode

4. XBASS (Bass boost)

5. Surround sound (low, high)

6. USB mode

7. MP3 file

8. POP in EQ presets

9. STEREO mode in FM radio

10. JAZZ in EQ presets

11. CLASSIC in EQ presets

12. ROCK in EQ presets

13. FLAT in EQ presets

14. MHz: Unit of FM radio frequency

15. kHz: Unit of MW radio frequency

16. Digit and text display

17. Radio FM/ MW mode

18. Mute function

19. Repeat folder

20. Repeat

8910

1 2

Remote control

1. EQ (Equalizer)

2. XBASS (Bass boost)

3. ON/STANDBY

4. SOURCE/CLOCK

5. BAND/ENTER

6. MUTE

7. VOLUME +/-

8. TUNE/NEXT

9. STOP

10. PRESET/FOLDER

11. REPEAT

12. PLAY/ PAUSE

13. TUNE/PREVIOUS

14. MEMORY/MENU

15. SURROUND

16. PRESET/FOLDER

LCD display

1 2 3 4 5 6 8 9 10

131415161718

GB-4

POWER SUPPLY

Using AC power supply

Insert the AC power cord into the AC mains outlet with a 230V AC ~ 50Hz power source and the

other end to the AC ~ socket at the back of the unit.

Using batteries

1. Open the battery compartment.

2. Insert 6 x UM2/ “C” size batteries (not supplied) with the polarities (+/-) matching the

engraved markings in the battery compartment. Reversed batteries may damage the unit.

3. Close the battery compartment.

Note: When AC power is supplied, the battery power is cut off automatically.

When an AC power failure or interruption occurs and the unit does not have batteries

installed, the time and preset stations will be lost. It is recommended to install the batteries

as back up. When replacing batteries replacement, always connect the AC power supply to

avoid losing the time and preset stations.

Installing the remote control battery

1. Remove the battery compartment cover on the bottom of the remote control, by pressing the

tab to the right while removing the cover.

2. Insert a 3V lithium battery (CR2025 or equivalent) with the polarity (+) matching the

indication inside the battery compartment cover.

3. Replace the battery compartment cover.

Note: The remote control battery normally lasts for about one year, although it depends on how

often and for what operations the remote control is used.

If the remote control fails to work even when it is operated near the unit, replace the

battery.

Precautions when using batteries

1. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type.

2. Do not mix different types of batteries together (e.g. alkaline, rechargeable and

standard (carbon zinc)) or old batteries with fresh ones.

3. Exhausted batteries must be removed to prevent any battery leakage.

4. Dispose of batteries properly according to environmental regulations.

GB-5

BASIC OPERATION

ON/ Standby mode

After connecting the power supply (refer to “POWER

SUPPLY”), the unit goes to standby mode and the clock time

is displayed. Press the ON/STANDBY button to turn on the unit and press it again to go to

standby mode.

Setting the clock time

1. In standby mode, press the SOURCE/CLOCK button. The hour

digits will flash.

2. Press the  / buttons to set the hour.

3. Press the SOURCE/CLOCK button to confirm and the minute

digits will flash.

4. Press the  / buttons to set the minutes.

5. Press the SOURCE/CLOCK button again to confirm the time setting.

Selecting the source

When the unit is switched on, press the SOURCE/CLOCK button repeatedly to select one of

the following sources: iPod, USB, AUX or Radio.

VOLUME control

Press the VOLUME +/- buttons to adjust the volume level.

MUTE function

Press the MUTE button on the remote control to turn off the sound. The symbol “ ”is displayed.

Press it again or use the VOLUME +/- buttons to resume the sound.

XBASS function

Press the button to boost the bass effect. The symbol “ ” is displayed.

Surround sound

Press the SURROUND button repeatedly to select the surround sound effect: Low ,

High or off.

EQ function

Press the EQ button on the remote control repeatedly to select your desired music mode in the

following sequence:

FLAT ROCK POP JAZZ CLASSIC

Connecting headphones

Plug in headphones (not supplied) to the headphones jack at the side of the unit for private

listening. The speaker output will be shut off automatically.

Specyfikacje produktu

Marka:	Scott
Kategoria:	Kołyska/stacja dokująca
Model:	I-SX 50 BK

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Scott I-SX 50 BK, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Kołyska/stacja dokująca Scott

Scott I-SX 50 BK Instrukcja

17 Sierpnia 2024

Scott i-CX 6 Pearl Instrukcja

16 Sierpnia 2024

Instrukcje Kołyska/stacja dokująca

Najnowsze instrukcje dla Kołyska/stacja dokująca

Vorago KSP-600 Instrukcja

9 Października 2024

Gembird DD-U3M2 Instrukcja

9 Października 2024

Urban Factory HCS02UF Instrukcja

9 Października 2024

Urban Factory HCS01UF Instrukcja

9 Października 2024

Urban Factory HCS04UF Instrukcja

9 Października 2024

Urban Factory HCS03UF Instrukcja

9 Października 2024

Bose SoundLink Flex 2nd Gen Instrukcja

9 Października 2024

StarTech.com UNIDOCK3UEU Instrukcja

9 Października 2024

StarTech.com SATDOCKU2EGB Instrukcja

9 Października 2024

StarTech.com SATDOCKU3FGB Instrukcja

9 Października 2024