Instrukcja obsługi Schwaiger LWH14225 513


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Schwaiger LWH14225 513 (4 stron) w kategorii wspornik ścienny. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
LWH 14225
Inhalt /
content
2
WARNUNG!
Der Installateur muss sich vergewissern, dass der Untergrund das Gerät und alle daran befestigten
Teile und Komponenten sicher tragen kann.
WARNING!
Installers must verify that the supporting surface will safely support of the equipment and all at-
tached hardware and components.
1. Montage der Wandplatte
Wall plate installation
1.1. Einbau in Ständerwände
Stud wall installation
1.2. Mauerwerk/Betonwand
Masonry/Conctrete wall
Markieren Sie die Befestigungslöcher an der Wand. WICHTIG: Die Bohrtiefe in der Wand muss mindestens
55 mm betragen. Bohren Sie die Löcher an den Markierungen. Schrauben Sie den Wandhalter fest.
Mark the mounting holes on the wall. Drill IMPORTANT: Holes depth in the wall must be 55 mm minimum.
the holes at the markings. Screw the wall bracket in place.
Markieren Sie die Befestigungslöcher an der Wand. WICHTIG: Die Bohrtiefe in der Wand muss mindestens
60 mm betragen. Bohren Sie die Dübellöcher an den Markierungen. Stecken Sie die Dübel in die Bohrlöcher und
schrauben Sie den Wandhalter fest.
Mark the mounting holes on the wall. Drill IMPORTANT: Holes depth in the wall must be 60 mm minimum.
the dowel holes at the markings. Insert the dowels into the drilled holes and screw the wall bracket in place.
3
HINWEIS! Wählen Sie je nach Art des Bildschirms geeignete Schrauben, Unterlegscheiben
und Abstandshalter (falls erforderlich).
- Bringen Sie die Adapterhalterungen so nah wie möglich an der Mitte des Fernsehers an.
- Schrauben Sie die Adapterhalterungen an das Fernsehgerät.
NOTE! Choose appropriate screws, washers and spacers (if necessary) according to the type of screen.
- Position the adapter brackets as close as possible to the center of the TV.
- Screw the adapter brackets onto the TV.
Ziehen Sie alle Schrauben
fest, aber nicht zu fest.
Thighten all screws but do
not over thighten.
Ziehen Sie die Schraube mit einem geeigneten
Schraubendreher fest, um die Halterung zu sichern.
Tighten the screw by using a proper screwdriver to
secure the bracket.
2. Installation der VESA Platte am TV
VESA panel installation to the TV
3. TV an die Wandplatte hängen
Hang TV on the wall plate
ODER
OR


Specyfikacje produktu

Marka: Schwaiger
Kategoria: wspornik ścienny
Model: LWH14225 513
Kolor produktu: Czarny
Materiał obudowy: Aluminium
Wysokość produktu: 240 mm
Szerokość produktu: 240 mm
Głębokość produktu: 76 mm
Waga produktu: 1100 g
Podręcznik użytkownika: Tak
Liczba obsługiwanych wyświetlaczy: 1
Interfejs do montażu panelu: 75 x 75,100 x 100,200 x 100,200 x 200 mm
Obracany: 25 - -25 °
Zakres kąta nachylenia: 7.5 - -7.5 °
Maksymalna waga: 25 kg
Typ mocowania: Ściana
Zestaw do montażu: Tak
Maksymalna wielkość ekranu: - "
Minimalny uchwyt VESA: 75 x 75 mm
Maksymalny uchwyt VESA: 200 x 200 mm

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Schwaiger LWH14225 513, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje wspornik ścienny Schwaiger

Instrukcje wspornik ścienny

Najnowsze instrukcje dla wspornik ścienny

Blaupunkt

Blaupunkt BP-WB210 Instrukcja

20 Października 2024
Sharp

Sharp AN-65AG2 Instrukcja

18 Października 2024
Vivanco

Vivanco WM 4725 Instrukcja

27 Września 2024
Vivanco

Vivanco MF3210 Instrukcja

27 Września 2024
Vivanco

Vivanco MF2210 Instrukcja

27 Września 2024
Vivanco

Vivanco MA2230 Instrukcja

27 Września 2024
Vivanco

Vivanco MA3230 Instrukcja

27 Września 2024
Vivanco

Vivanco WM3215 Instrukcja

27 Września 2024
VCM

VCM TDH 4 Instrukcja

26 Września 2024