Instrukcja obsługi Scansonic A200 Minimate

Scansonic System audio A200 Minimate

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Scansonic A200 Minimate (36 stron) w kategorii System audio. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/36

UK User Manual

DE Bedienungsanleitung

DK Brugervejledning

FR Guide d’instructions

IT Manuale di istruzioni

FI Käyttöohje

S Bruksanvisning

Introduction

Thank you for choosing A200, we hope our product

will bring you many years of enjoyment.

Please read this manual fully before unpacking

and installing the product.

Carton contents

During production and packing we have carefully

checked and inspected this amplier.

After unpacking please check for any damage

from transport. We recommend that you keep the

original cartonbox and packing material for any

future shipping.

In the cartonbox you will nd:

1 Input cable, RCA phono type, stereo

1 Input cable 3.5mm jack type, stereo

1 Mains cable

A200 installation

The amplier requires connection to the mains

power supply, so for your safety it is important that

you read this manual carefully.

A200 positioning

Place the amplier on a solid and plane surface,

avoid placement on carpets and other soft

surfaces.

Secure that there is plenty of ventilation around

the amplier, minimum 4” (100mm) free space

behind and above the amplier.

Do not cover the ventilation holes on the backside

of the amplier.

Connecting the A200

First switch off all equipment when connecting

your A200.

Connect the A200 line-in, optical or coaxial (2) with

your TV, smart phone, dockingstation, labtop etc.

Only connect one source.

Do not use use more than one input (line-in, optical

or coaxial) at the same time.

Connect the A200 SUBWOOFER LINE OUTPUT (4)

to a active subwoofer using a mono RCA phono

cable (optional).

Connect the A200 power cable (7) to the mains

voltage, and switch the POWER ON/OFF button (6)

to ON position.

Then turn the knob clockwise to turn on the A200.

For standby mode turn the knob counter clockwise

until you see the red ‘off’ text on the frontpanel of

your minimate.

The 5VDC CHARGE input (1) allow you to charge

your iPod, iPhone and other USB powered

products through the USB port – please note

that the port is only for charging, and not for

transmitting of data.

Connecting the A200 to you loudspeakers

First switch off the A200 on the POWER ON/OFF (6)

button on the rearpanel when connecting the A200

to your loudspeakers.

The binding posts on the output terminals

(5) accepts wire up to Ø 4mm or cables with

bananaplugs.

Make sure that positive terminal binding posts

on the A200 (marked + and coloured red) are

connected to the positive output terminal binding

posts on the loudspeaker and that the negative

terminals on the A200 (marked – and coloured

black) are connected to the negative output

terminal on the loudspeakers.

Operating the A200

The A200 is very easy to operate – after connection

of input source and loudspeakers switch on the

A200 on the POWER ON/OFF (6) button on the

rearpanel and turn the VOLUME knob on the front

panel clockwise to switch ON the amplier.

Adjust the volume by turning the VOLUME knob.

To switch OFF the A200 turn the VOLUME knob

counter clockwise.

Care and cleaning

We don’t recommend use of any solvents or

cleaners on A200 lacquered cabinets, the cabinet

surface usually only requires dusting or cleaning

with a soft cloth (do not use water).

Disconnect the unit from the mains supply if taken

out of use for a longer period.

Environmental information

The A200 comply with international directives

on the Restriction of Hazardous Substances

(RoHS) in electrical and electronic equipment and

the disposal of Waste Electrical and Electronic

Equipment (WEEE) - the crossed bin symbol

indicates compliance and that the products

must be appropriately recycled or processed in

accordance with these directives.

Owner’s manual

Troubleshooting

Basic troubleshooting

If the red ’off’ indicator lamp does not light up, check...

• thatthepowercordisrmlypluggedintothewalloutlet

• that the POWER switch on the rear panel is ON

• thatthemainsvoltageiscorrectandmatchingtheamplier

If no sound, check...

• that the Minimate™ is turned on (blue glow around knob)

• that the VOLUME control on the front panel is not all the way down

• thatthelinein,opticalorcoaxialinputcableisrmlypluggedin

• that the loudspeaker cables has been connected properly

If sound is distorted, check...

• that speaker cables are not contacting each other

• that volume is too high

• that input cables are not damaged

• that speakers are not damaged – try switch left and right speaker

Specyfikacje produktu

Marka:	Scansonic
Kategoria:	System audio
Model:	A200 Minimate

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Scansonic A200 Minimate, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje System audio Scansonic

Scansonic DA310 Instrukcja

25 Września 2024

Scansonic R2 FM radio Instrukcja

23 Września 2024

Scansonic i100 Instrukcja

16 Września 2024

Scansonic R3 BT Instrukcja

12 Września 2024

Scansonic BT 2.1 Stereo Transmitter Instrukcja

11 Września 2024

Scansonic IN300 Instrukcja

7 Września 2024

Scansonic A200 Minimate Instrukcja

3 Września 2024

Instrukcje System audio

Najnowsze instrukcje dla System audio

Lynx LT-Madi Instrukcja

5 Października 2024

Omnitronic BOB series Instrukcja

28 Września 2024

Tascam if-fw dm FIRE WIRE Instrukcja

28 Września 2024

Tascam 202MKVI Instrukcja

28 Września 2024

Proline cd1504usb Instrukcja

28 Września 2024

Monitor Vita Audio R4 Instrukcja

28 Września 2024

Lenco CR-2004 DAB Instrukcja

28 Września 2024

Boston Acoustics horizon trio Instrukcja

28 Września 2024

Sweex mm 111 Instrukcja

28 Września 2024

Telefunken BS 300 Instrukcja

28 Września 2024