Instrukcja obsługi Sanyo DP42841

Sanyo Telewizor plazmowy LCD DP42841

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sanyo DP42841 (44 stron) w kategorii Telewizor plazmowy LCD. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/44

2Need help? www.sanyoctv.com 1-800-877-5032

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding-type plug has two

blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided

plug does not fit fully into your outlet, consult an electri-

cian for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod,

bracket, or table specified by the manu-

facturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination

to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally,

or has been dropped.

15. If an outside antenna is connected to the television

equipment, be sure the antenna system is grounded so

as to provide some protection against voltage surges

and built up static charges. In the U.S. Selection 810-21

of the National Electrical Code provides information with

respect to proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an antenna

discharge unit, size of grounding conductors, location of

antenna discharge unit, connection to grounding elec-

trodes, and requirements for the grounding electrodes.

16. An outside antenna system should not be located in the

vicinity of overhead power lines or other electrical light

or power circuits, or where it can fall into such power

lines or circuits. When installing an outside antenna

system, extreme care should be taken to keep from

touching such power lines or circuits as contact with

them might be fatal.

EXAMPLE OF ANTENNA GROUNDING ACCORDING

TO NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

“Note to CATV system installer:

This reminder is provided to call the CATV system installer’s

attention to Article 820-40 of the NEC that provides guidelines for

proper grounding and, in particular, specifies that the cable

ground shall be connected to the grounding system of the build-

ing, as close to the point of cable entry as practical.”

17. Wall or Ceiling Mounting—The product should be

mounted to a wall or ceiling only as recommended by

the manufacturer.

18. Apparatus shall not be exposed to dripping or splashing

and no objects filled with liquids, such as vases, shall be

placed on the apparatus.

19. When the MAINS plug is used as the disconnect device,

the disconnect device shall remain readily operable.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN!

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SER-

VICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS

UNIT.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

Need help? www.sanyoctv.com 1-800-877-5032

PC RESOLUTION CHART

FCC INFORMATION __________

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment gen-

erates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If

this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is encour-

aged to try to correct the interference by one or more

of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit dif-

ferent from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV tech-

nician for help.

CAUTION: FCC Regulations state that improper modifi-

cations or unauthorized changes to this unit may void

the user’s authority to operate the unit.

As an Energy Star® Partner, Sanyo

Manufacturing Corporation has

determined that this product meets

the Energy Star® guidelines for energy

efficiency.

TRADEMARKS _______________

Manufactured under license from Dolby Laboratories.

“Dolby” is a trademark of Dolby Laboratories.

HDMI, the HDMI Logo and High-

Definition Multimedia Interface are

trademarks or registered trademarks of

HDMI Licensing LLC in the United

States and other countries.

This Class B digital apparatus complies with Canadian

ICES-003.

Manufactured under license from

Audyssey Laboratories. U.S. and

foreign patents pending. Audyssey

Dynamic VolumeTM is a trademark of

Audyssey Laboratories.

SPECIFICATIONS

Power Requirement: Source: AC 120V, 60Hz

AC Power Consumption: Weight:

DP42841 178 watts 33 lbs.

DP46841 178 watts 41 lbs.

Dimensions:

MODEL WIDTH HEIGHT DEPTH

DP42841 40.0 26.4 9.2

w/o stand 24.4 4.0

DP46841 43.9 29.4 10.6

w/o stand 26.6 4.6

NOTE: Dimensions are in inches

Specyfikacje produktu

Marka:	Sanyo
Kategoria:	Telewizor plazmowy LCD
Model:	DP42841

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sanyo DP42841, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Telewizor plazmowy LCD Sanyo

Sanyo DP32640 Instrukcja

28 Września 2024

Sanyo DP50741 Instrukcja

28 Września 2024

Sanyo DP42841 Instrukcja

27 Września 2024

Instrukcje Telewizor plazmowy LCD

Najnowsze instrukcje dla Telewizor plazmowy LCD

Viewsonic n 2060w Instrukcja

5 Października 2024

BenQ dv 3251 Instrukcja

5 Października 2024

Sansui SLED1953W Instrukcja

5 Października 2024

Yakumo 81 j Instrukcja

27 Września 2024

D.BOSS PDP 4219 Instrukcja

26 Września 2024

Magnavox 40MF401B Instrukcja

26 Września 2024

Fujitsu Siemens MYRICA VQ40-1 Instrukcja

26 Września 2024

Fujitsu Siemens MYRICA PQ50-1 Instrukcja

26 Września 2024

Metz linus 32 hdtv 100 Instrukcja

25 Września 2024

Tatung v26mmfj-et1 Instrukcja

25 Września 2024