Instrukcja obsługi Sanyo DP32640

Sanyo Telewizor plazmowy LCD DP32640

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sanyo DP32640 (16 stron) w kategorii Telewizor plazmowy LCD. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
© 2011 Sanyo Manufacturing Corporation
Table of Contents
Tabla de contenido
Table des matières
1JC6P1P0373- -1JC6P1P0373- -
Part No. / No. de parte / Nº de piece:
For assistance:
We’ll be glad to Help
Owner’s Manual
Manual del usuario
Manuel d’instructions
TVHD ACL
TVHD de LCD
HDTV LCD
N8LJ/US1Y
www.sanyoctv.com
1-800-877-5032
Model No. / No. de Modelo / Nº de modèle
DP32640
4
18
32
31.5
2Need help? www.sanyoctv.com 1-800-877-5032
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit fully into your outlet, consult an electri-
cian for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the manu-
facturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
15. If an outside antenna is connected to the television
equipment, be sure the antenna system is grounded so
as to provide some protection against voltage surges
and built up static charges. In the U.S. Selection 810-21
of the National Electrical Code provides information with
respect to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding elec-
trodes, and requirements for the grounding electrodes.
16. An outside antenna system should not be located in the
vicinity of overhead power lines or other electrical light
or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from
touching such power lines or circuits as contact with
them might be fatal.
EXAMPLE OF ANTENNA GROUNDING ACCORDING
TO NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
“Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the build-
ing, as close to the point of cable entry as practical.”
17. Wall or Ceiling Mounting—The product should be
mounted to a wall or ceiling only as recommended by
the manufacturer.
18. Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
19. When the MAINS plug is used as the disconnect device,
the disconnect device shall remain readily operable.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SER-
VICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS
UNIT.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS
PC RESOLUTION CHART
3
Need help? www.sanyoctv.com 1-800-877-5032
This Class B digital apparatus complies with Canadian
ICES-003.
FCC INFORMATION __________
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV tech-
nician for help.
CAUTION: FCC Regulations state that improper modifi-
cations or unauthorized changes to this unit may void
the user’s authority to operate the unit.
As an Energy Star® Partner, Sanyo
Manufacturing Corporation has
determined that this product meets
the Energy Star® guidelines for energy
efficiency.
ENERGY STAR
TRADEMARKS _______________
Manufactured under license from Dolby Laboratories.
“Dolby” is a trademark of Dolby Laboratories.
HDMI, the HDMI Logo and High-
Definition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC in the United
States and other countries.
This Class B digital apparatus complies with Canadian
ICES-003.
Manufactured under license from
Audyssey Laboratories. U.S. and
foreign patents pending. Audyssey
Dynamic VolumeTM is a trademark of
Audyssey Laboratories.
SPECIFICATIONS
Power Requirement: Source: AC 120V, 60Hz
AC Power Consumption: 122 watts
Weight: 21.8 lbs
Dimensions:
MODEL WIDTH HEIGHT DEPTH
DP32640 31.5 22.0 9.5
w/o stand 20.3 4.5
NOTE: Dimensions are in inches

Specyfikacje produktu

Marka: Sanyo
Kategoria: Telewizor plazmowy LCD
Model: DP32640

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sanyo DP32640, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Telewizor plazmowy LCD Sanyo

Sanyo

Sanyo DP32640 Instrukcja

28 Września 2024
Sanyo

Sanyo DP50741 Instrukcja

28 Września 2024
Sanyo

Sanyo DP42841 Instrukcja

27 Września 2024

Instrukcje Telewizor plazmowy LCD

Najnowsze instrukcje dla Telewizor plazmowy LCD

Viewsonic

Viewsonic n 2060w Instrukcja

5 Października 2024
BenQ

BenQ dv 3251 Instrukcja

5 Października 2024
Sansui

Sansui SLED1953W Instrukcja

5 Października 2024
Yakumo

Yakumo 81 j Instrukcja

27 Września 2024
D.BOSS

D.BOSS PDP 4219 Instrukcja

26 Września 2024
Magnavox

Magnavox 40MF401B Instrukcja

26 Września 2024
Fujitsu Siemens

Fujitsu Siemens MYRICA VQ40-1 Instrukcja

26 Września 2024
Fujitsu Siemens

Fujitsu Siemens MYRICA PQ50-1 Instrukcja

26 Września 2024
Metz

Metz linus 32 hdtv 100 Instrukcja

25 Września 2024
Tatung

Tatung v26mmfj-et1 Instrukcja

25 Września 2024