Instrukcja obsługi Sansui SLED1937

Sansui Telewizor plazmowy LCD SLED1937

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sansui SLED1937 (56 stron) w kategorii Telewizor plazmowy LCD. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/56
19” CLASS WIDE LED-LCD HDTV
LED-LCD HDTV GRAND ÉCRAN CATÉGORIE 19 PO
OWNER’S MANUAL
GUIDE D’UTILISATION
ATTENTION
ATTENTION
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the
required programming code.
Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur),
consultez la documentation accompagnant la télécommande universelle afin de connaître le code numérique cor-
respondant au téléviseur.
AIR/CABLE MODE SELECTION
SÉLECTION DU MODE AIR/CABLE
When shipped from the factory, the Signal Type option is set to the “Cable” (Cable Television) mode.
If not using Cable TV, set this menu option to the “Air” position.
Lorsque l’appareil sort de l’usine, l’option Signal Type est en mode « Cable » (câblodistribution). Si vous
n’utilisez pas la câblodistribution, sélectionnez l’option « Air ».
Before operating the unit, please read this manual thoroughly.
Avant de faire fonctionner l’appareil, veuillez lire le présent guide attentivement.
IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED
PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL.
SI VOUS DEVEZ COMMUNIQUER AVEC LE SERVICE CLIENTÈLE, PRENEZ NOTE
DU NUMÉRO DE MODÈLE AVANT D’APPELER.
CUSTOMER SERVICE – 1-800-289-0980
SERVICE/SERVICE CLIENTÈLE: 1-800-289-0980
ORION WEBSITE
SITE WEB ORION
FOR INFORMATION ON OUR OTHER PRODUCTS, TO ORDER ACCESSORIES ONLINE,
OR FOR RECYCLING
INFORMATION, PLEASE VISIT OUR WEBSITE AT
POUR OBTENIR DES INFORMATIONS SUR NOS AUTRES PRODUITS, POUR COMMANDER DES ACCESSOIRES,
OU LE RECYCLAGE, VEUILLEZ VISITER NOTRE SITE WEB:
www.sansuiproducts.com
SLED1937
SLED1937A
FRANÇAIS ENGLISH
3KX0121A_EnFr.indb 13KX0121A_EnFr.indb 1 1/13/12 9:27:20 AM1/13/12 9:27:20 AM
EN 2
ENGLISH
Location of the required marking
The rating sheet and the safety caution are
on the rear of the unit.
The lightning flash with arrowhead
symbol, within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product's enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the
FCC Rules could void the user's authority to operate this equipment.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY
FROM THIS PRODUCT AT TIMES.
CAUTION: TO PREVENT ELECTRIC SHOCK. DO NOT USE THIS POLARIZED PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE
FULLY INSERTED TO PREVENT BLADE EXPOSURE.
Record the model number and serial number.
Model number _______________ Serial number _______________
FCC Declaration of Conformity Compliance Statement
(Part 15):
The Sansui SLED1937 and SLED1937A, LED-LCD HDTV
complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
The party responsible for compliance to these rules is:
ORION AMERICA,INC.
1105 SOUTH MAIN STREET PRINCETON, INDIANA
47670,U.S.A
Ph: 1-800-289-0980
3KX0121A_EnFr.indb 23KX0121A_EnFr.indb 2 1/13/12 9:27:29 AM1/13/12 9:27:29 AM
3 EN
15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as
vases, should not be placed on the apparatus.
16) An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from touching such power lines or
circuits, as contact with them might be fatal.
17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
18) Do not push objects through any openings in this unit, as they may touch dangerous voltage points
or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into
the unit.
19) If an outside antenna or cable system
is connected to the unit, be sure the
antenna or cable system is grounded
to provide some protection against
voltage surges and built-up static
charges, Section 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in
wire to an antenna discharge unit, size
of grounding conductors, location of
antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ANTENNA LEAD IN WIRE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
GROUND
CLAMP
ELECTRIC SERVICE
EQUIPMENT
NEC-NATIONAL ELECTRICAL CODE
S2898A
EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
3KX0121A_EnFr.indb 33KX0121A_EnFr.indb 3 1/13/12 9:27:32 AM1/13/12 9:27:32 AM

Specyfikacje produktu

Marka: Sansui
Kategoria: Telewizor plazmowy LCD
Model: SLED1937

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sansui SLED1937, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Telewizor plazmowy LCD Sansui

Sansui

Sansui SLED1953W Instrukcja

5 Października 2024
Sansui

Sansui HDLCD1955 Instrukcja

24 Września 2024
Sansui

Sansui SLED2228 Instrukcja

23 Września 2024
Sansui

Sansui SLED1980 Instrukcja

23 Września 2024
Sansui

Sansui DTV1900 Instrukcja

23 Września 2024
Sansui

Sansui SLED1937 Instrukcja

17 Września 2024
Sansui

Sansui HDLCD3200 Instrukcja

2 Września 2024
Sansui

Sansui SLED2280 Instrukcja

30 Sierpnia 2024
Sansui

Sansui HDLCDVD320 Instrukcja

9 Sierpnia 2024

Instrukcje Telewizor plazmowy LCD

Najnowsze instrukcje dla Telewizor plazmowy LCD

Viewsonic

Viewsonic n 2060w Instrukcja

5 Października 2024
BenQ

BenQ dv 3251 Instrukcja

5 Października 2024
Sanyo

Sanyo DP32640 Instrukcja

28 Września 2024
Sanyo

Sanyo DP50741 Instrukcja

28 Września 2024
Sanyo

Sanyo DP42841 Instrukcja

27 Września 2024
Yakumo

Yakumo 81 j Instrukcja

27 Września 2024
D.BOSS

D.BOSS PDP 4219 Instrukcja

26 Września 2024
Magnavox

Magnavox 40MF401B Instrukcja

26 Września 2024
Fujitsu Siemens

Fujitsu Siemens MYRICA VQ40-1 Instrukcja

26 Września 2024
Fujitsu Siemens

Fujitsu Siemens MYRICA PQ50-1 Instrukcja

26 Września 2024