Instrukcja obsługi Sansui DTV1900

Sansui Telewizor plazmowy LCD DTV1900

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sansui DTV1900 (4 stron) w kategorii Telewizor plazmowy LCD. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

Wider Hole

and Blade

Polarized AC Cord Plug

(One blade is wider than the other)

AC outlet

Manufactured under license from Dolby Laboratories.

Printed in Thailand

OWNER

’

MANUAL

ENGLISH

CAUTION

Changes or modiﬁ cations not expressly approved by the party responsible for compliance with the FCC Rules could void

the user's authority to operate this equipment.

FEATURES

Integrated Digital Tuner -

You can view digital broadcasting without using a Digital TV Set-Top Box.

On-Screen 3 Language Display -

This TV can display the on screen language in English, Spanish or

French.

Picture Adjustments Using The Remote Control -

The On-Screen display allows precise remote

control adjustment of BRIGHTNESS, COLOR, CONTRAST, SHARPNESS and TINT.

Sleep Timer -

Operable from the remote control, this TV can be programmed up to 120 minutes to turn

off automatically.

Memory Back Up -

This system prevents loss of memorized channel selections in case a power

interruption to the TV should occur.

Closed Captioned Decoder -

Displays text captions or 1/2 of full screen text on the screen for hearing

impaired viewers.

V-Chip -

The V-Chip function can read the rating of a TV program or movie content if the

program is

encoded with this information. The V-Chip will allow you to set a restriction level.

If CONTACT WITH CUSTOMER SERVICE IS REQUIRED

PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL

CUSTOMER SERVICE– 1-800-289-0980

ORION WEBSITE

FOR INFORMATION ON OUR OTHER PRODUCTS,

PLEASE VISIT OUR WEBSITE AT

www.orionsalesinc.com

ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use

and conditions for a period of 12 month from date of original purchase in the United States.

Should service be necessary under this warranty for any reason due to a manufacturing defect or malfunction

during the ﬁ rst 12 month from date of original purchase, ORION will provide carry-in repair service by an ORION

authorized Independent Service Center at no charge.

Also, if an original part fails due to manufacturing defect in material

and workmanship within 1 year

from date of original purchase (2 years from date of original purchase for picture tube) we will

replace

the defective part provided the defect or malfunction is veriﬁ ed along with dated proof of purchase.

There are ORION authorized Independent Service Centers located throughout the country. For the one nearest

you, DIAL TOLL FREE: 1-800-289-0980 or visit our website at

www.orionsalesinc.com

. This product is eligible for CARRY-

IN service only. ORION will not be liable for damages incurred in shipment of the unit. If there are no ORION authorized

Independent Service Centers in your area please call – 1-888-296-7466 for assistance.

Note: This warranty is void if the product is:

(a) Damaged through negligence, misuse, abuse, or accident.

(b) Used in a commercial application or rentals.

(c)

Modiﬁ ed or repaired by anyone other than an Independent Service Center authorized by ORION

to effect warranty

repairs to the class of product or by the ORION Factory Service Center.

(d) Damaged because it is improperly connected to the equipment of other manufacturers.

This warranty does not cover:

(a) Damage to equipment not properly connected to the product.

(b) Costs incurred in the shipping of the product to an ORION authorized Independent Service Center or ORION

Factory Service Center.

instructions provided with the product.

(d) Ordinary adjustments to the product which can be performed by customer as outlined in the owner’s manual.

(e) Signal reception problems caused by external antenna or cable systems.

THIS WARRANTY IS NON TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER AND DOES NOT

EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED WARRANTIES, INCLUDING

THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD OF THE EXPRESS WARRANTY

AS PROVIDED HEREIN BEGINNING WITH THE DATE OF ORIGINAL PURCHASE AT RETAIL AND NO WARRANTIES,

WHETHER EXPRESS OR IMPLIED SHALL APPLY TO THIS PRODUCT THEREAFTER. ORION MAKES NO WARRANTY

AS TO THE FITNESS OF THE PRODUCT FOR ANY PARTICULAR PURPOSE AND USE.

UNDER NO CIRCUMSTANCES SHALL ORION BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE USE OF THIS

PRODUCT.

THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA. THIS WARRANTY GIVES YOU SPECIFIC

LEGAL RIGHTS, HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE. SOME

STATES DO NOT ALLOW LIMITATION ON IMPLIED WARRANTIES OR EXCLUSION OF CONSEQUENTIAL DAMAGE,

THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO YOU.

ORION SALES, INC.

3471 N. UNION DR.

OLNEY, ILLINOIS 62450

LIMITED WARRANTY

TV/CATV MODE SELECTION

When shipped from the factory, the TV/CATV menu option is set to the “CATV” (Cable Television) mode. If not using

CATV, set this menu option to “TV” mode.

ANTENNA/CATV CONNECTIONS

ATTENTION

If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the

required programming code.

VHF Antenna

Incoming CATV

Single 75 ohm cable

Combination VHF/UHF Antenna

300 ohm twin-lead wire

Splitter

Take off the Splitter

300-75 OHM MATCHING

TRANSFORMER

(not supplied)

Single 75 ohm cable

300 ohm twin-lead wire

UHF Antenna

COMBINER

(not supplied)

300-75 OHM MATCHING

TRANSFORMER

(not supplied)

A/B Switch

Splitter

Converter/descrambler

This television has an extended tuning

range and can tune most cable channels

without using a cable company supplied

converter box. Some cable companies

offer “premium pay channels” in which the

signal is scrambled. Descrambling these

signals for normal viewing requires the use

of a descrambler device which is generally

provided by the cable company.

Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

Connect the 75 ohm cable from a combination VHF/UHF antenna to the antenna jack.If your combination

antenna has a 300 ohm twin-lead wire, use the 300-75 ohm matching transformer (not supplied).

Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead)

Connect the UHF twin-lead wire to a combiner (not supplied). Connect the VHF twin-lead to the 300-75 ohm

matching transformer (not supplied). Attach the transformer to the combiner. Attach the combiner to the antenna jack.

Separate VHF/UHF Antenna

Connect the 75 ohm cable from the VHF antenna and the UHF antenna twin-lead to a combiner (not supplied).

Attach the combiner to the antenna jack.

NOTE:

If your VHF antenna has a twin-lead wire, use the 300-75 ohm matching transformer (not supplied),

then connect the transformer to the combiner.

For Subscribers to Basic Cable TV Service

For basic cable service not requiring a converter/descrambler box, connect the CATV 75 ohm coaxial cable

directly to the antenna jack on the back of the television.

For Subscribers to Scrambled Cable TV Service

If you subscribe to a cable service which requires the use of a converter/descrambler box, connect the incoming

cable to the converter/descrambler box and connect the output of the box to the antenna jack on the back of the

television. Follow the connections shown left. Set the television to the output of the converter/descrambler box

(usually channel 3 or 4) and use the converter/descrambler box to select channels.

For Subscribers to Unscrambled Basic Cable with Scrambled Premium Channels

If you subscribe to a cable service in which basic cable channels are unscrambled and premium channels require

the use of a converter/descrambler box, you may wish to use a two-set signal splitter (sometimes called a “two-set

coupler”) and an A/B switch box from the cable installer or an electronics supply store. Follow the connections

shown left. With the switch in the “B” position, you can directly tune any nonscrambled channels on your TV. With

the switch in the “A” position, tune your TV to the output of the converter/descrambler box (usually channel 3 or 4)

and use the box to tune scrambled channels.

TO USE AC POWER SOURCE

Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V

60Hz polarized AC outlet.

NOTES:

1. Never connect the AC line cord plug to other than

the speciﬁ ed voltage (120V 60Hz).

Use the attached power cord only.

2. If the polarized AC cord does not ﬁ t into a non-

polarized AC outlet, do not attempt to ﬁ le or cut the

blade. It is the user’s responsibility to have an

electrician replace the obsolete outlet.

3. If you cause a static discharge when touching the

unit, and the unit fails to function, simply unplug the

unit from the AC outlet, wait a few minutes, and

plug it back in. The unit should return to normal

operation.

POWER SOURCE

DTV1300

DTV1900

COLOR TELEVISION

J31G0201A SH 07/02

1. EARPHONE Jack -

Plug an earphone or monaural headphones with an 1/8" miniplug into this jack for

private listening.

2. Remote Sensor -

Signals from the Remote Control unit are received here.

3. Power Button -

Press to turn the TV on or off.

4. Volume

▲

▼

Buttons -

Press to raise or lower the level of the sound.

(Menu Buttons) -

Press both VOLUME

▲

▼

buttons at the same time to display the On-Screen menu

functions.

(Set + / – Buttons) -

Press to select the desired setting during On-Screen operations.

5. Channel

▲

▼

Buttons -

Press to select a higher or lower numbered channel set into memory.

(Enter Button) -

Press to enter or select information for On-Screen operations.

(Reset Button) -

Press, while in the On-Screen menu mode, to reset the On-Screen picture adjustments to

their factory preset positions.

6. Audio/Video In Jacks -

Audio and video signal cables from an external source can be connected here.

LOCATION OF CONTROLS

DTV1300

DTV1900

1. POWER Button -

Press to turn the TV on. Press

again to turn the TV off.

2. Direct Channel Selection Buttons (0-9) -

Allow

direct access to any channel.

3. –/DISPLAY Button -

When the TV is receiving an

3. –/DISPLAY Button - When the TV is receiving an 3. –/DISPLAY Button -

analog signal pressing this button will display the

current information on-screen. When the TV is

receiving a digital, pressing this button once will

display the digital information on-screen; pressing

it a second time will display the analog information

on-screen. To remove the display from the screen,

press this button again. This button is also the “–”

button used when selecting digital channels.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

The lightning ﬂ ash with arrowhead symbol, within an equilateral

triangle is intended to alert the user to the presence of

uninsulated dangerous voltage within the product’s enclosure

that may be of sufﬁ cient magnitude to constitute a risk of

electric shock.

The exclamation point within an equilateral triangle is intended

to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature

accompanying the appliance.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

REMOTE CONTROL

Before using the remote control transmitter, batteries must ﬁ rst be installed.

HOW TO INSTALL BATTERIES

1. Open the battery compartment cover.

2. Install two “AAA” (penlight size) batteries.

3. Replace the battery compartment cover.

Use two “AAA” size penlight batteries (supplied) or the

transmitter.The batteries may last approximately one year

depending on how much the remote control is used. For

best performance, it is recommended that batteries should

be replaced on a yearly basis, or when the remote operation

becomes erratic. Do not mix old and new batteries or

different types.

BATTERY PRECAUTIONS

These precautions should be followed when using batteries

in this device:

Use only the size and type of batteries speciﬁ ed.

2. Be sure to follow the correct polarity when installing

the batteries as indicated in the battery compartment.

Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together (e.g.

Alkaline and Carbon-zinc) or old batteries with fresh

ones.

4. If the device is not to be used for a long period of time,

remove the batteries to prevent damage or injury from

possible battery leakage.

5. Do not try to recharge batteries not intended

to be

recharged; they can overheat and rupture.

(Follow battery manufacturer’s directions.)

1. READ INSTRUCTIONS -

All the safety and operating

instructions should be read before the unit is operated.

2. RETAIN INSTRUCTIONS -

The safety and operating

instructions should be retained for future reference.

3. HEED WARNINGS-

All warnings on the unit and in

the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS -

All operating and use

instructions should be followed.

5. CLEANING -

Unplug this unit from the wall outlet

before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning the exterior

cabinet only.

6. ATTACHMENTS -

The manufacturer of this unit does

not make any recommendations for attachments, as

they may cause hazards.

7. WATER AND MOISTURE -

Do not use this

unit near

water. For example, near a bathtub,

washbowl, kitchen

sink, laundry tub, in a wet basement, or near a

swimming pool.

8. ACCESSORIES -

Do not place this unit on an unstable

cart, stand, tripod, bracket, or table. The unit may fall,

causing serious injury, and serious damage to the

unit.

8A.

An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.

9. VENTILATION -

Slots and openings in the cabinet

back or bottom are provided for ventilation, to ensure

reliable operation of the unit and to protect it from

overheating. These openings must not be blocked or

covered. The openings should never be blocked by

placing the unit on a bed, sofa, rug, or other similar

surface. This unit should never be placed near

or over

a radiator or heat source. This unit should not be

placed in a built-in installation, such as a bookcase,

or rack unless proper ventilation is provided or the

manufacturer's instructions have been adhered to.

10. POWER SOURCE -

This unit should be operated only

from the type of power source indicated on the rating

plate. If you are not sure of the type of power supply

to your home, consult your appliance dealer or local

power company. For units intended to operate from

battery power, or other sources, refer to the operating

instructions.

11. GROUNDING OR POLARIZATION -

This unit is

equipped with a polarized alternating current line plug

(a plug having one blade wider than the other). This

plug will ﬁ t into the power outlet only one way. This is

a safety feature. If you are unable to insert the plug

fully into the outlet, try reversing the plug. If the plug

still fails to ﬁ t, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose of

the polarized plug. If your unit is equipped with a

3-wire grounding-type plug, a plug having a third

(grounding) pin, this plug will only ﬁ t into a grounding-

type power outlet. This too, is a safety feature. If you

are unable to insert the plug into the outlet, contact

your electrician to replace your obsolete outlet. Do not

defeat the safety purpose of the grounding-type plug.

12. POWER-CORD PROTECTION -

Power-supply cords

should be routed so that they are not likely to be

walked on or pinched by items placed upon or against

them, paying particular attention to cords at plugs,

convenience receptacles, and the point where they

exit from the appliance.

13. LIGHTNING -

To protect your unit during a lightning

storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will

prevent damage to the unit due to lightning and power

line surges.

14. POWER LINES -

An outside antenna system shoul not

be located in the vicinity of overhead power lines, or

other electric light or power circuits, or where it can fall

into such power lines or circuits. When installing an

outside antenna system, extreme care should be taken

to keep from touching such power lines or circuits as

contact with them might be fatal.

IMPORTANT SAFEGUARDS

15. OVERLOADING -

Do not overload wall outlets and

extension cords as this can result in a risk of ﬁ re or

electric shock.

16. OBJECT AND LIQUID ENTRY -

Do not push objects

through any openings in this unit as they may touch

dangerous voltage points or short out parts that could

result in ﬁ re or electric shock. Never spill or spray any

type of liquid into the unit.

17. OUTDOOR ANTENNA GROUNDING -

If an outside

antenna or cable system is connected to the unit, be

sure the antenna or cable system is grounded to

provide some protection against voltage surges and

built-up static charges. Section 810 of the National

Electrical Code, ANSI/NFPA 70, provides information

with respect to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding

conductors, location of antenna discharge unit,

connection to grounding electrodes, and requirements

for the grounding electrode.

18. SERVICING -

Do not attempt to service this unit

yourself as opening or removing covers may expose

you to dangerous voltage or other hazards. Refer all

servicing to qualiﬁ ed service personnel.

19. DAMAGE REQUIRING SERVICE -

Unplug this unit

from the wall outlet and refer servicing to qualiﬁ ed

service personnel under the following conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen

into the unit.

c. If the unit has been exposed to rain or water.

d. If the unit does not operate normally by following

the operating instructions. Adjust only those

controls that are covered by the operating

instructions, as an improper adjustment of other

controls may result in damage and will often

require extensive work by a qualiﬁ ed technician to

restore the unit to its normal operation.

e. If the unit has been dropped or the cabinet has been

damaged.

f. When the unit exhibits a distinct change in

performance, this indicates a need for service.

20. REPLACEMENT PARTS -

When replacement parts

are required, be sure the service technician uses

replacement parts speciﬁ ed by the manufacturer or

those that have the same characteristics as the

original part. Unauthorized substitutions may result in

ﬁ re, electric shock or other hazards.

21. SAFETY CHECK -

Upon completion of any service or

repairs to this unit, ask the service technician to perform

safety checks to determine that the unit is in proper

operating condition.

22. HEAT -

The product should be situated away from

heat sources such as radiators, heat registers, stoves,

or other products (including ampliﬁ ers) that produce

heat.

23. NOTE TO CATV SYSTEM INSTALLER -

This reminder

is provided to call the CATV system installer’s attention

to Article 820-40 of the NEC that provides guidelines

for proper grounding and, in particular, speciﬁ es that

the cable ground shall be connected to the grounding

system of the building, as close to the point of cable

entry as practical.

PORTABLE CART WARNING

(symbol provided by RETAC)

S3126A

EXAMPLE OF ANTENNA GROUNDING AS

PER NATIONAL ELECTRICAL CODE

GROUND CLAMP

ELECTRIC

SERVICE

EQUIPMENT

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

ANTENNA LEAD IN WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

NEC-NATIONAL ELECTRICAL CODE

S2898A

4. SLEEP Button -

To set the TV to turn off after a

preset amount of time, press the SLEEP button.

The clock will count down 10 minutes each time

the button is pressed in the order of 120, 110,

100, ...... 20, 10, 0. After the sleep time is

programmed, the display will disappear then

reappear momentarily every ten minutes to

remind you the sleep timer function is operating.

To conﬁ rm the sleep time setting, press the

SLEEP button once and the remaining time will

be momentarily displayed. To cancel sleep time,

press the SLEEP button repeatedly until the

display turns to 0.

5. VOL (VOLUME) + / - Buttons -

Press the +

button to increase, or the - button to decrease the

volume level. Use to select the desired setting

during the menu screen operation.

6. MENU/ENTER Button -

Press to display the

menu screen function and to press to enter or

select information for On-Screen operations while

in the adjustment menu.

7. EXIT Button -

Press remove the menu screen.

8. TV/AV Button -

Press this button to display

SOURCE SELECTION menu to select the video

input source.

9. QUICK VIEW Button -

This button allows you to

go back to the previous channel selected by

pressing the QUICK VIEW button. Press this

button again to return to the channel you were

watching.

10. MUTE Button -

To turn off the sound, press this

button once. The TV will be silenced and the

symbol

“

MUTE

”

will appear on the screen. The

mute feature can be released by pressing the

MUTE button again or one of the VOL + or −

buttons.

11. CH (CHANNEL)

Buttons -

Press

button to change to a higher numbered channel

set into memory. Press

button to change to a

lower numbered channel set into memory.

Use to select the desired setting during the menu

screen operation.

12.

PICTURE SIZE Button -

Press this button to

change the picture size.

13.

AUDIO Button -

Press this button to display

AUDIO LANGUAGE menu in the digital mode.

14.

CLOSED CAPTION Button -

Press this button to

display CLOSED CAPTION menu.

15.

ANALOG/DIGITAL Button -

Press this button to

switch between analog and digital broadcasting.

This TV can display the channel number, on screen displays and picture adjustments on the screen in English,

Spanish or French.

On-screen language selection (step 3) will automatically appear on the screen when you press MENU/ENTER

initially. Select the language you prefer ﬁ rst, then proceed with the other menu options.

Press MENU/ENTER.

Press

to select the LANGUAGE mode, then press

Press

until the “

” indicator points to the desired language:

English (ENGLISH), Spanish (ESPAÑOL) or French (FRANÇAIS), then

press MENU/ENTER.

Press EXIT to return to normal screen.

NOTE:

If Spanish or French is chosen, the Closed Caption indicators will be in the selected language, but the Closed

Caption text will not be affected by the language selection.

SETTING LANGUAGE

Press

English (ENGLISH), Spanish (ESPAÑOL) or French (FRANÇAIS), then

Press

English (ENGLISH), Spanish (ESPAÑOL) or French (FRANÇAIS), then

Press EXIT to return to normal screen.

TV OPERATION

To turn on the TV, press POWER button.

The VOLUME can be adjusted to a desired level by pressing the VOL (VOLUME) − or + .

The sound level will be indicated on the TV screen by GREEN BARS AND A NUMBER. As the sound

level increases, so do the number of BARS AND THE NUMBER on the screen. The same is true for

decreasing the level.

Set the TV/CATV menu option to the appropriate position. When shipped from the factory, this menu

option is in the CATV setting. See “TO MEMORIZE CHANNELS”.

CH (CHANNEL)

and

Press and release CH (CHANNEL)

. The channel automatically stops at the next channel set

into memory. Press and hold the button down to change channels more quickly.

DIRECT CHANNEL SELECTION buttons (0-9)

Press these buttons to select a channel. The channel number will appear on the upper right corner of

the TV screen. If an invalid channel number is selected, the display will revert to the previous channel.

TV MODE DIRECT CHANNEL SELECTION

When the TV/CATV menu option is in the TV position, all channels can be instantly selected by using two

buttons (For example, to select channel 2, press “0”, then “2”. If you press only “2”, channel selection will

be delayed for a few seconds). For channels 10 and above, press the 2 digits in order.

ANALOG CHANNEL SELECTION

When the TV/CATV menu option is in the CATV position, channels can be selected as follows:

1-9

Press “0” twice, then 1-9 as needed.

Example, to select channel 2, press “002”.

10-12

Press “0”, then remaining 2 digits.

Example, to select channel 12, press “012”.

13-99

Press the 2 digits in order.

Example, to select channel 36, press “36”.

100-125

Press the 3 digits in order.

Example, to select channel 120, press “120”.

DIGITAL CHANNEL SELECTION

Press the ﬁ rst 3 digits, then press “–/DISPLAY”, followed by the remaining 3 digits.

Example, to select channel 015-001, press

015 – 001

• If a channel is selected with only audio content, “AUDIO ONLY” will be displayed on the screen.

• If a channel is selected with a weak digital signal, “DIGITAL CHANNEL SIGNAL STRENGTH IS LOW”

will be displayed on the screen.

•

If a channel is selected to which you have not subscribed, “DIGITAL CHANNEL IS SCRAMBLED” will

be displayed on the screen.

NOTE:

It may take a few seconds for a digital channel picture to appear on screen after being selected.

TV - VHF/UHF channels

CATV - CABLE TV channels

For proper operation, before selecting channels, they should be set into the TV’s memory.

See “TO MEMORIZE CHANNELS”.

This TV is ﬁ tted with a V-CHIP controller which provides you with channel viewing access controls and restrictions.

This function allows adult screening of TV programs based upon ratings.

Press MENU/ENTER.

Press

to select V-CHIP SET option, then press

Enter your password (4 digits) using the Direct channel selection buttons (0-9),

then press MENU/ENTER.

Enter the same password for conﬁ rmation, then press MENU/ENTER.

Press

to select V-CHIP SET, then press

Press

to select TV RATING, then press

to display

the desired rating

When you select TV-Y7, TV-PG, TV-14 or TV-MA, press DISPLAY to explain the rating.

Press

select the desired rating you want. Press

to select the setting ON or OFF.

Press

to select MOVIE RATING, then press

Press

to select a rating, then press

to select ON or OFF for each rating.

Press MENU/ENTER twice to return to the V-CHIP menu, then press

to select V-CHIP.

Press

to select “ON”. Your settings are now set into momory.

Press EXIT to return to the normal screen.

NOTES:

•

If you want to change the password, follow steps 1

3 and select the “CHANGE PASSWORD”

option then enter

your new password.

• The V-Chip function is activated only on programs and recordings that have the rating signal.

• Once you block a program using the V-Chip function, the blocked program cannot be watched based on the

content of the show. When the program starts, the “INPUT PASSWORD” will appear on the screen. When

you want to release the V-Chip temporarily, enter the password.

If you change the channel or turn off the TV while the V-Chip function was temporarily released, the original

setting will be resumed. If you return to the channel you were watching you must re-enter your password to

temporarily release your V-Chip function again.

• If you are changing channels using a VCR, DVD/VCD or a cable box, while the TV remains on channel 3 or

4, the V-Chip operates differently. When you enter your password to temporarily release the block on any

channel, you have completely disabled the V-Chip function for all stations. To reset the V-Chip turn your TV

off and back on.

• Some cable boxes are built with a delay feature, in some cases it can take up to 10 seconds for a program to

appear after the password has been input.

• It may take a few seconds for a digital channel picture to appear on screen after being selected.

• The V-CHIP SET (DTV) will only be selectable when the unit receives a digital broadcast using the new

rating system. It may take several minutes for the intial V-Chip Set-up to complete. At this time some stations

are still developing this signal, in those cases the V-CHIP SET (DTV) will not function.

Press

Enter your password (4 digits) using the Direct channel selection buttons (0-9),

then press MENU/ENTER.

Enter your password (4 digits) using the Direct channel selection buttons (0-9),

Enter the same password for conﬁ rmation, then press MENU/ENTER.

Press

Press MENU/ENTER twice to return to the V-CHIP menu, then press

Press EXIT to return to the normal screen.

Press MENU/ENTER in the digital mode.

Press

to select DIGITAL SETUP, then press

When DIGITAL SETUP menu appears, press

to select AUDIO LANGUAGE

and press

Press

or the number button (0-7) to select your desired language, then press MENU/ENTER.

Press MENU/ENTER to return to the normal screen.

NOTE:

You can also display the AUDIO LANGUAGE menu by pressing AUDIO on the remote control.

AUDIO LANGUAGE (DIGITAL MODE)

When DIGITAL SETUP menu appears, press

Press

Press MENU/ENTER in the digital mode.

Press

Press MENU/ENTER to return to the normal screen.

CC ADVANCED (DIGITAL MODE)

Closed Caption are factory preset however you can adjust them individually as follows:

Press MENU/ENTER in the digital mode.

Press

to select DIGITAL SETUP, then press

When DIGITAL SETUP menu appears, press

to select CC ADVANCED and press

Press

to select the item you want to adjust, then press

Press

to select desired setting, then press MENU/ENTER.

You can select from among the following items and parameters.

TEXT SIZE :

SMALL, STANDARD, LARGE

TEXT TYPE :

STYLE 1, STYLE 2

TEXT COLOR :

BLACK, WHITE, RED, GREEN, BLUE, YELLOW, MAGENTA, CYAN

TEXT EDGE :

NONE, RAISED, DEPRESSED, OUTLINE, LEFT SHADOW, RIGHT SHADOW

BACKGROUND COLOR

BLACK, WHITE, RED, GREEN, BLUE, YELLOW, MAGENTA, CYAN

Press MENU/ENTER until the menu screen is cleared.

NOTE:

Do not set the Closed Caption “TEXT COLOR” and “BACKGROUND COLOR” as the same color or you will not

be able to see the text.

Press MENU/ENTER in the digital mode.

Press

When DIGITAL SETUP menu appears, press

Press

You can select the display method of Closed Caption with AUTO designated by broadcasting studios or CUSTOM.

Press MENU/ENTER in the digital mode.

Press

to select DIGITAL SETUP, then press

When DIGITAL SETUP menu appears, press

to select CC SETTING and press

You can choose from AUTO, SMALL, LARGE, CUSTOM, and press MENU/ENTER.

Press MENU/ENTER to return to the normal screen.

CC SETTING (DIGITAL MODE)

TV-Y7

TV-G

TV-14

TV-MA

TV–Y

TV-PG

OFF

TV RATING

TV-Y

: all children

TV-Y7

: 7 years old and above

TV-G

: children’s program

TV-PG

: parental guidance

TV-14

: 14 years old and above

TV-MA

: 17 years old and above

: parental guidance for under 17 years old

NC-17

: 17 years old and above

: adult only

: all ages

: parental guidance

PG-13

: parental guidance for under 13 years old

SETTING V-CHIP

This TV is equipped with a channel memory feature which allows channels to skip up or down to the next

channel set into memory, skipping over unwanted channels.

Before selecting channels, they must be programmed into the TV’s memory. To use this TV with an antenna,

set the TV/CATV menu option to the TV setting. When shipped from the factory, this menu option is in the

CATV setting.

TV/CATV SELECTION

Press MENU/ENTER.

Press

until the indicator next to “CH SETUP” begins to ﬂ ash,

then press

Press

until the indicator next to “TV CABLE” begins to ﬂ ash.

Press

to select the TV or CABLE mode. The arrow indicates the

selected mode.

Press EXIT to return to the normal screen.

The chart below is typical of many cable system channel allocations.

NOTE:

Contact your cable company to determine the type of cable system used in your area.

TO MEMORIZE CHANNELS

CATV CHART

Press

Press EXIT to return to the normal screen.

WHAT IS CLOSED CAPTIONING?

This television has the capability to decode and display Closed Captioned television programs. Closed

Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in

another language.

TO VIEW CLOSED CAPTIONS

Press CLOSED CAPTION on the remote control to switch between normal TV and the two Closed Caption

Modes (Captions and 1/2 of Full Screen Text).

Captions:

This Closed Caption Mode will display text on the screen in English or another language (depending

on the setting of the Closed Captions CH.1/2 button). Generally, Closed Captions in English are transmitted on

Captions Channel 1 and Closed Captions in other languages are transmitted on Captions Channel 2.

Text:

The Text Closed Caption Mode will usually ﬁ ll 1/2 of full screen with a programming schedule or other

information. After selecting a Closed Caption Mode, it will stay in effect until it is changed, even if the channel is

changed. If the Captions signal is lost due to a commercial or a break in the signal, the Captions will reappear

when the signal is received again. If the channels are changed, the Captions will be delayed approximately 10

seconds.

The Captions will appear in places on the screen where they will least interfere with the picture, usually on the

bottom of the screen. News programs will usually show three-line Closed Captions which scroll onto the screen.

Most other shows provide two or three lined Captions placed near the character who is speaking so the viewer

can follow the dialogue.

Words in italics or underlined describe titles, words in foreign languages or words requiring emphasis. Words

that are sung usually appear enclosed by musical notes.

For television programs broadcasting with Closed Captions, look in your TV guide for the Closed Captions

symbol (CC).

TO VIEW CLOSED CAPTIONS (ANALOG MODE)

Press MENU/ENTER in the analog mode.

Press

to select CLOSED CAPTION, then press

Press

to select the desired Closed Caption mode,

then press MENU/ENTER.

NOTE:

To return the Cloesd Caption feauture off, select “OFF”.

Press EXIT to return to the normal screen.

TO VIEW CLOSED CAPTIONS (DIGITAL MODE)

Press MENU/ENTER in the digital mode.

Press

to select DIGITAL SETUP, then press

When DIGITAL SETUP menu appears, press

to select

CLOSED CAPTION then press

Press

to select ANALOG CAPTION or DIGITAL CAPTION,

then press

Press

to select the desired Closed Caption mode,

then press MENU/ENTER.

NOTE:

To turn the Cloesd Caption feauture off, select “OFF”.

Press MENU/ENTER until the menu screen is cleared.

NOTES:

• Depending on the broadcast signal, some Analog Captions will function with a Digital broadcast signal.

This screen can be displayed by pressing CLOSED CAPTION on the remote control.

• When activating the Closed Captioned Decoder, there will be a short delay before the Closed Captioned

text appears on the screen.

• Closed Captioned text is only displayed in locations where it is available.

• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.

• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal

with Closed Captioning, especially with live programs. This is because during live programs, captions

are also entered live. These transmissions do not allow time for editing.

• When Captions are being displayed, on-screen displays, such as volume and mute may not be seen or

may interfere with Closed Captions.

• Some cable systems and copy protection systems may interfere with the Closed Captioned signal.

• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear

or may appear with strange characters or misspelled words. In this case, adjust the antenna for better

reception or use an outdoor antenna.

CLOSED CAPTION

Press

Press EXIT to return to the normal screen.

Press

When DIGITAL SETUP menu appears, press

Press

then press

Press

then press MENU/ENTER.

Press

Press MENU/ENTER until the menu screen is cleared.

Specyfikacje produktu

Marka:	Sansui
Kategoria:	Telewizor plazmowy LCD
Model:	DTV1900

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sansui DTV1900, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Telewizor plazmowy LCD Sansui

Sansui SLED1953W Instrukcja

5 Października 2024

Sansui HDLCD1955 Instrukcja

24 Września 2024

Sansui SLED2228 Instrukcja

23 Września 2024

Sansui SLED1980 Instrukcja

23 Września 2024

Sansui DTV1900 Instrukcja

23 Września 2024

Sansui SLED1937 Instrukcja

17 Września 2024

Sansui LCDVD150 Instrukcja

12 Września 2024

Sansui SLED4650 Instrukcja

11 Września 2024

Sansui HDLCD3200 Instrukcja

2 Września 2024

Sansui SLED2280 Instrukcja

30 Sierpnia 2024

Instrukcje Telewizor plazmowy LCD

Najnowsze instrukcje dla Telewizor plazmowy LCD

Viewsonic n 2060w Instrukcja

5 Października 2024

BenQ dv 3251 Instrukcja

5 Października 2024

Sanyo DP32640 Instrukcja

28 Września 2024

Sanyo DP50741 Instrukcja

28 Września 2024

Sanyo DP42841 Instrukcja

27 Września 2024

Yakumo 81 j Instrukcja

27 Września 2024

D.BOSS PDP 4219 Instrukcja

26 Września 2024

Magnavox 40MF401B Instrukcja

26 Września 2024

Fujitsu Siemens MYRICA VQ40-1 Instrukcja

26 Września 2024

Fujitsu Siemens MYRICA PQ50-1 Instrukcja

26 Września 2024