Instrukcja obsługi RYOBI RSC1840
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RYOBI RSC1840 (24 stron) w kategorii Inny. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/24
ORIGINAL INSTRUCTIONS
Cordless
Surface Cleaner
RSC1840
OSC1800
Important!
It is essential that you read the instructions in this manual before assembling,
operating and maintaining the product.
Subject to technical modification.
1
Safety, performance, and dependability have been given
top priority in the design of your cordless surface cleaner.
INTENDED USE
The cordless surface cleaner is intended to be used only by
adults who have read and understood the instructions and
warnings in this manual and can be considered responsible
for their actions.
For safety reasons, the product must be adequately
controlled by a two-handed operation.
The product is intended only for outdoor use in a well-
ventilated area. The product is used to clean at surfaces,
joints, and in-between surfaces outdoors, including stone
slabs, tiles, paving stones, and wood surfaces. The product
is not suitable for vertical use like house walls and overhead
work like ceilings.
Do not use the product for any other purpose.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
WORK AREA SAFETY
■Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
■Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
■Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
■Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
■Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
■Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
■Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
■When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
■If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
PERSONAL SAFETY
■Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may
result in serious personal injury.
■Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.
■Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
■Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
■Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
■Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
■If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
■Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
POWER TOOL USE AND CARE
■Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
■Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
■Disconnect the plug from the power source and/
or the battery pack, if detachable, from the power
tool before making any adjustments, changing
accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power
tool accidentally.
Specyfikacje produktu
| Marka: | RYOBI |
| Kategoria: | Inny |
| Model: | RSC1840 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z RYOBI RSC1840, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Inny RYOBI
23 Września 2024
5 Września 2024
Instrukcje Inny
- Inny Voltcraft
- Inny Milwaukee
- Inny Stihl
- Inny Bosch
- Inny Parkside
- Inny Festool
- Inny Panasonic
- Inny Stanley
- Inny Scheppach
- Inny Proxxon
- Inny Grizzly
- Inny DeWalt
- Inny Einhell
- Inny Hyundai
- Inny Makita
- Inny Fuxtec
- Inny Flex
- Inny GLORIA
- Inny Wagner
- Inny Dremel
- Inny AL-KO
- Inny Güde
- Inny ATIKA
- Inny Airpress
- Inny Ferrex
- Inny Digi
- Inny Tronic
- Inny TurboTronic
- Inny Omega
- Inny Fein
- Inny Ferm
- Inny Kyoritsu
- Inny PowerPlus
- Inny Vonroc
- Inny Powerfix
- Inny HiKOKI
- Inny Workzone
- Inny EasyMaxx
- Inny OKAY
- Inny Sievert
- Inny Skil
- Inny Laserliner
- Inny Greenworks
- Inny Alpina
- Inny Altrex
- Inny Brennenstuhl
- Inny Lotus
- Inny Oregon
- Inny Topcraft
- Inny Sparky
- Inny Gamma
- Inny Zodiac
- Inny Renovator
- Inny Turbotech
- Inny Dolmar
- Inny Duro
- Inny Maxicool
- Inny Varo
- Inny Defort
- Inny Max
- Inny Emco
- Inny Eliet
- Inny Bruder Mannesmann
- Inny Probuilder
- Inny Rupes
- Inny Batavia
- Inny Heidenhain
- Inny Xenteq
- Inny Tecomec
- Inny Holzmann
- Inny Hofmann
- Inny Kraft
- Inny Stomer
- Inny Blucave
- Inny NDS
- Inny Bostitch
- Inny Kompernass
- Inny Triton
- Inny Ateq
- Inny Ideen Welt
- Inny Sola
- Inny Ergofix
- Inny Flowserve
- Inny Maxxtools
- Inny PLS - Fluke
- Inny Spero
- Inny Datona
- Inny Komatsu
- Inny Rawlink
- Inny DAP
- Inny Dollken-Weimar
- Inny Powerfix Profi
- Inny Mac Allister
- Inny Gude Pro
- Inny MSW
Najnowsze instrukcje dla Inny
14 Października 2024
14 Października 2024
30 Września 2024
30 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024