Instrukcja obsługi Russound MIXAMP-60

Russound system hi-fi MIXAMP-60

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Russound MIXAMP-60 (11 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/11

www.russound.com

MIC1 MIC3/LINE2 LINE3 LINE4 TEL BASS TREBLE

MASTER

456

MIC2/LINE2

Mode Play Folder RPT Prev/V- Next/V+ USB

IR ON

PROT

CLIP

-10

-30

POWER

006

001

NOR ROOT

00:21/03:36

MUSIC.mp3

MixAmp-60 | 70V Mixer Amplier with Media Player2

SAFETY WARNINGS

1. Read and keep these instructions.

2. Heed all warnings and follow all instructions.

3. Do not use this apparatus near water.

4. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

5. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus that produce

heat.

6. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong is provided for your safety. If the

provided plug does not ﬁt into your outlet, consult an

electrician for replacement of the obsolete outlet.

7. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

8. Only use attachments/accessories speciﬁed by the

manufacturer.

9. Use only with the cart, stand, tripod, bracket, or table

speciﬁed by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

10. Unplug this apparatus during lightning storms or when

unused for long periods of time.

11. Refer all servicing to qualiﬁed service personnel. Servicing

is required when the apparatus has been damaged in

any way, such as power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain

or moisture, does not operate normally, or has been

dropped.

12. This appliance shall not be exposed to dripping or

splashing water and no object ﬁlled with liquid such as

vases shall be placed on the apparatus.

13. Plug this apparatus into the proper wall outlet and make

the plug can be easily disconnected.

14. Main plug is used as the disconnect device and it should

remain readily operable during intended use. In order to

disconnect the apparatus from the mains completely,

the mains plug should be disconnected from the mains

socket outlet completely.

15. WARNING: To reduce the risk of ﬁre or electric shock, do

not expose this apparatus to rain or moisture.

16. An appliance with a protective earth terminal should

be connected to a mains outlet with a protective earth

connection.

SAFETY WARNINGS

WARNING:: TO REDUCE THE RISK

OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONAL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: Touching uninsulated terminals

or wiring may result in electric shock

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING!

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE

PLUG WITHAN EXTENSION CORD, RECEPTACLE OR

OTHER OUTLET UNLESS THE BLADES CAN B E FULLY

INSERTED TO PREVENT BLADE EXPOSURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

TO PREVENT ELECTRICAL SHOCK,

MATCH WIDE BLADE PLUG TO WIDE SLOT, FULLY INSERT.

MixAmp-60 | 70V Mixer Amplier with Media Player3

Ventilation Requirements

Important: The MixAmp-60 should be situated so that

its location or position does not interfere with its proper

ventilation. Do not block vents above or to the sides of the unit,

as it requires ventilation for proper operation. Do not expose

to excessive dust, and do not allow dust to build up on the

unit and block ventholes. Do not place the MixAmp-60 directly

above or below a heat-generating component such as an

audio ampliﬁer.

Be sure to leave at least 2 inches of space to the sides of the

unit with open airﬂow above. A single-space rack mount vent

or about 1.75 inches must be kept clear above and below the

unit.

Installation

The MixAmp-60 can be rack mounted or placed on a shelf

in an equipment rack. It occupies two rack spaces with feet

removed. Use only the included rack mount ears and hardware

to rack mount the MixAmp-60.

Electrical Power

The MixAmp-60 operates at 110-230VAC at 50/60 Hz. It is

recommended that the MixAmp-60 and any connected source

equipment be plugged into a dedicated 20-amp circuit. A

power line conditioner can reduce interference problems

caused by noise found in some electrical systems.

The power switch for the unit is on the front panel.

Important Considerations

• This product is to be operated by trained personnel only.

• Disconnect the power cord before making any wiring

connections to the device.

• Verify that all connections and wiring polarity are correct.

• Keep all power cords away from all signal cables to prevent

humming from induced noise.

• Choose reliable signal cables and patch cords.

• Label all wires with the room location at both ends of the

wire.

• Avoid running speaker wires or signal cables close to

electrical wiring for any distance. If you have to run them

parallel, make sure to space the wires at least two feet from

the AC line. If you need to cross an AC line it should be at

a 90° angle.

• Do not connect the main power cord until all other

connections have been made and veriﬁed. Live connection

or removal of source or speaker wiring or other wiring when

the system is powered can result in erratic operation or

system damage. Touching live terminals or wiring can result

in shock.

• Double-check terminations during each phase of the

installation to prevent accidental damage. Incorrect wiring

is the number one cause for non-warranty product damage.

Overview

Description

The MixAmp-60 Mixer Ampliﬁer with MP3, FM tuner &

Bluetooth, is ideal for schools, supermarkets, convenience

stores, banks, retail stores and similar environments. It is

an all-in-one solution with built-in audio sources, pre-amp

mixing, audio ampliﬁcation, expandability to external

sources, microphones, etc., in one small, rack-mountable

chassis.

The MixAmp-60 integrates combinations of up to 3

microphones and 4 external audio sources in addition to

its built-in FM Tuner, Bluetooth receiver, USB, and SD

card MP3 player. Convenient front panel controls allow for

precise volume level of all connected sources as well as an

integrated LCD display showing currently selected audio

from the built-in sources. Background Music (BGM) and

Music On Hold (MOH) integration are available as well as a

Telephone Paging Input. Phantom Power is available for the

primary microphone as well as adjustable ducking levels.

Features

• Compact Design

• Built-in 70V/100V transformer technology

• Tabletop ampliﬁer with MP3 player, FM radio & Bluetooth

• 60W Power Output

• Speaker outputs of 70V, 100V, 4 Ohms, 8 Ohms, and

16 Ohms

• MP3 player with USB/SD input on front panel, IR remote

control for MP3 player, FM radio and Bluetooth

• LED indicators for power, clipping, protection and signal

• Mic 1 is a balanced XLR input with conﬁgurable phantom

power support. Mics 2 & 3 are switchable, unbalanced,

removable screw-down Phoenix connectors types and

can alternate between microphones or line inputs.

• Includes a built-in telephone input with VOX priority and

MOH (Music on Hold) output.

• Convenient Front-Panel Volume Controls for all physical

inputs, MP3/FM, master volume as well as bass/treble

• Line out for use with an optional external ampliﬁer if more

power is needed

• Built-in short-circuit, clipping, overload and over-

temperature protection

PREPARATION & OVERVIEW

Specyfikacje produktu

Marka:	Russound
Kategoria:	system hi-fi
Model:	MIXAMP-60

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Russound MIXAMP-60, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje system hi-fi Russound

Russound CAA66 Instrukcja

4 Października 2024

Russound USRC Instrukcja

4 Października 2024

Russound MCA-66 Instrukcja

4 Października 2024

Russound XTS5.5 Instrukcja

4 Października 2024

Russound BTA-2 Instrukcja

4 Października 2024

Russound KPSC Instrukcja

4 Października 2024

Russound MCA-88 Instrukcja

4 Października 2024

Russound XTSPlus Instrukcja

4 Października 2024

Russound ISK2 Instrukcja

4 Października 2024

Russound TBL-75 Instrukcja

4 Października 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

AKAI EIE Pro Instrukcja

13 Października 2024

Sharp XL-540H Instrukcja

11 Października 2024

Kenwood M-9000S Instrukcja

10 Października 2024

GoGen MSC 472 BTDAB Instrukcja

9 Października 2024

Morel SUB-10X Instrukcja

9 Października 2024

Morel USUB 803 Instrukcja

9 Października 2024

Morel Soundsub PSW8e-w Instrukcja

9 Października 2024

Morel Sopran 934 Instrukcja

9 Października 2024

NAD M10 V3 Instrukcja

9 Października 2024

NUVO NV-MPS4-E Instrukcja

8 Października 2024