Instrukcja obsługi Russound KNX-RIO-1

Russound Niesklasyfikowane KNX-RIO-1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Russound KNX-RIO-1 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

KNX-RIO-1

KNX Gateway

Installation Manual

Overview

The Russound KNX-RIO-1 Gateway is a device that allows

KNX panels and keypads to operate Russound controllers

that support the RIO protocol. The KNX-RIO-1 gateway

supports control of 2 MCA Controllers for up to 16 zones,

or one X5 for 1 zone.

The KNX-RIO-1 can be congured in the standard KNX

ETS Software program to perform a number of control

functions, including basic Zone control. The KNX-RIO-1

also supports metadata feedback for those sources that

support metadata (i.e. Russound streamers) and KNX

keypads and panels that can display the metadata.

The Russound KNX-RIO-1 has standard KNX Bus

connections and two LED lights (Red and Green) to indicate

connection status and programming download status. The

KNX-RIO-1 also contains an Ethernet port with standard

Ethernet status lights for connecting to a local network. The

KNX-RIO-1 is designed to be installed on 35mm DIN Rails and

is powered by the KNX Bus or a separate dedicated power

supply (sold separately).

Russound, Inc. 1 Forbes Rd., Newmarket, NH 03857, USA

tel +1.603.659.5170 • fax +1.603.659.5388 www.russound.com

technical support: +1.866.888.7466

e-mail: intltech@russound.com 28-1393 12.11.15 Rev.6

are the property of their respective owners. Specications are

subject to change without notice.

Specications

Power supply: from KNX Bus

Power consumption: Max. 80 mA using only KNX Bus

terminal, Max. 10 mA connecting

12 – 24 VDC to the auxiliary screw terminal

CAT-5 connection: RJ-45 (T568A standard)

Dimensions: 3.5” H x 1.4” W x 2.4”D, (9cm x 3.6cm x 6.2cm)

Weight: 1.6 oz (45 gr)

Limited Warranty

The Russound KNX-RIO-1 is guaranteed against all defects in

materials and workmanship for two (2) years from the date of

purchase. During this period, Russound will replace any defective

parts and correct any defect in workmanship without charge for

either parts or labor. For this warranty to apply, the unit must be

installed and used according to its written instructions. If service

is necessary, it must be performed by Russound. The unit must

be returned to Russound at the owner’s expense and with prior

written permission. Accidental damage and shipping dam-

age are not considered defects, nor is damage resulting from

abuse or from servicing by an agency or person not specically

authorized in writing by Russound. This Warranty does not cover:

Damage caused by abuse, accident, mis-use, negligence, or

improper installation or operation; Power surges and lightning

strikes; Normal wear and maintenance; Products that have been

altered or modied; Any product whose identifying number,

decal, serial number, etc. has been altered, defaced or removed.

Russound sells products only through authorized Dealers and

Distributors to ensure that customers obtain proper support and

service. Any Russound product purchased from an unauthorized

dealer or other source, including retailers, mail order sellers and

online sellers will not be honored or serviced under existing Rus-

sound warranty policy. Any sale of products by an unauthorized

source or other manner not authorized by Russound shall void

the warranty on the applicable product.

Damage to or destruction of components due to application of

excessive power voids the warranty on those parts. In these cases,

repairs will be made on the basis or the retail value of the parts and

labor. To return for repairs, the unit must be shipped to Russound

at the owner’s expense, along with a note explaining the nature of

service required. Be sure to pack the unit in a corrugated container

with at least three (3)inches of resilient material to protect the

unit from damage in transit. Before returning a unit for repair, call

Russound at for a Return Authorization number. 866.888.7466

Write this number on the shipping label and ship to: Russound,

ATTN: Service, 1 Forbes Road, Newmarket, NH 03857.

Communication Objects: Zones/Controller Settings (zone 1 active)

Communication Objects for Controller 1 are the same

for each of the eight (8) zones of the Controller (see

example above – Communication Objects for C1Z1).

These Communication Objects correspond to functions

of RIO commands, as described in Russound RIO Protocol

documentation. The name of the Object describes the

function of that object. For example, PLAY/PAUSE – C1Z1

will perform a Play/Pause toggle in Zone 1.

Most of the Communication Objects are 1-bit Objects. A

value of “1” issues a positive function, like ON, NEXT, UP, or

PLAY, and a value of “0” issues a negative function, like OFF,

PREV, DOWN, or PAUSE. SOURCE TOGGLE uses only a value

of “1”. Volume can be set from 0 to 50.

The Russound System can store up to 32 Global Favorites.

Favorites can be stored and edited by the user with

Russound keypads (MDK, TS3) or the MyRussound app

(Android, iOS). These Favorites can then be recalled in a

zone with the RECALL SYS FAV object. The value assigned

to the object determines which Favorites is recalled. Many

KNX panels will refer to these values as “scenes”, so assigning

“scene 1, scene 2” to two buttons on KNX panel within

Group Addressing with RECALL SYS FAV C1Z1 Object will

recall Favorite #1 and Favorite #2, respectively for Zone 1.

The same Favorites can be recalled in Zone 2 by assigning

RECALL SYS FAV C1Z2 to a KNX panel in zone 2, etc.

Note: System Favorites are stored in order. If a user

DELETES a System Favorite from a Russound interface, it

will no longer be associated with the KNX panel button.

Instead, we recommend the user “EDIT” the System

Favorite, should they desire a dierent channel/preset/

internet radio station to be recalled by that button.

Note: System Favorites can be used to recall a number of

source audio functions, such as an Internet Radio Station,

a Cable/Satellite box channel, and AM/FM tuner preset,

and others. Depending on the source, some additional

programming may be required with the Russound SCS-C5

programming software for MCA Controllers.

Communication Objects: Source Feedback

The KNX-RIO-1 supports Source Metadata Feedback for all

8 sources in a Russound system. The Feedback messages

supported are shown in the example above. Each source

feedback object is a 14-byte text object. Each Source

feedback object exists per zone, so if SOURCE NAME is

desired to display on KNX panels, then SOURCE NAME

S/C1Z1 would be assigned to a KNX panel for Zone 1, and

SOURCE NAME S/C1Z2 would be assigned to a panel for

Zone 2, etc.

ETS Application

Application for KNX Russound gateway KNX-RIO-1 can be downloaded from the Russound Support Center under

Documents and Files > Integration. http://www.russound.com/portal

Device in ETS after its application import - For more information please reference ETS Help documentation.

Application window: General setting

Function Settings Description

IP address of controller

ID = 1

Default:

192.168.1.1

Enter the IP address assigned for the main Russound controller. The KNX-

RIO-1 can be used with 2 MCA controllers for up to 16 zones.

Application window: Zones/Controller settings (Select controller ID)

Function Settings Description

First controller ID / Second controller ID none/1/2/3/4/5/6 (default: none) Choose the controller ID setting.

1KNX Bus terminal: Red (+) and grey (-) for KNX Bus connection.

2PROGRAM Button: Physical address programming button.

3PROGRAM LED: Solid RED indicates KNX-RIO-1 is ready for

KNX Bus Physical Address download via ETS software.

4RUN LED: Blinks GREEN until connection with Russound

controller is established. (Average time is less than 1 minute

depending on the router). After connection is rst established,

future reconnections (power on/o, Ethernet disconnect/

reconnect) should take less time to connect (a few seconds).

Indicates a properly downloaded and Solid Green LED:

running ETS application and Ethernet connection with

Russound controller is active.

Either no KNX bus is detected or LED is OFF:

the ETS application is not present.

5Ethernet Connection: GREEN indicates LAN connection is

established. YELLOW indicates DHCP data transmission.

6KNX Physical Address label: Enter the physical address

of the device.

7Power Supply Connection: 12-24VDC, (optional).

Note:

The KNX-RIO-1 comes packaged with a Seal on the device.

Removing this seal will void the Warranty.

Installation and Connection Instructions

1. Snap KNX Russound gateway KNX-RIO-1 to DIN rail 35 x 7.5 mm

(in accordance with EN 60715)

2. Connect KNX cable to the bus terminal

3. Connect Russound controller ID 1 to local network

4. Connect KNX-RIO-1 to local network

5. Turn on Russound controller(s) and set Controller ID 1 to a static IP

address

6. Turn on KNX bus or separate power supply.

7. Edit KNX-RIO-1 ETS le and enter parameter “IP Address of

Controller = 1”

8. Download Phys. Address to device with ETS. Press PROG button

(LED will be solid RED)

9. RUN LED should become solid green (about a minute)

BUS POWER SUPPLY OPTION - (Not recommended) Bus current

consumption - max. 80mA when only bus is connected

BUS + AUXILIARY POWER OPTION – (Recommended) Bus current

consumption - max. 10 mA when aux. voltage is supplied (use SELV

power supply)

KNX-RIO-1

Power Supply

(optional)

KNX cable

Russound

Controller

CAT-5 cable

Network Router

PA_ _._ _._ _ _

Application window: Zones/Controller settings (zone activation)

Function Settings Description

Zone 1 through 8 for

First controller ID /

Second controller ID

Not active/active

(default: not active)

Activates Zones 1 through 8 as needed for the controllers as speciﬁed by their

controller IDs. Once activated, communication objects will appear (see below)

When using the KNX-RIO-1 with an X5, only select Controller 1, Zone 1 to Active.

Specyfikacje produktu

Marka:	Russound
Kategoria:	Niesklasyfikowane
Model:	KNX-RIO-1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Russound KNX-RIO-1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Russound

Russound CA4-KP Instrukcja

8 Października 2024

Russound SA-ZX3 Instrukcja

8 Października 2024

Russound KNX-RIO-1 Instrukcja

8 Października 2024

Russound CB-140 Instrukcja

8 Października 2024

Russound A-H4D Instrukcja

8 Października 2024

Russound CA4-WP Instrukcja

8 Października 2024

Russound A-K4 Instrukcja

8 Października 2024

Russound HTP-7.2 Instrukcja

4 Października 2024

Russound SLM-1K Instrukcja

4 Października 2024

Russound ALT-70V-50 Instrukcja

4 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024