Instrukcja obsługi Russound HTP-7.2


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Russound HTP-7.2 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
HTP-7.2
Home Theater Wallplate
Installation Manual
Overview
The Home Theater Plate (HTP-7.2) is a double-gang in-wall connection plate
designed to allow easy hookup of all the speakers in a 5.1, 6.1 or 7.1-channel
surround sound system. It includes terminals for up to seven speakers, and
two powered/active (low level) subwoofers. Its Decora design allows for
each half to be used independently if desired, for two single-gang plates,
one with 4 pairs of stereo binding posts and one with 3 pairs and a pair of
RCA jacks. The heavy-duty plates support the weight of high-quality wires,
and each connection is clearly labeled. The 7/16” gold-plated binding posts
make for easy and secure connections, and the captured posts won’t turn
while they are being tightened. The 5-way binding posts have gold plating
to resist corrosion and can accept the following: bare or tinned wire up to
12 gauge in thickness, pins, spade lugs, and single or double banana plugs.
The powered subwoofer connections use high quality RCA connectors. Be
sure to use only those connectors that are approved for audio or low voltage
use in your area.
Wiring Instructions
Be sure to use adequate gauge wires, depending upon the length of each
wire. Consult the following table for general recommendations or contact
your installer or speaker manufacturer.
Length Minimum Gauge
10 to 100 ft. 16
100 to 200 ft. 14
Over 200 ft. 12
Leave enough excess wire so as not to put too much tension on any
connections, as this can lead to loosened or inconsistent terminations. Keep
speaker wires and RCA cables away from AC wiring. If these wires must
occupy the same area, keep them as far apart as possible and have them
cross at right angles when crossing is necessary.
Russound, Inc. 1 Forbes Rd., Newmarket, NH 03857, USA
tel 603.659.5170 • fax 603.659.5388 www.russound.com
technical support: 866.888.7466 e-mail: tech@russound.com
Copyright ©2017 Russound® All rights reserved. All trademarks are the property of their
respective owners. Russound is not responsible for typographical errors or omissions.
Specications are subject to change without notice.
Limited Warranty
The Russound HTP-7.2 is guaranteed for two (2) years from the date of purchase against
all defects in materials and workmanship. During this period Russound will replace any
defective parts and correct any defect in workmanship without charge for either parts
or labor. For this warranty to apply, the unit must be installed and used according
to its written instructions. If service is necessary, it must be performed by Russound.
Russound assumes no responsibility for defects resulting from abuse or servicing
performed by an agency or person not specically authorized in writing by Russound.
Damage to or destruction of components due to improper use voids the warranty. In
these cases the repair will be made at the owner’s expense. Accidental damage and
shipping damage are not considered defects under the terms of the warranty. To return
for repairs, the unit must be shipped to Russound at the owner’s expense, along with a
Return Authorization number and documentation explaining the nature of the service
required. Any product returned without prior written permission will be returned to
sender. Russound sells products only through authorized Dealers and Distributors
to ensure that customers obtain proper support and service. Any Russound product
purchased from an unauthorized dealer or other source, including retailers, mail order
sellers and online sellers will not be honored or serviced under existing Russound
warranty policy. Any sale of products by an unauthorized source or other manner not
authorized by Russound shall void the warranty on the applicable product.
Specications
Dimensions: 4.8W x 4.8H x 1.1D inches (12.2 x 12.2 x 2.8 cm)
Weight: 10.5 oz. (298 g)
Connectors: (14) 5-way binding posts
(2) RCA connectors
Plate Connections
1. When making any connections, make sure all the equipment is turned
o and unplugged.
2. When inserting any wires or connectors, be sure that they don’t bridge
over to another terminal or wire, causing a short circuit.
3. Typically one conductor is marked in some way, either with printing
on the outer jacket, dierent color wire conductors, a formed ridge on
the outer jacket or a thread running within one of the conductors. By
convention the marked conductor is the positive or hot lead (Red).
4. It is very important to maintain proper phasing by hooking the
positive leads to the positive terminals and negative leads to negative
terminals on every component. If one speaker is wired backwards there
will typically be a lack of bass response and the sound may appear to
wander between the speakers rather than be precisely placed.
Pin connector - Loosen the post, insert the pin into the side hole on the
binding post, then tighten the post.
Spade connector - Loosen the post. Insert the spade so that it hugs the
binding post, then tighten the post.
Banana plug connector - Make sure the post is tight. Insert the banana
plug as far as it will go into the top hole of the binding post.
Bare or tinned wire - Strip the speaker wires, exposing approximately 1/2
inch (14mm) of wire. Individually twist each conductor to keep the strands
of wire bundled together. Loosen post, insert wire into the side hole of the
binding post, then tighten the post.
RCA connector - Use the RCA connectors for powered/active subwoofers
or for any device requiring an RCA cable.
02.16.17, Rev.1


Specyfikacje produktu

Marka: Russound
Kategoria: Niesklasyfikowane
Model: HTP-7.2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Russound HTP-7.2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Russound

Russound

Russound CA4-KP Instrukcja

8 Października 2024
Russound

Russound SA-ZX3 Instrukcja

8 Października 2024
Russound

Russound KNX-RIO-1 Instrukcja

8 Października 2024
Russound

Russound CB-140 Instrukcja

8 Października 2024
Russound

Russound A-H4D Instrukcja

8 Października 2024
Russound

Russound CA4-WP Instrukcja

8 Października 2024
Russound

Russound A-K4 Instrukcja

8 Października 2024
Russound

Russound HTP-7.2 Instrukcja

4 Października 2024
Russound

Russound SLM-1K Instrukcja

4 Października 2024
Russound

Russound ALT-70V-50 Instrukcja

4 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024