Instrukcja obsługi Roland SP-540V

Roland drukarka SP-540V

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Roland SP-540V (29 stron) w kategorii drukarka. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/29

USER'S MANUAL

Thank you very much for purchasing this product.

➢To ensure correct and safe usage with a full understanding of this product's performance, please be

sure to read through this manual completely and store it in a safe location.

➢Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.

➢The contents of this operation manual and the specifications of this product are subject to change

without notice.

➢The operation manual and the product have been prepared and tested as much as possible. If you

find any misprint or error, please inform us.

➢Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may

occur through use of this product, regardless of any failure to perform on the part of this product.

➢Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may

occur with respect to any article made using this product.

As an ENERGY STAR® Partner, Roland DG Corp. has determined that this product meets the ENERGY

STAR® guidelines for energy efficiency.

The International ENERGY TAR S® Office Equipment Program is an international program that

promotes energy saving through the penetration of energy efficient computers and other office

equipment. The program backs the development and dissemination of products with functions that

effectively reduce energy consumption. It is an open system in which business proprietors can

participate voluntarily. The targeted products are office equipment such as computers, monitors, printers, facsimiles,

copiers, scanners, and multifunction devices. Their standards and logos are uniform among participating nations.

For the USA

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE

STATEMENT

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated

in a commercial environment.

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference

to radio communications.

Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Unauthorized changes or modification to this system can void

the users authority to operate this equipment.

NOTICE

Grounding Instructions

Do not modify the plug provided - if it will not fit the outlet,

have the proper outlet installed by a qualified electrician.

Check with qualified electrician or service personnel if the

grounding instructions are not completely understood, or if in

doubt as to whether the tool is properly grounded.

Use only 3-wire extension cords that have 3-prong

grounding plugs and 3-pole receptacles that accept the tool’s

plug.

Repair or replace damaged or worn out cord immediately.

For Canada

CLASS A NOTICE

This Class A digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

CLASSE A AVIS

Cet appareil numérique de la classe A respecte toutes les

exigences du Règlement sur le matériel brouilleur du

Canada.

ROLAND DG CORPORATION

1-6-4 Shinmiyakoda, Hamamatsu-shi, Shizuoka-ken, JAPAN 431-2103

MODEL NAME : See the MODEL given on the rating plate.

RELEVANT DIRECTIVE : EC LOW VOLTAGE DIRECTIVE (73/23/EEC)

EC ELECTROMAGNETIC COMPATIBILITY DIRECTIVE (89/336/EEC)

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which

case the user may be required to take adequate measures.

Table of Contents

Table of Contents ................................................................................................................................. 1

To Ensure Safe Use ....................................................................................................................... 4

Pour utiliser en toute sécurité .................................................................................................... 9

Important Notes on Handling and Use ........................................................................................... 15

Chapter 1 Introduction ...................................................................................................................... 17

1-1 Machine Features ................................................................................................................................................. 18

1-2 Part Names and Functions ................................................................................................................................ 19

Printer Unit .................................................................................................................................... 19

Operation Panel ............................................................................................................................ 21

Chapter 2 Operation .......................................................................................................................... 23

2-1 Switching the Power On and Off ..................................................................................................................... 24

Switching the Power On and Off ................................................................................................... 24

The Power-saving Feature .............................................................................................................. 25

2-2 Loading and Cutting Off Media ........................................................................................................................ 26

How to Load Roll Media ............................................................................................................... 26

How to Cut Off Media ................................................................................................................... 31

2-3 Print Heater and Dryer Settings ...................................................................................................................... 32

What Are the Print Heater and Dryer? ........................................................................................... 32

Temperature Settings ..................................................................................................................... 32

General Guide for the Preset Temperatures ................................................................................... 33

2-4 Starting Output .................................................................................................................................................... 34

Getting Ready to Receive Data from a Computer .......................................................................... 34

Printing Test and Cleaning ............................................................................................................. 35

2-5 If Ink Runs Out ..................................................................................................................................................... 36

Checking for Remaining Ink .......................................................................................................... 36

If Ink Runs Out .............................................................................................................................. 37

2-6 Performing Cutting .............................................................................................................................................. 38

To Perform Cutting ......................................................................................................................... 38

Performing a Cutting Test ............................................................................................................... 39

Making the Setting for Blade Force ................................................................................................ 39

Chapter 3 Maintenance and Adjustment ......................................................................................... 41

3-1 Daily Care and Maintenance ............................................................................................................................. 42

Disposing of Discharged Ink ......................................................................................................... 42

Cleaning ........................................................................................................................................ 43

Care and Maintenance of the Print Heads ..................................................................................... 44

3-2 When Head Cleaning Is Not Effective ............................................................................................................ 45

Performing More Powerful Cleaning.............................................................................................. 45

When Powerful Cleaning Is Not Effective ...................................................................................... 45

3-3 Cleaning the Heads Using the Cleaning Kit .................................................................................................. 46

When the Cleaning Kit Becomes Necessary .................................................................................. 46

How to Perform Cleaning .............................................................................................................. 46

3-4 Replacing Consumable Parts ............................................................................................................................. 51