Instrukcja obsługi Roland SC-545EX

Roland drukarka SC-545EX

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Roland SC-545EX (135 stron) w kategorii drukarka. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/135

Thank you very much for purchasing the product.

• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read

through this manual completely and store it in a safe location.

• Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.

• The contents of this operation manual and the specifications of this product are subject to change without notice.

• The operation manual and the product have been prepared and tested as much as possible. If you find any

misprint or error, please inform us.

• Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur through

use of this product, regardless of any failure to perform on the part of this product.

• Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur with

respect to any article made using this product.

User’s Manual

For the USA

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE

STATEMENT

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated

in a commercial environment.

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference

to radio communications.

Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Unauthorized changes or modiﬁcation to this system can void

the users authority to operate this equipment.

For Canada

CLASS A NOTICE

This Class A digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

CLASSE A AVIS

Cet appareil numérique de la classe A respecte toutes les

exigences du Règlement sur le matériel brouilleur du

Canada.

ROLAND DG CORPORATION

1-6-4 Shinmiyakoda, Hamamatsu-shi, Shizuoka-ken, JAPAN 431-2103

MODEL NAME : See the MODEL given on the rating plate.

RELEVANT DIRECTIVE : EC LOW VOLTAGE DIRECTIVE (73/23/EEC)

EC ELECTROMAGNETIC COMPATIBILITY DIRECTIVE (89/336/EEC)

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which

case the user may be required to take adequate measures.

NOTICE

Grounding Instructions

Do not modify the plug provided - if it will not ﬁt the outlet,

have the proper outlet installed by a qualiﬁed electrician.

Check with qualiﬁed electrician or service personnel if the

grounding instructions are not completely understood, or if in

doubt as to whether the tool is properly grounded.

Use only 3-wire extension cords that have 3-prong

grounding plugs and 3-pole receptacles that accept the tool’s

plug.

Repair or replace damaged or worn out cord immediately.

Operating Instructions

KEEP WORK AREA CLEAN. Cluttered areas and benches

invites accidents.

DON’T USE IN DANGEROUS ENVIRONMENT. Don’t

use power tools in damp or wet locations, or expose them to

rain. Keep work area well lighted.

DISCONNECT TOOLS before servicing; when changing

accessories, such as blades, bits, cutters, and like.

REDUCE THE RISK OF UNINTENTIONAL STARTING.

Make sure the switch is in oﬀ position before plugging in.

USE RECOMMENDED ACCESSORIES. Consult the

owner’s manual for recommended accessories. The use of

improper accessories may cause risk of injury to persons.

NEVER LEAVE TOOL RUNNING UNATTENDED.

TURN POWER OFF. Don’t leave tool until it comes to a

complete stop.

Contents

Features of the SC-545EX............................................................................4

To Ensure Safe Use ......................................................................................5

Pour utiliser en toute sécurité.....................................................................9

Chapter 1: Getting Started........................................................................15

1-1 Checking Accessories .................................................................................................................. 16

1-2 Part Names .................................................................................................................................. 17

1-3 Assembling and Installing............................................................................................................. 20

Installation Environment .......................................................................................................................................... 20

Step 1: Assemble the Stand ...................................................................................................................................... 21

Step 2: Install the Included Items ............................................................................................................................. 23

Step 3: Install the Drain Bottle ................................................................................................................................. 24

Step 4: Remove the Protective Media ...................................................................................................................... 26

1-4 Connecting the Cables ................................................................................................................. 27

Connecting the Power Cord ..................................................................................................................................... 27

Connecting to the Computer .................................................................................................................................... 28

1-5 Switching On the Power for the First Time .................................................................................. 30

Step 1: Install Ink Cartridges.................................................................................................................................... 30

Step 2 : Match the Machine to the Environment Where Installed .......................................................................... 32

1-6 Installing the Blade ....................................................................................................................... 33

Installing a Blade ...................................................................................................................................................... 33

Removing a Blade .................................................................................................................................................... 35

Chapter 2: Basic Operation .......................................................................37

2-1 Examples of Operations with This Machine ................................................................................. 38

2-2 Switching the Power On and Off .................................................................................................. 39

Switching On the Power ........................................................................................................................................... 39

Switching Off the Power at the End of the Day ...................................................................................................... 40

2-3 Loading Media .............................................................................................................................. 41

Loading Roll Media .................................................................................................................................................. 41

Loading Sheet Media................................................................................................................................................ 45

When Loading Thick Media (Only When Printing) ................................................................................................ 46

When Loading Media That Warps Easily (Only When Printing) ........................................................................... 47

Separating the Media ................................................................................................................................................ 48

Removing the Media ................................................................................................................................................ 48

2-4 Printing ......................................................................................................................................... 49

To Perform Printing .................................................................................................................................................. 49

Performing a Printing Test ....................................................................................................................................... 50

Downloading Printing Data ...................................................................................................................................... 50

2-5 Cutting .......................................................................................................................................... 51

To Perform Cutting ................................................................................................................................................... 51

Test Cutting ............................................................................................................................................................... 52

Downloading Cutting Data....................................................................................................................................... 53

2-6 Printing and Cutting...................................................................................................................... 54

Sequence of Operation for Printing and Cutting ..................................................................................................... 54