Instrukcja obsługi Rockford Fosgate P400-4


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Rockford Fosgate P400-4 (64 stron) w kategorii radio samochodowe. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/64
Installation
& Operation
Installation et fonctionnement
Instalación y funcionamiento
Einbau und Betrieb
Installazione e funzionamento
4-CHANNEL AMPLIFIERS
P400-4
P500-4
INTRODUCTION
TABLE OF CONTENTS
2
Dear Customer,
Congratulations on your purchase of the world's finest brand of car audio amplifiers.At Rockford Fosgate we are
fanatics about musical reproduction at its best,and we are pleased you chose our product.Through years of
engineering expertise, hand craftsmanship and critical testing procedures, we have created a wide range of
products that reproduce music with all the clarity and richness you deserve.
For maximum performance we recommend you have your new Rockford Fosgate product installed by an
Authorized Rockford Fosgate Dealer,as we provide specialized training through Rockford Technical Training Institute
(RTTI).Please read your warranty and retain your receipt and original carton for possible future use.
Great product and competent installations are only a piece of the puzzle when it comes to your system. Make sure
that your installer is using 100% authentic installation accessories from Rockford Fosgate in your installation.
Rockford Fosgate has everything from RCA cables and speaker wire to Power line and battery connectors. Insist on
it! After all, your new system deserves nothing but the best.
To add the finishing touch to your new Rockford Fosgate image order your Rockford accessories, which include
everything from T-shirts to jackets and hats.
To get a free brochure on Rockford Fosgate products and Rockford accessories,
visit our web site at: www.rockfordfosgate.com
or,in the U.S. call 1-800-669-9899 or FAX 1-800-398-3985.
For all other countries,call +001-480-967-3565 or FAX +001-480-967-8132.
PRACTICE SAFE SOUND™
Continuous exposure to sound pressure levels over 100dB may cause permanent
hearing loss.High powered auto sound systems may produce sound pressure levels well
over 130dB. Use common sense and practice safe sound.
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Instructions . . . . . . . . . . . . . . . . . . . 3
Design Features. . . . . . . . . . . . . . . . . . . . . . 4
Installation . . . . . . . . . . . . . . . . . . . . . . . . 5-9
Installation Considerations . . . . . . . . . . . . . . 5
Mounting Locations. . . . . . . . . . . . . . . . . . . . 5
Battery and Charging . . . . . . . . . . . . . . . . . . 6
Wiring the System. . . . . . . . . . . . . . . . . . . . . 6
NOTE:Review each section for more detailed information.
If,after reading your manual,you still have questions regarding this product, we recommend that you see
your Rockford Fosgate dealer. If you need further assistance, you can call us direct at
1-800-669-9899.Be sure to have your serial number, model number and date of purchase available when
you call.
The serial number can be found on the outside of the box. Please record it in the space provided below as
your permanent record.This will serve as verification of your factory warranty and may become useful in
recovering your unit if it is ever stolen.
Serial Number: ______________________________________
Model Number: _____________________________________
Operation . . . . . . . . . . . . . . . . . . . . . . . 10-11
Remote Punch EQ (Option). . . . . . . . . . . . 10
Punch EQ. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Adjusting Crossover Frequency . . . . . . . . . 10
2/4 Channel Switch . . . . . . . . . . . . . . . . . . . 10
Adjusting Gain. . . . . . . . . . . . . . . . . . . . . . . 11
Troubleshooting . . . . . . . . . . . . . . . . . . 11-12
Specifications. . . . . . . . . . . . . . . . . . . . . . . 12
Limited Warranty Information . . . . . . . . 13
2007 Rockford Corporation.All rights reserved.
Rockford Fosgate, the Rockford Fosgate logo,the POWER logo and the PUNCH logo
are either registered trademarks or trademarks of Rockford Corporation.
SAFETY INSTRUCTIONS
CONTENTS OF CARTON
3
Visit our web site for the latest information on all Rockford products.
GETTING STARTED
Welcome to Rockford Fosgate! This manual is designed to provide information for the owner,
salesperson and installer.For those of you who want quick information on how to install this product,
please turn to the Installation Section of this manual.Other information can be located by using the
Table of Contents.We,at Rockford Fosgate,have worked very hard to make sure all the information in
this manual is current. But, as we are constantly finding new ways to improve our product, this
information is subject to change without notice.
www.rockfordfosgate.com
This symbol with WARNING” is intended to alert the user to the
presence of important instructions.Failure to heed the instructions
will result in severe injury or death.
This symbol with CAUTION” is intended to alert the user to the
presence of important instructions.Failure to heed the instructions
can result in injury or unit damage.
CAUTION:To prevent injury and damage to the unit,please read and follow the
instructions in this manual.We want you to enjoy this system,not get a
headache.
CAUTION If you feel unsure about installing this system yourself,have it installed by a
qualified Rockford Fosgate technician.
CAUTION Before installation,disconnect the battery negative (-) terminal to prevent
damage to the unit,fire and/or possible injury.
A Punch P400-4 or Punch P500-4
4-Channel Amplifier Installation & Operation Manual
Mounting Hardware Kit
The hardware kit included with each amplifier contains the mounting hardware necessary to secure the
amplifier to the vehicle.
4
DESIGN FEATURES
457 788
996 10 10
13 14
11
12
P500-4
P400-4
1. Power LED (Top of unit - Not Shown) This Blue LED illuminates when the unit is turned on.
2. Thermal LED (Top of unit - Not Shown) This Red LED illuminates if the amplifier internal
components become too hot and engage the thermal protection.The amplifier will shut down to cool
if this occurs.
3. Protect LED (Top of unit - Not Shown) This Yellow LED illuminates if a short circuit or too low of
an impedance is detected at the speaker connections.The amplifier will automatically shut down if this
occurs.
4. Cast Aluminum Heatsink The cast aluminum heatsink of the Punch amplifier dissipates heat
generated by the amplifier's circuitry.
5. Speaker Terminals The heavy duty,nickel-plated clamp wire connectors (+and -) will accept wire
sizes from 8 AWG to 18 AWG.
6. Remote Punch EQ (Optional Controller) The Remote Punch EQ connection is made with a RJ-45
cable and can be installed in a variety of ways for easy control access.The control is used to boost low
and/or high frequency information to overcome road noise.The remote overrides the Punch EQ rear
channel control on the amplifier when connected.
NOTE: Previous Punch Bass and Para-Punch remotes will not work with these amplifiers.
7. Punch EQ A Gyrator based Punch EQ that eliminates frequency shift with boost.This works along
with the crossover switch on the amplifier.When set to Low-Pass (LP) operation,this is a variable Bass
Boost. When set to High-Pass (HP) operation,this is a variable Mid-Bass and Treble Boost. When set to
All Pass (AP) operation,both the Bass and Treble frequencies are boosted.
8. Crossover Switch Selectable switch for High-Pass (HP),All Pass (AP),or Low-Pass (LP) operation.
9. Variable Crossover Is a built-in 12dB/octave Butterworth filter with a crossover point variable
from 50Hz to 500Hz.
10. Gain Control The input gain control is preset to match the output of most source units.It can be
adjusted to match output levels from a variety of source units.
11. RCA Input Jacks The industry standard RCA jacks provide an easy connection for signal level input.
They are nickel-plated to resist the signal degradation caused by corrosion.
12. 2/4 Channel Switch – Setting this switch to the 2CH.position, switches the inputs to a 2-channel
mode, allowing connection to only the front inputs with a 4-channel output.
13. REM Terminal The heavy duty,nickel-plated captive c-clamp wire connector will accept wire sizes
from 12 AWG to 24 AWG.This terminal is used to remotely turn-on and turn-off the amplifier when
+12V DC is applied.
14. Power Terminals The power and ground are nickel-plated captive c-clamp wire connectors and will
accommodate up to 4 AWG wire.
8
INSTALLATION
2-Channel Wiring
Mono
Bridged
RCA Inputs connect to FRONT inputs only.
2/4 CH. SWITCH up position to set to 2 CH.
Gain (Front & Rear) - is set independently to suit
application.
Crossover (Front & Rear) - is set independently to
suit application.
9
INSTALLATION
Stereo Bridged
2/4 CH. SWITCH down position to set to 4 CH.
Gain (Front & Rear) - is set independently to suit application.
Crossover (Front & Rear) - is set independently to
suit application.
4-Channel Wiring


Specyfikacje produktu

Marka: Rockford Fosgate
Kategoria: radio samochodowe
Model: P400-4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Rockford Fosgate P400-4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje radio samochodowe Rockford Fosgate

Instrukcje radio samochodowe

Najnowsze instrukcje dla radio samochodowe