Instrukcja obsługi Dual XDC100BT


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dual XDC100BT (24 stron) w kategorii radio samochodowe. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/24
INSTALLATION/OWNER'S MANUAL
AM/FM/CD/USB Receiver
XDC100BT
2
XDC100BT INSTALLATION
Preparation
Please read entire manual before installation.
Before You Start
Disconnect negative battery terminal. Consult a qualified technician for
instructions.
Avoid installing the unit where it would be subject to high temperatures, such
as from direct sunlight, or where it would be subject to dust, dirt or excessive
vibration.
Getting Started
Remove trim ring from unit.
Remove 2 transit screws located on top of the unit.
Insert the supplied keys into the slots as shown, and slide the unit out of the
mounting sleeve.
Install mounting sleeve into opening, bending tabs to secure.
Connect wiring harness and antenna. Consult a qualified technician if you are
unsure.
Certain vehicles may require an installation kit and/or wiring
harness adapter (sold separately).
Test for correct operation and slide into mounting sleeve to secure.
TYPICAL FRONT-LOAD
DIN MOUNTING METHOD
3
XDC100BT INSTALLATION
Wiring Diagram
FUSE
When replacing the
fuse, make sure new
fuse is the correct type
and amperage. Using
an incorrect fuse could
damage the radio.
The
10 amp ATC fuse
located beside the wiring
connector.
unit uses one
Antenna
Connector
Remote Turn On
Connect to amplifier or power
antenna. Insulate wi if not used.re


Specyfikacje produktu

Marka: Dual
Kategoria: radio samochodowe
Model: XDC100BT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dual XDC100BT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje radio samochodowe Dual

Instrukcje radio samochodowe

Najnowsze instrukcje dla radio samochodowe