Instrukcja obsługi Roccat Pure SEL

Roccat mysz Pure SEL

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Roccat Pure SEL (2 stron) w kategorii mysz. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

PURE SEL

STANDARD

1 = Left click

2 = Right click

3 = Middle mouse button

4 = Scroll up

5 = Scroll down

6 = Browser forward

7 = Browser backward

8 = DPI cycle

SYST EM REQUIREMENTS

® 7 and above (software suppor t)Windows

USB 2.0 port or higher

Internet connection (for driver installation)

Should you need assistance …

Our support team is ready to help you with any technical questions.

Just send an e-mail to support@roccat.com or visit our website at:

WW W.ROCCAT.COM /SUPPOR T

TECH SPECS PURE SEL

PixArt PAW3318 8K DPI optical sensor

200 IPS (5.1m/s) maximum t racking speed

30g maximum accelerat ion

Default DPI steps: 400, 800 (default), 1200, 1600, 3200

100 0Hz polling rat e

Lif t-o distance: 1mm, 2mm customizable

Mechanical Switch, 20 million click life cycle

Weight: 49 gr ams

PACKAGE CONTAINS

ROCCAT

Pure SEL

Quick-Star t guide

DPI INDICATION

DEFAULT BUTTON ASSIGNMENT

(no driver installed)

Once the mouse is plugged in, pressing the DPI button will

change the DPI and show a corresponding color on the

indicator for 2 seconds. The color is shown as below:

The number of active DPI stages on your mouse can be changed

in the driver software, along with the DPI value for each stage.

1st stage Red (default DPI value: 400)

2nd stage Green (default DPI value: 800)

3rd stage

5th stage

Cyan (default DPI value: 1200)

Pink (default DPI value: 3200)

4th stage Blue (default DPI value: 1600)

QUICK START

GUIDE

ANLEITUNG

INSTRUCTIONS

1. Entferne die blaue Plastik-Schutzfolie an den Standfüßen der Maus.

2. Verbinde den USB-Stecker mit einem beliebigen freien USB Anschluss

an deinem PC oder Laptop.

3. Besuche www.roccat.com/downloads zum Herunterladen des

neuesten Treibers.

4. Schließe die Installation ab und erhalte Zugri auf alle Software-

Funktionen und Einstellungen.

1. Remove the blue protective plastic from the mouse feet.

2. Plug the USB connector into any free USB port on your PC or laptop.

3. Navigate to www.roccat.com/downloads and download the latest driver.

4. Complete the installation to get access to all software features and setup.

1. 取下鼠标垫脚上的蓝色塑料保护壳。

2. 将USB连接器插到PC或笔记本电脑上任意一个空出的USB端口。

3. 导航到www.roccat.com/downloads后下载最新版的驱动程序。

4. 完成安装即可获取所有软件功能与设置。

说明

说明说明

1. 從滑鼠墊片移除藍色保護膜。

2. 將連接器插在或筆記型電腦上任一個空出的 USB PC USB 連接埠。

3. 導覽至 www.roccat.com/downloads 後下載最新版的驅動程式。

4. 完成安裝後即可取得所有軟體功能與設定。

1. น�เทปพล�สต ิกกันรอยส ีฟ้�ออกจ�กส่วนล่�งของเม�ส์

2. เส ียบส�ยUSBเข้�กับพอร์ตUSBพอร์ตใดก็ต�มท ี่ว�งอยู่บนPCหร ือแล็ปท็อป

ของค ุณ

3. ไปท ี่www.roccat.com/downloadsแล้วด�วน์โหลดไดรเวอร์เวอร์ช ันล่�สุดได้

4. ด�เน ินก�รต ิดตั ้งให้เสร ็จส ิ ้นเพ ื่อให้ส�ม�รถเข้�ถ ึงคุณสมบัต ิและก�รตั ้งค่�

ซอฟต์แวร์ทุกร�ยก�รได้

1. Tháo miếng nhựa bảo vệ màu xanh khỏi đế chuột.

2. Cắm đầu nối USB vào bất kỳ cổng USB trống nào trên PC hoặc

laptop của bạn.

3. Chuyển hướng đến www.roccat.com/downloads và tải xuống

trình điều khiển mới nhất.

4. Hoàn tất quá trình cài đặt để nhận được quyền truy cập vào tất cả

các tính năng và thiết lập phần mềm.

使用說明

使用說明使用說明

ค�แนะน�

HƯỚNG DẪN

1. マウスフィートから青い保護プラスチックを外します。

2. USB コネクタを、ご利用中のの空いている PC USB ポートに接続します。

3. www.roccat.com/downloads にアクセスすることで、最新のドライバーをダウンロー

ドできます。

4. すべてのソフトウェア機能とセットアップを使用できるよう、インストールを完了します。

使用説明

1. 󻝤󼑌󼁀󾘥󽋘󽁔󼍬󻺸󾘥󽂨󻔜󻹥󾘥󻪐󽏔󾘥󽊨󻔘󼁀󽂍󼓠󾘥󼖸󺨌󽌅󻁤󻂀

2. USB󼲀󺻁󼻌󻜘PC󻎬󻀰󾘥󺼔󽁔󻬝󼓴󾘥󻯠󼍐󾘥󼔤󻀰 󽆈󽁔󼍬󾘥󼎌󺩌󽌅󻁤󻂀USB

3. www.roccat.com/downloads󻗸󾘥󼔐󻅵󽋴󼎈󾘥󼫸󼁼󾘥󻨠󼖠󼓴󾘥󻉸󻔘󼔐󻨠󻜘󾘥󻂀󼑐󻗸󻉸󽋴󻻔󼐰

4. 󻻀󼯴󻜘󾘥󼏠󻙨󽋴󻠐󾘥󻡄󻉼󾘥󻼨󽊠󽁔󼒄󼍐󾘥󺯌󻁁󾘥󻦫󾘥󻻀󼖱󼓠󾘥󼔐󼑅󽋼󾘥󻾴󾘥󼔤󼁑󻁤󻂀

지시사항

지시사항지시사항

1. Retirez le plastique de protection bleu des patins de la souris.

2. Branchez l’embout USB dans n’importe quel port USB de votre PC.

3. Téléchargez le tout dernier pilote sur www.roccat.com/downloads.

4. Terminez l’installation pour accéder à toutes les fonctionnalités du logiciel.

INSTRUCTIONS

W W W . R O C C A T . C O M

標準

1 = 按一下滑鼠左鍵

2 = 按一下滑鼠右鍵

3 = 鼠標中鍵

4 = 向上捲動

5 = 向下捲動

6 = 瀏覽器下一頁

7 = 瀏覽器上一頁

8 = DPI 週期

ID005 | Revision: E

R3D362

RoHS

R-R-VTB-PSEL

BSMI 限用物質聲明表查詢,請上 https://bsmi.roccat.com/

VOYETRA TURTLE BEACH, INC. | 44 SOUTH BROADWAY, 4TH FLOOR,

WHITE PLAINS, NY 10601, USA

be trademarks or registered trademarks and are the property of their respective owners. Information

contained herein is subject to change without notice. Voyetra Turtle Beach, Inc shall not be made liable

for any errors that may appear in this manual. This publication or parts of it may not be reproduced

without the express consent of the publisher. ROCCAT® is a Turtle Beach Brand.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are

entitled to a replacement or refund for a major failure and for compensation for anyother reasonably

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail

to be of acceptable quality and the failure does not amount to a major failure.

本表格依据的规定编制。SJ / T 11364

О：表示该有毒有害物质在该部件所有均质材料中的含量均在规定的限量要求以下。GB / T 26572

Х：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出规定的限量要求。GB / T 26572

有害物质名称及含量标识格式

产品中有害物质名称及含量

部件名称    有害物质

  铅(Pb) 汞(Hg) 镉(Cd)六价铬(Cr +6)多溴联苯(PBB)

多溴二苯醚(PBDE)

印刷電路板組件

塑膠部件/外殼

金屬部件/螺絲

連接線及組件

Hereby, Voyetra Turtle Beach

Corp.

declares that this product is in compliance with t he

essent ial r equirement s and ot her relevant pr ovisions of Directive 2014/30/EU.

The full Declaration of Conformity can be requested via following:

Company: Voyetra Turtle Beach, Inc.

Address:

44 South Broadway, 4th Floor, White Plains, NY 10601, USA

E-Mail: support @rocca t.com

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference and (2) this device must accept any

interference received, including interference that may cause undesired operation

FCC CAUTION:

GENERAL SAFE TY GUIDELINES AND INTENDED USE

1. Do not open or modify the product.

2. Not approved changes or modiﬁcations may void the operation

authority and/or warranty.

3. In case of trouble or doubt, contact us immediately.

4. Keep the product away from ﬁre/water/humidity/temperature

extremes.

5. Only use as intended with a compliant PC and connector part.

6. Improper or incorrect use of the product or use of the product for

purposes not recommended by the manufacturer void the liability and/

or warranty.

7. Don‘t look into the light beam on bottom of the mouse.

DRIVERLESS SETUP

To enter conﬁg mode: hold down buttons 1, 2, 3 and 8 (default left click, right

click, middle mouse, and DPI) for 3 seconds. The LED will show a sequence of

white, red, green, then blue.

To exit conﬁg mode: press buttons 1, 2, 3 and 8 at the same time once.

The LED will show a sequence of blue, green, red then white.

But tons 6 & 7 (browser for ward & browser backward):

Change polling r ate. The L ED will blink twice in the color of the selected

polling rat e:

125Hz – Blue

250Hz – Green

500Hz – Yellow

1000Hz – White (def ault )

But ton 3 (middle mouse but ton): Swap between 1mm and 2mm lif t-

o dis tance. The LED will blink t wice in the color o f the selected lif t-o

distanc e:

1mm – Red (def ault )

2mm – Purple

While holding but ton 1 (lef t mouse but ton), mouse wheel up/down:

Change debounce value. The LED will blink twice in the color of the

selected lift-o distance:

2ms – Orange

5ms – Purple (default)

10ms – Cyan

While holding button 1 (left mouse but ton), buttons 6 & 7

(browser forward & browser backward):

Change LED brightness (steps of 10%). The LED will immediately change.

While holding but ton 2 (right mouse butt on), mouse wheel up/down:

Change LED Color (16 preset colors). The LED will immediately change.

(This will not aect Wave mode).

While holding button 2 (right mouse butt on), but tons 6 & 7

(browser forward & browser backward):

Change LED mode (choose from Static, Wave, Heartbeat, Breathing, and

Blinking). The LED will immediately change.

Join the communi ty

Become a ROCCAT member and register your product at:

www.roccat.com/support/register-your-product

Please use your product’s serial number

(located on the bottom label)

Service & support

Easy access to

customer support

Authenticity check

Make sure you

own an original

Exclusive deals

Opt-in for special

oers and downloads

如需協助...

我們的支援團隊將會協助您處理任何技術問題。

請傳送電子郵件至 suppor t @r occat. com 或造訪我們的網站：

WWW.ROCCAT.COM/SUPPORT

系統需求

Windows® 7 ( )及更高版本軟件支持

USB 2.0 連接埠或更高版本

網路連線 (為了安裝驅動程式)

PURE SEL 技術規格

PixAr t PAW3318 8K DPI 光學感應器

200 IPS (5.1m/s) 最大追蹤速度

30g 最大加速度

預設 DPI 段位：400、800 ( )預設、1200、1600、3200

1,000Hz 輪詢率

抬起偵測距離：1mm、2mm 可自訂

機械式鍵軸，生命週期達 20 億次擊鍵數

重量：49 克

Specyfikacje produktu

Marka:	Roccat
Kategoria:	mysz
Model:	Pure SEL

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Roccat Pure SEL, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje mysz Roccat

Roccat Kain 202 Instrukcja

1 Października 2024

Roccat Pure Air Instrukcja

30 Września 2024

Roccat Pure SEL Instrukcja

30 Września 2024

Roccat Kain 100 AIMO Instrukcja

21 Września 2024

Roccat Kone Pro Air Instrukcja

20 Września 2024

Roccat Kone Pure SE Instrukcja

14 Września 2024

Roccat Burst Core Instrukcja

12 Września 2024

Roccat Lua Instrukcja

5 Września 2024

Roccat Kone EMP Instrukcja

4 Września 2024

Roccat Kone Pure Military Instrukcja

4 Września 2024

Instrukcje mysz

Najnowsze instrukcje dla mysz

Hama Canosa Instrukcja

15 Października 2024

Razer Naga Hex Instrukcja

14 Października 2024

Razer Abyssus Elite Instrukcja

12 Października 2024

Targus PAWM10U-01 Instrukcja

10 Października 2024

Balam Rush Speeder Perform GM969 Instrukcja

9 Października 2024

Urban Factory ONLEE Pro Dual Instrukcja

9 Października 2024

Goldtouch Bluetooth KOV-GTM-B Instrukcja

9 Października 2024

Krom Klever Instrukcja

9 Października 2024

Vorago MO-305-SLIM Instrukcja

9 Października 2024

Vorago MO-415 Instrukcja

9 Października 2024