Instrukcja obsługi Robbe Futaba FF-10
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Robbe Futaba FF-10 (119 stron) w kategorii Sterowanie radiowe. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/119
10CAP/10CHP/10CP
10-CHANNEL RADIO CONTROL SYSTEM
INSTRUCTION MANUAL
Technical updates and additional programming examples available at: http://www.futaba-rc.com/faq
Entire Contents ©Copyright 2008 1M23N21002
2
TABLE OF CONTENTS
INTRODUCTION ........................................................... 3
Additional Technical Help, Support and Service ........ 3
Application, Export and Modifi cation ........................ 4
Meaning of Special Markings ..................................... 5
Safety Precautions (do not operate without reading) .. 5
Introduction to the 10C ............................................... 7
Contents and Technical Specifi cations ........................ 9
Accessories ............................................................... 10
Transmitter Controls &
Switch Identifi cation/Assignments ............................. 11
Charging the Ni-Cd Batteries ................................... 15
Stick Adjustments ..................................................... 16
Adjusting display contrast ........................................ 16
Changing mode .......................................................... 17
Power Down mode (TM10 module) .......................... 17
CAMPac initializing and data conversion (9C/9CS to 10C)
17
Radio Installation & Range Checking ...................... 18
Aircraft Frequencies ................................................. 22
Transmitter Displays and Buttons ............................. 23
Warning and Error Displays ..................................... 24
AIRPLANE (ACRO) FUNCTIONS ................................ 25
Map of Functions ........................................................ 26
Quick Guide to Setting up a 4-channel Airplane ...... 27
ACRO BASIC MENU FUNCTIONS ................................ 30
MODEL Submenu: MODEL SELECT, COPY, NAME .......... 30
PARAMETER Submenu: RESET, TYPE, MODUL, ATL, AILE-2,
CONTRAST, BACK-LIGHT, HOME-DISP, USER NAME, LOGIC SW
33
Servo REVERSE ........................................................... 38
END POINT .................................................................. 39
Idle Management: IDLE DOWN and THR-CUT .............. 40
Dual/Triple Rates and Exponential (D/R, EXP) .......... 42
TIMER Submenu .......................................................... 45
Auxiliary Channel assignments and CH9 reverse (AUX-CH)
. 46
TRAINER ..................................................................... 47
TRIM and SUB-TRIM ................................................... 48
SERVO Display ........................................................... 49
Fail Safe and Battery FailSafe (F/S) ......................... 50
ACRO ADVANCE MENU FUNCTIONS ........................... 51
Wing types ................................................................ 51
FLAPERON ................................................................... 52
FLAP TRIM .................................................................. 53
Aileron Differential (AILE-DIFF) ................................. 54
Using a 5-channel receiver: AILE-2 ............................ 55
ELEVON (see tail types) ............................................... 56
Tail types ................................................................... 56
ELEVON ....................................................................... 56
Twin Elevator Servos (AILEVATOR) ............................ 57
V-TAIL ......................................................................... 58
SNAP ROLL .................................................................. 59
Mixes: defi nitions and types ..................................... 61
ELEV-FLAP .................................................................... 62
AIRBRAKE/BUTTERFLY (crow) ..................................... 63
THROTTLE-NEEDLE ........................................................ 65
THROTTLE DELAY ......................................................... 66
THROTTLE CURVE ........................................................ 67
Linear, Prog. mixes 1-4 ............................................. 68
Curve, Prog. mixes 5-8 ............................................. 71
GYA gyro mixing (GYRO SENSE) ............................... 73
Other Equipment ....................................................... 74
GLIDER (GLID(1A+1F)/
(2A+1F)/(2A+2F)) FUNCTIONS . 75
Table of contents ........................................................ 75
Getting Started with a Basic 4-CH Glider ................ 76
GLIDER-SPECIFIC BASIC MENU FUNCTIONS ........ 78
Model type (PARAMETER submenu) ........................... 78
MOTOR CUT ................................................................ 79
GLIDER-SPECIFIC ADVANCE MENU FUNCTIONS
..... 80
AILE/RUDD .................................................................. 81
AILE-FLAP (GLID(2A+2F) only) .................................... 82
SPOILER MIX ............................................................... 83
OFFSETs (Additional fl ight conditions) ...................... 84
START DELAY (GLID(1A+1F) only) ................................. 85
CAMBER MIX ............................................................... 85
CAMBER FLAP .............................................................. 86
BUTTERFLY ................................................................... 87
Channel 3’s function selection (CONDITION/FUNCTION)
88
HELICOPTER FUNCTIONS .......................................... 89
Table of contents and reference info for helicopters . 89
Getting Started with a Basic Helicopter ................... 90
HELI-SPECIFIC BASIC MENU FUNCTIONS ................ 93
MODEL TYPE (PARAMETERS submenu) ........................ 93
SWASH AFR (swashplate surface direction and travel
correction) (not in H-1) .............................................. 95
THROTTLE MIX ............................................................ 96
Setting up the Normal Flight Condition ................... 97
THR-CUT (specialized settings for helicopter specifi c
models) ..................................................................... 98
HELI-SPECIFIC ADVANCE MENU FUNCTIONS ........... 99
THROTTLE HOLD .......................................................... 99
THR-CURVE, PIT-CURVE and REVO ............................. 100
Idle-ups ................................................................... 101
Trims/offset ............................................................. 102
Delay ....................................................................... 103
Hovering setups ...................................................... 104
High/low pitch ........................................................ 105
Gyros and governors ............................................... 106
Glossary ........................................................................ 110
Note that in the text of this manual, beginning at this
point, any time we are using a feature’s specialized name
or abbreviation, as seen on the screen of the 10C, that
name, feature, or abbreviation will be exactly as seen on
the radio’s screen, including capitalization and shown in
a DIFFERENT TYPE STYLE for clarity. Any time we mention
a specific control on the radio itself, such as moving
SWITCH A, KNOB VR(B) THROTTLE STICK, or the ,
those words will be displayed as they are here.
3
INTRODUCTION
Thank you for purchasing a Futaba® 10C series digital proportional R/C system (FASST-2.4GHz* or PCM1024 system).
This system is extremely versatile and may be used by beginners and pros alike. In order for you to make the best use of
your system and to fl y safely, please read this manual carefully. If you have any diffi culties while using your system, please
consult the manual, our online Frequently Asked Questions (on the web pages referenced below), your hobby dealer, or the
Futaba Service Center.
*FASST: Futaba Advanced Spread Spectrum Technology
Owner’s Manual and Additional Technical Help
This manual has been carefully written to be as helpful to you, the new owner, as possible. There are many pages of setup
procedures and examples. However, it need not be your sole resource of setup guidelines for your 10C. For example, pages
22-24 include setup instructions for a basic 4-channel airplane. The Frequently Asked Questions web page referenced
below includes this type of step-by-step setup instructions for a variety of other model types, including multi-engine,
complex gear installation, 7-servo aerobatic models, 140 degree CCPM, etc.
Due to unforeseen changes in production procedures, the information contained in this manual is subject to change without
notice.
Support and Service: It is recommended to have your Futaba equipment serviced annually during your hobby’s “off
season” to ensure safe operation.
IN NORTH AMERICA
Please feel free to contact the Futaba Service Center for assistance in operation, use and programming. Please be sure to
regularly visit the 10C Frequently Asked Questions web site at www.futaba-rc.com\faq\. This page includes extensive
programming, use, set up and safety information on the 10C radio system and is updated regularly. Any technical
updates and US manual corrections will be available on this web page. If you do not fi nd the answers to your questions
there, please see the end of our F.A.Q. area for information on contacting us via email for the most rapid and convenient
response.
Don’t have Internet access? Internet access is available at no charge at most public libraries, schools, and other public
resources. We fi nd internet support to be a fabulous reference for many modelers as items can be printed and saved for
future reference, and can be accessed at any hour of the day, night, weekend or holiday. If you do not wish to access the
internet for information, however, don’t worry. Our support teams are available Monday through Friday 8-5 Central time
to assist you.
FOR SERVICE ONLY:
Futaba Service Center
3002 N. Apollo Drive, Suite 1
Champaign, IL 61822
Phone: 217-398-0007
www.hobbyservices.com
FOR SUPPORT :
(PROGRAMMING AND USER QUESTIONS)
Please start here for answers to most questions:
www.futaba-rc.com\faq\
FACSIMILE: 217-398-7721
PHONE: 217-398-8970 option 4
OUTSIDE NORTH AMERICA
Please contact your Futaba importer in your region of the world to assist you with any questions, problems or service
needs.
Please recognize that all information in this manual, and all support availability, is based upon the systems sold in North
America only. Products purchased elsewhere may vary. Always contact your region’s support center for assistance.
Specyfikacje produktu
| Marka: | Robbe Futaba |
| Kategoria: | Sterowanie radiowe |
| Model: | FF-10 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Robbe Futaba FF-10, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Sterowanie radiowe Robbe Futaba
26 Września 2024
24 Września 2024
23 Września 2024
15 Września 2024
8 Września 2024
5 Września 2024
4 Września 2024
15 Sierpnia 2024
9 Sierpnia 2024
Instrukcje Sterowanie radiowe
- Sterowanie radiowe Spektrum
- Sterowanie radiowe Reely
- Sterowanie radiowe Futaba
- Sterowanie radiowe Saturn
- Sterowanie radiowe Graupner
- Sterowanie radiowe Multiplex
- Sterowanie radiowe Hitec
- Sterowanie radiowe Robbe
- Sterowanie radiowe JRpropo
- Sterowanie radiowe Sanwa
- Sterowanie radiowe Rush
Najnowsze instrukcje dla Sterowanie radiowe
14 Października 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
26 Września 2024
26 Września 2024