Instrukcja obsługi Roadworx Speaker Stand 2
Roadworx
obsługa głośników
Speaker Stand 2
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Roadworx Speaker Stand 2 (1 stron) w kategorii obsługa głośników. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/1
Intended use
This device is intended to be used for secure positioning of speaker
boxes. Any other use or use under other operating conditions is con-
sidered to be improper and may result in personal injury or property
damage. No liability will be assumed for damages resulting from im-
proper use.
Danger for Children
Ensure that plastic bags, packaging, etc. are properly disposed
of and are not in the reach of babies and young children. Chok-
ing hazard! Ensure that children do not detach any small parts
from the product. They could swallow the pieces and choke! Never let
children use electrical devices unattended.
Disposal of the packaging material
For the transport and protective packaging, environmentally
friendly materials have been chosen that can be supplied to
normal recycling. Ensure that plastic bags, packaging, etc. are
properly disposed of. Do not just dispose these materials with your nor-
mal household waste, but make sure that they are fed to a recovery.
Please follow the notes and markings on the packaging.
Possible staining
The plasticiser contained in the rubber feet of this product may pos-
sibly react with the coating of your parquet, linoleum, laminate or
PVC oor and after some time cause permanent dark stains. In case
of doubt, do not put the rubber feet directly on the oor, but use felt-
pad oor protectors or a carpet.
DocID: 442423_06.05.2021
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • Germany • www.thomann.de
EN
Speaker stand 2
luminium tube tripod speaker stand
ith air cushioning
D38–OD35
ith knurled screw and safety cotter pin
eight: 13002000mm
Specyfikacje produktu
Marka: | Roadworx |
Kategoria: | obsługa głośników |
Model: | Speaker Stand 2 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Roadworx Speaker Stand 2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje obsługa głośników Roadworx
30 Września 2024
Instrukcje obsługa głośników
- obsługa głośników Pioneer
- obsługa głośników Philips
- obsługa głośników Bose
- obsługa głośników Crestron
- obsługa głośników Nedis
- obsługa głośników Cambridge
- obsługa głośników Sanus
- obsługa głośników My Wall
- obsługa głośników Dynaudio
- obsługa głośników Renkforce
- obsługa głośników Pro-Ject
- obsługa głośników Neumann
- obsługa głośników One For All
- obsługa głośników Pyle
- obsługa głośników Sennheiser
- obsługa głośników Peerless-AV
- obsługa głośników Heckler Design
- obsługa głośników Bowers & Wilkins
- obsługa głośników Vonyx
- obsługa głośników Chief
- obsługa głośników Dali
- obsługa głośników Vogel's
- obsługa głośników Omnitronic
- obsługa głośników Hama
- obsługa głośników Gravity
- obsługa głośników Arcam
- obsługa głośników Kanto
- obsługa głośników Tannoy
- obsługa głośników Electro-Voice
- obsługa głośników Audizio
- obsługa głośników Best Buy
- obsługa głośników K&M
- obsługa głośników Techly
- obsługa głośników Valcom
- obsługa głośników Peerless
- obsługa głośników Adam Hall
- obsługa głośników Bell'O
- obsługa głośników Extron
- obsługa głośników Triangle
- obsługa głośników Norstone
- obsługa głośników Xtech
Najnowsze instrukcje dla obsługa głośników
9 Października 2024
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024