Instrukcja obsługi Rio Scanning Laser X60

Rio urządzenie do usuwania włosów Scanning Laser X60

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Rio Scanning Laser X60 (2 stron) w kategorii urządzenie do usuwania włosów. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

LAHC5

CLASS 1 PRODUCT

CONTAINING

CLASS 3B LASER

808nm

wavelength

Wearing laser

safety goggles is

unnecessary as

the product has

been designed

with inbuilt safety

features.

PATENTS PENDING

This product MUST be used responsibly.

Please read these Instructions carefully

before use.

Refer to your Information Guide for:

• WARNINGS

• SECURITYBUTTONSEQUENCE

• HOWDOLASERSWORK?

• SUITABLESKINTYPES

• PATCHTEST

• HAIRGROWTHCYCLE

• WHYISASERIESOFTREATMENTS

REQUIRED?

• YOURQUESTIONSANSWERED

• TROUBLESHOOTING

™

SALON ASERL

SCANNING HAIR REMOVER x60

W A R N I N G S

• Readallinstructionsthoroughlyandretainforfuturereference.

• Not suitableforAfro-Caribbean,black skincomplexionsor forGreyHair.

See“SuitableSkinTypes”inInformationGuide.

• Laserhairremovalshouldnotcausediscomfort,youmayfeelindividualhairs

beingtreated,whichislikeamildpinprick,andaslightwarmingofthearea.

Ifyoufeelanydiscomfortorsorenessthesettingmaybetoohigh.

• Inbuiltsafetyfeaturesprotecttheeyebeingexposedtothelaser,however,

neveraimtheWandatorneareyes.

• DoNOTusenearflammablematerials.

• Keeptheproductoutofreachofchildrenandpets.

• ReflectionHazard:Pleaseremovealljewelleryinthevicinityofthetreatment

areabeforeuse.

• Whennotinuse,storethekeyresponsiblyinasafeplaceawayfromchildren.

• Donottreatthesamehairrepeatedlyinanyonesession.

• Donotuseafterdrinkingalcoholorifyouarefeelingunwellorfatigued.

• Donottreatthefollowingareas:tattoos,permanentmake-up,pimples,warts,

haironblackspotsormoles,darkfreckles,skindisease,birthmarks,burns,

lips,nipples, genitaloranalareas,eczema,eyelashes,eyebrows, nearthe

eyes,nasalorearhair.

• Thisis asensitivelaserscanningproduct.Careshould betakento avoid

damagetothemechanismintheWand.

• Thisapplianceisnotintendedforusebypersons with reducedphysical,

sensoryormentalcapabilities,orlackofexperienceandknowledge,unless

they have been given supervision or instruction concerning use of the

appliancebyapersonresponsiblefortheirsafety.

PRECAUTIONS

• DoNOTdismantleorrepair.Ifyouhaveanyproblemsusingtheproduct,

contactourCustomerCareDepartment.

• Misuseoftheunitcancauseharm.

• DoNOToverrideanysafetyfeaturesoropentheunitorwand.

• OnlyusethisproductwiththeMainsAdaptersupplied.

• KeepWandawayfromstrongelectromagneticfieldsandmagnetsduringuse.

PATCHTEST

IMPORTANT:24hoursbeforetreatmentitisveryimportanttodoapatchtest.

Thepatchtestwillconfirmthemaximumpowerlevelforyourskintype.Eacharea

tobetreatedmustbecheckedasskincolourcanvary.Pleaserefertothe‘PATCH

TEST’sectionintheInformationGuideandontheDVDforinstructions.

Aslightrednessmayoccur,butnotalways,withinanhouroftreatment.This

localisedrednessiscausedbythedestructionofthehairfolliclesandisquite

normal.However,ifanyrednessremainsafter24hoursthiswouldindicatethe

powerlevelselectedwastoohighforyourskintype.

GETTINGSTA RTED

Please ensure you read the Information Guide and understand the

‘Warnings’ and ‘Product Safety’ sections before proceeding.

• Shavetheareatobetreated.Thisensuresthatthelasergoesdirectly

tothehairrootandavoidshairburningonthesurface.

• Removealljewelleryinthevicinityofthetreatmentarea.

• Pleaseensureyouhavepatchtestedtheareatobetreated24hours

prior to treatment.

STEP 1

ConnectMainsAdapterintotheDCPowerSocket at

thebackoftheunitandplugintotheMains.

STEP2

Unlock with Key to turn on. The light around the

Keyswitchwillflashgreen.

STEP 3

Enterthe“SECURITYBUTTONSEQUENCE”.

You will find the Security Button Sequence in the

Information Guide.

ThegreenlightaroundtheKeyswitchwillfullyilluminate.

Thelightsaroundthex60SCAN,x20SCANandSINGLE

buttonswillflashbluereadyforselection.Thebottom

PowerLevelIndicatorlightwillilluminate.

STEP4

Usethe+/-buttonstoselectthecorrectpowerlevel

foryourskintype.Refertothe‘PatchTest’sectionof

theInformationGuideforskintypes.

Each time the power setting is adjusted, you will

need to reselect x60 SCAN, x20 SCAN or SINGLE

modetocontinue.

Note: If no buttonsare pressedafter20 minutestheUnit will enterenergy

savingmode. The orangelight will flashand power level1will remainon.

TorestartturnkeyoffandbackonagainandstartatStep3.

ADDITIONALINFORMATION

STEP 8

Turn the Keyswitch anticlockwise to lock the unit.

RemovetheKeytoasafeplaceawayfromchildren.

Note: Ifyouexperienceunexpectedbehaviourofthisproductthenitispossible

someexternalelectromagneticinterferenceisresponsiblee.g.electricmotors/

loudspeakersetc. Youshould removethis sourceandrestarttheproductto

restorefulloperation.Atnotimewillthelaserfireunintentionally.

‘SINGLE’HAIRTREATM ENT

Youcanopttotreatsinglehairsusing

theSINGLEmode.

Press the ‘SINGLE’ button once.

TheSINGLEbuttonwillilluminateblue.

The orange light on the Wand

willilluminate.

FollowthesameprocedureforSCANtreatmentfromStep6,butthistime

pressing the SINGLE button.

In SINGLEmode,thebluelight aroundthe SINGLE

buttonwillflash.

Referto‘TreatmentArea’section,SINGLEmode.

“ SECURITY

BUTTON

SEQUENCE”

TREATM ENTAREA

Asaguidetothetreatmentarea,asmallindentationmarkwillbeleftby

pressingthe Wanddown ontheskin.Inx60SCANmode,overlapping

theindentationmarkslightlywhenmovingtheWandineachdirectionwill

ensureeffectivecoverage.Inx20SCANmode,overlaptheindentation

markbyhalf.

SCANmodessequentiallytargetsinglehairsineachtreatment.

SINGLEmodeisfortreatingindividualhairs.Thetreatmentareaisinthe

centreoftheindentationguideandmeasures1mmx1mm.

‘SCAN’HAIRTREATMENT

STEP 5

Press the x60 SCAN button once. The

blue light around the button will fully

illuminate.Theorangelightonthewand

willilluminate.

Alternatively,pressthex20SCANbuttononce.

STEP6

Placethewandontheskinovertheareayouwishtotreat,

ensuringtheTouchPinsareincontactwiththeskin.

TheorangelightwillturnOFFandthewhite‘ready’light

willturnON.

The blue lightsaroundtheSCANbuttonwill rotate to

indicatetreatmentisreadytostart.

STEP 7

Press and HOLD theLaser Button on the top of the

wandtostartlasertreatment.

The white light will flash on and off to indicate laser

treatmentisinprogressandtheunitwillbeeprepeatedly

(thiscanbemuted).Youwillnotbeabletoseethelaser.

Youmay feel individualhairs being treated, which is

likeamildpinprick,andaslightwarmingofthearea

beingtreated.

Whenthelaser treatmentceases,theorange lightwill

comebackon.Youcannowmoveontothenextareaof

hairstobetreated.

Whenmovingthewandtothenextareaofhairstobe

treatedtheTouchPinsmust be removedbrieflyfrom

theskin.

Refertoscanmodesin‘treatmentarea’section.

IMPORTANTNOTES - please read carefully

• DoNOTmovethewandduringtreatment.Youmaynoticethewandbecomes

warmduringusethisisquitenormal.

• IfcontactislostbetweentheTouchPinsandskinduringtreatment,thewand’s

orangelightwillcomeon.Treatmentwillresumewhencontactismadeagain.

• Foryoursafety,ifthewandisnotpositionedcorrectlyontheskinsurfacefor

treatment,thewhiteandorangelightswillflashalternatelyandoperationof

thelaserwillbedisabled.

• Sometimesyou cansmell faint burningor even see a very, small line of

smokeasthehairistreated.

• Successfullytreatedhairsdonotalways falloutimmediately,butareshed

over time as they are released from the hair follicle, light rubbing can

encouragethis.

• Youmayfeela‘pinprick’sensationduringtreatment.Anylocalisedrednessafter

treatmentiscausedbythedestructionofthehairfolliclesandisquitenormal.If

anyrednessremainsafter24hoursthiswouldindicatethepowerlevelselected

wastoohighforyourskintype.Pleaserefertothe‘PatchTest’sectioninthe

InformationGuide.Anylongerlastingrednesswillalsodisappear.

L A S E R  H AI R T R EA TM E N T

PresstheMUTEbuttononthebackoftheUnittoturn

offtheBeepnoises.Pressagaintoturnbackon.

Note: Thisdoesn’tturnoffwarningbleeps.

resettingafter‘lockout’

If you experience a ‘lockout’ as indicated by

repeatedflashingofanyofthebluepowerlights,

simplyresetbyturning theunit offusing thekey,

waiting5secondsandturningtheunitonagain.

cleaninglaseraperture

Periodically check whether there are any smoke

deposits on the Laser Aperture. A build up of

depositswillaffecttheefficiencyofthelaser.Ifyou

noticeanydeposits,switchtheunitOFFandunplug

themainsadapter.Thensimplycleanwithalintfree

clothorcottonbud,ensuringnofibresareleftinthe

LaserAperture.

x60 SCANmode

x20 modeSCAN

SINGLEmode

Rio,Dezac,SalonLaserScanningHairRemoverx60andLaserSafeTechnologyaretrademarksofTheDezacGroupLtd©TheDezacGroupLtd2011anufacturedbyTheDezacGroupLtd,POBox17,Cheltenham,EnglandGL537ET

Overlapbyathird

Overlapbyhalf

treatmentarea

indentationmark

treatmentarea

indentationmark

treatmentarea

indentationmark

1-IN-LAHC5-UK/1.2

instructions

l m

COMPONENTS

a. Mains Adapter

b. Keys

c. DC Power Socket

d. Mute Button

e. Keyswitch

f. Power Level Indicator

g. Power Increase Button (+)

h. Power Decrease Button (-)

i. x60 SCAN button

j. x20 SCAN button

k. SINGLE button

l. Hand-held Wand

m. Laser Button

n. Orange Light

o. White Light

p. Touch Pins

q. Laser Aperture

r. Indentation Guide

s. Front Face

laseraperture

Specyfikacje produktu

Marka:	Rio
Kategoria:	urządzenie do usuwania włosów
Model:	Scanning Laser X60
Kolor produktu:	Biały
Szerokość opakowania:	240 mm
Wysokość opakowania:	290 mm
Głębokość opakowania:	85 mm
Technologia usuwania włosów:	Laser
Końcówka do ciała:	Tak
Regulowana intensywność:	Tak
Liczba poziomów intensywności:	5
Precyzyjna końcówka (do twarzy):	Tak