Instrukcja obsługi Rinnai TRW02IN

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Rinnai TRW02IN (20 stron) w kategorii Ketel & boiler. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/20
1 Rinnai Rack Installation
Tankless Rack System (TRS) InstallaƟon Manual
Additional information can be obtained from the appliance manual.
Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this or any other
appliance.
WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electrical switch; do not use any phone in your building.
Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instrucƟons.
If you cannot reach your gas supplier, call the re department.
InstallaƟon and service must be performed by a licensed professional.
If the informaƟon in these instrucƟons is not followed exactly, a re or explosion
may result causing property damage, personal injury or death.
WARNING
Free Standing Rack
(6 water heaters)
Wall Mounted Rack
(4 water heaters)
2 Rinnai Rack Installation
Description ............................................................ 3
Venting Options ..................................................... 3
TRS Part Nos. and Main Components .................. 4
Specifications ........................................................ 5
Clearances ............................................................ 7
Hoisting ................................................................. 8
Mounting Wall Racks ............................................ 9
Securing Free Standing Racks ............................. 9
Relief Valve Piping .............................................. 10
Piping for Multiple Racks .................................... 10
Parallel Piping Drawing ....................................... 11
End caps / Connections ...................................... 12
Replacement Parts .............................................. 12
Condensate Drain ............................................... 13
Checklist for Plumbing ......................................... 13
Installation of Gas Supply .................................... 14
Connecting Electricity .......................................... 14
MSB Installation................................................... 15
Final Checklist ..................................................... 17
Extended Limited Labor Warranty ....................... 18
Safety Symbols
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in minor or
moderate injury. It may also be used to alert against unsafe practices.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and
others.
DANGER
CAUTION
WARNING
A licensed professional must install the common venng.
The installer should have skills such as
connecng gas lines, water lines, valves, and electricity
knowledge of applicable naonal, state, and local codes
If you lack these skills, contact a licensed professional.
InstallaƟon
Table of Contents
3 Rinnai Rack Installation
DescripƟon
Rinnai Tankless Rack Systems (TRS) include wall mounted and free standing conguraons. The wall mounted
rack systems are available for 2, 3, or 4 water heaters. Free standing rack systems are available for 2, 3, 4, 5, or 6
water heaters.
The TRS can be ordered with Rinnai’s Common Venng System, which consists of the CVent exhaust venng and
PVC intake venng Up to eight tankless units share the same CVent system.
The Rinnai TRS features design details that make installaon straigh orward. Gas and water manifolds are
properly sized, and condensate drainage mechanisms and electronic controls for mulple units are included.
The racks are constructed of powdercoated aluminum, to stand up to the most demanding commercial
environments, while minimizing weight.
The TRS is designed to be used with Rinnai tankless water heaters only. Do not mount nonRinnai water heaters
on the TRS.
VenƟng OpƟons
Venng Opons Exhaust Vent Material
Intake Vent
Material Diameter
Max.
Units Max. Vent Length
Common Venng System PPtl (CVent) PVC 8" 8 100' (with 7 units)
Concentric PPs PVC 5" 1 41'
Dual Pipe* PPs PPs or PVC 3" 1 39'
* This venng is provided by Centrotherm through their own distribuon network
Venng components are packaged together with the preassembled Rack, but not assembled. Assembly of
the vent system is to be done by the contractor in the eld.

Specyfikacje produktu

Marka: Rinnai
Kategoria: Ketel & boiler
Model: TRW02IN

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Rinnai TRW02IN, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Ketel & boiler Rinnai

Rinnai

Rinnai RE199eP Instrukcja

22 Września 2024
Rinnai

Rinnai TRW02IN Instrukcja

22 Września 2024
Rinnai

Rinnai REP160iN Instrukcja

22 Września 2024
Rinnai

Rinnai RSE1S50BP Instrukcja

22 Września 2024
Rinnai

Rinnai RE140eN Instrukcja

21 Września 2024
Rinnai

Rinnai RE180iN Instrukcja

21 Września 2024
Rinnai

Rinnai RUR199iN Instrukcja

21 Września 2024
Rinnai

Rinnai REP199eN Instrukcja

21 Września 2024
Rinnai

Rinnai V94iN Instrukcja

21 Września 2024

Instrukcje Ketel & boiler

Najnowsze instrukcje dla Ketel & boiler

Philips

Philips AWH1216 Instrukcja

29 Września 2024
Philips

Philips AWH1266 Instrukcja

29 Września 2024
Philips

Philips AWH1217 Instrukcja

29 Września 2024
Philips

Philips AWH1265 Instrukcja

29 Września 2024
Philips

Philips AWH1335 Instrukcja

29 Września 2024
Philips

Philips AWH1336 Instrukcja

29 Września 2024
Philips

Philips AWH1230 Instrukcja

29 Września 2024
Philips

Philips AWH1234 Instrukcja

29 Września 2024
Philips

Philips AWH1308 Instrukcja

29 Września 2024
Philips

Philips AWH1053 Instrukcja

29 Września 2024