Instrukcja obsługi Ridgid R3204

Ridgid Maszyna do piłowania R3204

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ridgid R3204 (44 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/44
OPERATOR’S MANUAL
6-1/2 in. CIRCULAR SAW
MANUEL D’UTILISATION
SCIE CIRCULAIRE DE 165 mm (6-1/2 po)
MANUAL DEL OPERADOR
SIERRA CIRCULAR DE 165 mm (6-1/2 pulg.)
R3204
To register your RIDGID
product, please visit:
http://register.RIDGID.com
Pour enregistrer votre
produit de RIDGID,
s’il vous plaît la visite:
http://register.RIDGID.com
Para registrar su producto
de RIDGID, por favor visita:
http://register.RIDGID.com
TABLE OF CONTENTS
****************
General Power Tool Safety
Warnings 2-3 .........................................
Circular Saw Safety Rules 3-4 ...............
Symbols 5 ..............................................
 Electrical .............................................6
Features ..............................................7
Assembly .........................................7-8
Operation .......................................8-12
Adjustments ................................12-13
Maintenance .....................................13
Accessories ......................................14
Illustrations ..................................15-17
Parts Ordering and
Service Back page ................................
TABLE DES MATIÈRES
****************
Règles de sécurité relatives
aux outils electriques 2-3 ......................
Avertissements de sécurité
relatifs scie circulaire 3-4 .......................
Symboles 5 ............................................
 Caractéristiques électriques 6 ...............
Caractéristiques .................................7
Assemblage .....................................7-8
Utilisation .......................................8-12
Réglages 12-13 ......................................
Entretien ...........................................13
Accessoires 14 ......................................
 Illustrations ..................................15-17
Commande de pièces et
dépannage Page arrière ........................
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad
para herramientas eléctricas 2-3 .........
Advertencias de seguridad
sierra circular 3-4 .................................
Símbolos 5 ............................................
 Aspectos eléctricos 6 ...........................
Características ...................................7
Armado .......................................... 7-8
Funcionamiento ........................... 8-12
Ajustes ....................................... 12-13
Mantenimiento .................................13
Accesorios .......................................14
Ilustraciones .............................. 15-17
 Pedidos de piezas y
servicio Pág. posterior .........................
Includes: Circular saw, blade, hex key,
Operator’s Manual
Inclut : Scie circulaire, lam e, clé
hexagonale, manuel d’utilisation
Incluye: Sierra circular, hoja, llave
hexagonal, manual del operador
SAVE THIS MANUAL
FOR FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
WARNING:
To reduce the risk of injury, the
user must read and understand
the operator’s manual before
using this product.
AVERTISSEMENT :
Pour réduire les risques de
blessures, l’utilisateur doit lire
et veiller à bien comprendre
le manuel d’utilisation avant
d’utiliser ce produit.
ADVERTENCIA:
Para reducir el riesgo de
lesiones, el usuario debe leer
y comprender el manual del
operador antes de usar este
producto.
2 - English
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal
injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
3 - English
CUTTING PROCEDURES
DANGER:
Keep hands away from cutting area and the
blade. Keep your second hand on auxiliary
handle, or motor housing. If both hands are
holding the saw, they cannot be cut by the blade.
Do not reach underneath the workpiece. The guard
can not protect you from the blade below the workpiece.
Adjust the cutting depth to the thickness of the
workpiece. Less than a full tooth of the blade teeth
should be visible below the workpiece.
Never hold piece being cut in your hands or across
your leg. Secure the workpiece to a stable platform.
It is important to support the work properly to minimize
body exposure, blade binding, or loss of control.
Hold the power tool by insulated gripping surfaces only,
when performing an operation where the cutting tool
may contact hidden wiring or its own cord.
Contact with
a “live” wire will also make exposed metal parts of the
power tool “live” and could give the operator an electric
shock.
When ripping, always use a rip fence or straight edge
guide. This improves the accuracy of cut and reduces
the chance of blade binding.
Always use blades with correct size and shape
(diamond versus round) of arbour holes. Blades that
do not match the mounting hardware of the saw will run
eccentrically, causing loss of control.
Never use damaged or incorrect blade washers or
bolt. The blade washers and bolt were specially designed
for your saw, for optimum performance and safety of
operation.
KICKBACK CAUSES AND RELATED WARNINGS
Kickback is a sudden reaction to a pinched, bound or
misaligned saw blade, causing an uncontrolled saw to
lift up and out of the workpiece toward the operator;
When the blade is pinched or bound tightly by the kerf
closing down, the blade stalls and the motor reaction
drives the unit rapidly back toward the operator;
If the blade becomes twisted or misaligned in the cut,
the teeth at the back edge of the blade can dig into the
top surface of the wood causing the blade to climb out
of the kerf and jump back toward the operator.
Kickback is the result of saw misuse and/or incorrect
operating procedures or conditions and can be avoided by
taking proper precautions as given below:
Maintain a firm grip with both hands on the saw and
position your arms to resist kickback forces. Position
your body to either side of the blade, but not in line
with the blade. Kickback could cause the saw to jump
backwards, but kickback forces can be controlled by the
operator, if proper precautions are taken.
When blade is binding, or when interrupting a cut
for any reason, release the trigger and hold the saw
motionless in the material until the blade comes to a
complete stop. Never attempt to remove the saw from
the work or pull the saw backward while the blade is
in motion or kickback may occur. Investigate and take
corrective actions to eliminate the cause of blade binding.
When restarting a saw in the workpiece, centre the
saw blade in the kerf and check that saw teeth are
not engaged into the material. If saw blade is binding,
it may walk up or kickback from the workpiece as the
saw is restarted.
Support large panels to minimise the risk of blade
pinching and kickback. Large panels tend to sag under
their own weight. Supports must be placed under the
panel on both sides, near the line of cut and near the
edge of the panel.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
GENERAL POWER TOOL SAFETY WARNINGS
CIRCULAR SAW SAFETY WARNINGS
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
When servicing a power tool, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual. Use of unauthorized
parts or failure to follow Maintenance instructions may
create a risk of shock or injury.

Specyfikacje produktu

Marka: Ridgid
Kategoria: Maszyna do piłowania
Model: R3204

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ridgid R3204, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do piłowania Ridgid

Ridgid

Ridgid R4142 Instrukcja

2 Października 2024
Ridgid

Ridgid R41422 Instrukcja

28 Września 2024
Ridgid

Ridgid PCS-500 Instrukcja

22 Września 2024
Ridgid

Ridgid PC-612 Instrukcja

20 Września 2024
Ridgid

Ridgid PC-106 Instrukcja

19 Września 2024
Ridgid

Ridgid R30022 Instrukcja

16 Września 2024
Ridgid

Ridgid R4040S Instrukcja

13 Września 2024
Ridgid

Ridgid R3205 Instrukcja

13 Września 2024
Ridgid

Ridgid R31011 Instrukcja

12 Września 2024
Ridgid

Ridgid R3031 Instrukcja

10 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Bavaria

Bavaria BEC 2040 TC Instrukcja

6 Grudnia 2024
Bavaria

Bavaria BCS 64/1 Instrukcja

6 Grudnia 2024
Bavaria

Bavaria BJS 400 Instrukcja

6 Grudnia 2024
Einhell

Einhell TE-TC 18/115 Li Instrukcja

4 Grudnia 2024
Einhell

Einhell WIS 600/400 Instrukcja

4 Grudnia 2024
Einhell

Einhell WIS 700/400 Instrukcja

4 Grudnia 2024
Einhell

Einhell WIS 400/230 Instrukcja

4 Grudnia 2024
Einhell

Einhell MKS 1940 Instrukcja

4 Grudnia 2024
Einhell

Einhell TKS 1500 ECO Instrukcja

4 Grudnia 2024
Einhell

Einhell TKS 1500 ECO Plus Instrukcja

4 Grudnia 2024