Instrukcja obsługi RGBlink MSP 217
RGBlink
konwerter audio / video
MSP 217
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RGBlink MSP 217 (2 stron) w kategorii konwerter audio / video. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
MSP 217 –Quick Start
MSP 217-TX SDI to Fiber Right Panel
Signal Indicator
Power Interface
Connection
MSP 217-RX Fiber to SDI Left Panel
1 4
Remote communication device control interface, used
to connect to the computer or console.
Power Interface
USB Interface
Interface
The device uses the standard 12V/1.5A power supply.
Signal Indicator
SDI Input Interface
SDI input interface Can receive video signal from ，
HD player, and HD camera, connect interface 16 via
75 ohms impedance BNC port. Connect LED screens
via network cable.
Fiber Output Interface
1
1
VIEW SIZE THE WORLD
NOTE For full installation, configuration, and operation details, please refer to
the MSP 217 user manual, which is available at www.rgblink.com.
This guide provides quick start instructions for an experienced installer
to set up and operate the MSP 217.
Address: S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone, Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: sales@rgblink.com http://www.rgblink.cn
MSP 217 Quick Start
Rev 1.0
Page 1 of 2
53
62
SDI Input Interface USB Interface
Power indicator 2 lights when device has power
supply.
LED indicator 4 is on when connect SDI cable and
the device is in normal Operation.
LED indicator 6 is on when connect USB cable and
the device is in normal Operation.
MSP 217-TX SDI to Fiber Left Panel
Connection
1 2Signal Indicator Fiber Output Interface
Signal Indicator
LED indicator 1 is on when connect fiber cable and
the device is in normal operation.
Used to connect fiber cable, the device uses single
mode one-core, LC interface.
Connection
2Signal Indicator Fiber Input Interface
Signal Indicator
LED indicator 1 is on when connect fiber cable and
the device is in normal operation.
Fiber Input Interface
Used to connect fiber cable, the device uses single
mode one-core, LC interface.
MSP 217-RX Fiber to SDI Right Panel
Connection
53
642Power Interface Signal Indicator
SDI Output Interface USB Interface
Power Interface
The device uses the standard 12V/1.5A power supply.
SDI Output Interface
USB Interface
Function Block Diagram
Operating Principle
MSP 217 SDI to Fiber
Address: S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone, Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: sales@rgblink.com http://www.rgblink.cn
MSP 217 Quick Start
Rev 1.0
Page 2 of 2
Common Questions and Solution
Signal Indicator
Power indicator 2 lights when device has power supply.
LED indicator 4 is on when connect SDI cable and the
device is in normal Operation.
LED indicator 6 is on when connect USB cable and
the device is in normal Operation.
SDI output interface Can receive video signal from ，
HD player, and HD camera, connect interface 16 via
75 ohms impedance BNC port. Connect LED
screens via network cable.
Remote communication device control interface,
used to connect to the computer or console.
Operation Manual
MSP 217 SDI to Fiber transmitter is connected to
media player or HD/SD SDI camera, etc. MSP 217
SDI to Fiber transmitter to power supply. In order to
avoid the damage of device, please use the standard
power adapter. Fiber interface is used to connect to
MSP 217 Fiber to SDI receiver.
MSP 217 Fiber to SDI
Function Block Diagram
Operating Principle
on MSP 217 SDI to Fiber transmitter with fiber cable,
and then connect the SDI interface on MSP 217 Fiber
to SDI panel to display device.In order to avoid
damaging the device, please use the standard power
adapter.
MSP 217 Fiber to SDI receiver is connected to
television (monitor) or other device which has SDI
interface
Connect the fiber interface to the other interface
Power indicator light is off or blinks
1. Check whether plug in the power cord, and has
power supply;
2. Check whether the power cable is connected, and
in good connection;
3. If above without problem, then the power indicator
is damaged.
Signal indicator light is off or blinks
1. Check whether connect the signal;
2. Check whether the input signal, input wire and output
wire are normal, the interfaces are in good connection;
3. If above without problem, then the signal indicator is
damaged.
Note: The indicator beside fiber interface is on when the
device is in normal operation. It will off or blink if the
fiber cable is in poor connection.
12V power interface poor contact
1. Check whether the power interface is in good
connection, if the interface is not tighten, screw it again.
2. Check whether any problem with adapter head,
replace it if there is any problem.
3. Check the power connector is loose, if so, please send
to processional personnel for repair.
Specyfikacje produktu
| Marka: | RGBlink |
| Kategoria: | konwerter audio / video |
| Model: | MSP 217 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z RGBlink MSP 217, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje konwerter audio / video RGBlink
19 Czerwca 2024
19 Czerwca 2024
19 Czerwca 2024
19 Czerwca 2024
19 Czerwca 2024
19 Czerwca 2024
19 Czerwca 2024
19 Czerwca 2024
19 Czerwca 2024
19 Czerwca 2024
Instrukcje konwerter audio / video
- konwerter audio / video TP-Link
- konwerter audio / video StarTech.com
- konwerter audio / video Behringer
- konwerter audio / video TRENDnet
- konwerter audio / video D-Link
- konwerter audio / video Tripp Lite
- konwerter audio / video Digitus
- konwerter audio / video Sabrent
- konwerter audio / video Audiotec Fischer
- konwerter audio / video Pro-Ject
- konwerter audio / video DataVideo
- konwerter audio / video Intellinet
- konwerter audio / video Blustream
- konwerter audio / video Marmitek
- konwerter audio / video Smart-AVI
- konwerter audio / video Arcam
- konwerter audio / video AJA
- konwerter audio / video Atlona
- konwerter audio / video Gefen
- konwerter audio / video Kathrein
- konwerter audio / video Karma
- konwerter audio / video ShieldRock
- konwerter audio / video Alfatron
- konwerter audio / video Digitalinx
- konwerter audio / video Speaka
- konwerter audio / video SWIT
- konwerter audio / video Sescom
- konwerter audio / video Kramer
- konwerter audio / video KanexPro
- konwerter audio / video BZBGear
- konwerter audio / video Key Digital
- konwerter audio / video Whirlwind
- konwerter audio / video Apantac
- konwerter audio / video AMX
- konwerter audio / video Twelve South
- konwerter audio / video C2G
- konwerter audio / video WyreStorm
- konwerter audio / video Sonifex
- konwerter audio / video Intelix
- konwerter audio / video Ocean Matrix
- konwerter audio / video AVPro Edge
- konwerter audio / video Evolution
- konwerter audio / video A-NeuVideo
Najnowsze instrukcje dla konwerter audio / video
28 Września 2024
24 Września 2024
24 Września 2024
16 Września 2024
16 Września 2024
16 Września 2024
16 Września 2024
16 Września 2024
16 Września 2024
16 Września 2024