Instrukcja obsługi Revel Performa3 B110
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Revel Performa3 B110 (11 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/11
B112/B110 Subwoofer
Quick Start Guide
2B112/B110 Subwoofer
Quick Start Guide
ABOUT THIS DOCUMENT
This quick-start guide contains all the information you will need to
unpack and initially place your Revel Performa3 subwoofer, connect it to
the rest of your audio system, turn it on and have a first listen. To take
full advantage of all the performance your new subwoofer is capable of
delivering, please go to the Revel Web site (www.revelspeakers.com)
and download the free and the Revel Performa3 Subwoofer User Guide
Revel LFO (Low-Frequency Optimization) software. The User Guide and
software provide you with an extremely sophisticated way to optimize
your subwoofer’s performance for your particular installation.
ABOUT REVEL PERFORMA3 SUBWOOFERS
Thank you for purchasing a Revel Performa3 subwoofer. The B112
and B110 are powered by a 1,000-watt RMS (2,000-watt peak)
internal amplifier and feature a custom-designed transducer that
combines a new level of low frequency nuance and refinement with
unprecedented brute-force capabilities in a unit designed for use in the
home. Combined with the internal amplifier’s large power capability,
and the extensive programming and room equalization capability of
the companion Revel LFO (Low-Frequency Optimization) programming
software, the result is a new standard of superb bass performance and
adaptability for home entertainment systems.
The B112 and B110 feature 12-inch and 10-inch versions, respectively, of
a brand-new low-frequency transducer that has been designed specifically
for use in these two subwoofer models. The primary design goal for this
new driver was to produce very low frequencies at extremely high SPL
(sound-pressure levels) while at the same time maintaining extremely low
distortion – requirements that usually remain mutually exclusive. This new
unit maintains a precise engineering balance between the voice coil, spider
and surround that produces linear motion of all three for lower distortion by
incorporating CAD/FEA optimized high-linearity motor geometry:
s The extremely long (50mm) two-layer copper voice coil gives this
transducer a very high Xmax, dramatically increasing output.
A fiberglass voice coil former helps the voice coil withstand
high temperatures, reducing power compression and helping
increase output. A spacer added at the top of the voice coil former
maintains motor geometry, creates a solid attachment joint and
prevents deformation of the voice coil at high outputs. The spacer
also eliminates the typical single fulcrum point between the spider
and cone on the voice coil former, minimizing voice coil rocking
modes during hi-power operation.
s A high-temperature Nomex® spider features a progressive roll
design that evenly distributes mechanical stress, helping keep the
cone’s motion linear during high-excursion operation.
s A nitril/butylene rubber surround uses patented Plus One®
technology that increases the transducer’s radiating area (Sd),
increasing volume displacement and output.
The coated cellulose/pulp cone and dustcap assembly is vented under
the dustcap to aid in the exchange of air, which reduces acoustic losses
and increases output.
The transducer’s massive magnet assembly (30.6 lb in the B112; 24.3
lb in the B110) features a triple-stacked vented ceramic 5 magnet with
flared vents that reduce turbulence, which improves airflow, increases
output and reduces distortion. Dual symmetrical magnet shorting rings
and an extended top pole create a symmetrical magnetic gap field that
increases power handling and reduces power compression further
increasing output. A 15mm-thick top plate improves heat and flux
distribution for lower distortion.
The cast aluminum frame is fully vented to minimize acoustic losses
caused by excessive back pressure. This frame also maintains
dimensional stability and precise mechanical tolerances, allowing the
transducer to be manufactured and assembled to a high degree of
precision.
The B112 and B110 enclosures are formed with contiguous wood layers
that prevent splitting. They feature strategically-oriented bracing that
eliminates the possibility of enclosure-induced coloration. The beautiful,
modern enclosure is finished in high-gloss piano black or genuine
American walnut in a process (developed and overseen by Italian luxury
cabinet makers) that exceeds automotive finish quality.
Your Revel Performa3 subwoofer is designed to be used along with our
Revel LFO programming software, which is available as a free download
at www.revelspeakers.com. The software configures the DSP processor
inside your Performa3 subwoofer, which provides up to ten independent
equalization points, each with user-determined frequency, amount of
gain/cut and filter Q (bandwidth). This provides you with an extremely
sophisticated way to optimize the subwoofer’s performance for your
particular installation, listening room and seating arrangement. In
addition, the software also provides programming for the subwoofer’s
internal crossover system, as well as speaker delay and polarity
settings. All of these processing options can also be independently
applied to the subwoofer’s left and right high-pass outputs.
During development, every Revel loudspeaker model is compared to
competitive models in our unique position-independent double-blind
listening lab. This process utilizes the latest psychoacoustic research
to assure that these listening tests are valid, enabling us to verify that
all Revel loudspeakers are superior to their competitors before they are
allowed to go into production.
TABLE OF CONTENTS
About Revel Performa3 Subwoofers........................................................................................................................................ 2
B112/B110 Overview ............................................................................................................................................................... 3
Subwoofer Placement Considerations..................................................................................................................................... 4
Placing Four Subwoofers, Placing Two Subwoofers, Placing a Single Subwoofer
Making Connections ................................................................................................................................................................ 6
Connecting to a Surround Processor with an Internal Crossover, Connecting to a Stereo Preamplifier,
Connecting Multiple Subwoofers, Trigger and Power Connections
Caring for Your Subwoofer..................................................................................................................................................... 10
Specifications ......................................................................................................................................................................... 10
Warranty ................................................................................................................................................................................ 11
3
B112/B110 Subwoofer
Quick Start Guide
B112/B110 OVERVIEW
(Note: B112 and B110 rear panels are identical.)
Subwoofer Out connectors: If you are using more than one Performa3
subwoofer in the system, connect the Subwoofer Out connector to
the additional Performa3 subwoofer’s Input Connector. Balanced (XLR)
and unbalanced (RCA) connectors are available. Both outputs are 0dBv
(nominal)/+20dBv (maximum). The XLR output is pin 2 high.
High-Pass Out connectors: Use these connectors to send a high-pass
filtered signal to the main (left/right) amplifier’s inputs. Balanced (XLR)
and unbalanced (RCA) connectors are available. Both outputs are 0dBv
(nominal)/+20dBv (maximum). The XLR output is pin 2 high. NOTE: The
factory-default high-pass crossover setting is at 80Hz with a 24dB/octave
(4th-order) slope. You can change these settings using the Revel LFO
programming software. See the Revel Performa3 Subwoofer User Guide
for more information.
Input connectors: Connect these to the outputs of a stereo preamp or
connect a surround processor's subwoofer output to either the left or right
input. Balanced (XLR) and unbalanced (RCA) connectors are available. Both
inputs are 0dBv (nominal)/+20dBv (maximum). The XLR input is pin 2 high.
12V Trigger In/Out connectors: When the subwoofer’s Power Mode
Switch is set to “Trigger,” the subwoofer will automatically turn on when
5V – 12V is present at the 12V Trigger In connection and will turn off when
the voltage at this connection is removed. Whenever the subwoofer is on,
a 12V trigger signal is available at its 12V Trigger Out connector for use
with additional Performa3 subwoofers, or another triggerable device.
USB connector: To program the subwoofer’s room equalization and
high-pass and low-pass crossover characteristics, connect this USB Type
B receptacle to the USB receptacle of a computer that is running the Revel
LFO programming software.
Subwoofer Gain control: Use this control to adjust the volume of the
subwoofer relative to the system’s other speakers. (The Gain control can
be disabled using the Revel LFO programming software.)
Power Mode switch: This switch determines how the subwoofer will
turn on and off:
s When this switch is set in the “Auto” position and the Power switch
is set to “On,” the subwoofer will automatically turn on when it first
detects an audio signal at any of its inputs, and will automatically
enter the standby mode after it has received no audio signal for a
period of time (30 seconds to 120 minutes) you can set using the
Revel LFO programming software.
s When this switch is set in the “On” position, the subwoofer will turn
on when the Power switch is set to “On” and will remain on until the
Power switch is set to “Off.”
s When this switch is set in the “Trigger” position and the Power
switch is set to “On,” the subwoofer will automatically turn on when
a voltage is present at the 12V Trigger In connection and will remain
on as long as the voltage is present. When the voltage at the 12V
Trigger In connection is removed the subwoofer will automatically
turn off.
Power switch: When this switch is set to “On,” the subwoofer’s on/off
status is dependent on the setting of the Power Mode switch (see above).
When the Power switch is set to “Off” the subwoofer is turned off and
cannot turn on automatically.
We suggest setting the Power switch in the “Off” position if you will not
be using the subwoofer for a long period of time, such as when you’re on
vacation.
Power Cord connector: Plug the supplied power cord into this
connector and into a working AC power outlet.unswitched
Power Switch
Power Cord Connector USB Connector
12V Trigger In/Out Connectors
Subwoofer Out Connector (Balanced)
Subwoofer Out Connector (Unbalanced)
High-Pass Out Connectors (Balanced)
High-Pass Out Connectors (Unbalanced)
Input Connectors (Unbalanced)
Input Connectors (Balanced)
Subwoofer Gain Control
Power Mode Switch
Specyfikacje produktu
| Marka: | Revel |
| Kategoria: | subwoofer |
| Model: | Performa3 B110 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Revel Performa3 B110, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje subwoofer Revel
30 Września 2024
30 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
Instrukcje subwoofer
- subwoofer Yamaha
- subwoofer Pioneer
- subwoofer Bosch
- subwoofer JBL
- subwoofer Onkyo
- subwoofer Roland
- subwoofer Origin Acoustics
- subwoofer KEF
- subwoofer Bose
- subwoofer Klipsch
- subwoofer Crestron
- subwoofer Behringer
- subwoofer Boss
- subwoofer Marquant
- subwoofer Jensen
- subwoofer Blaupunkt
- subwoofer Speed-Link
- subwoofer Metra
- subwoofer Martin Logan
- subwoofer DAP-Audio
- subwoofer Denon
- subwoofer Phoenix Gold
- subwoofer Audac
- subwoofer Cambridge
- subwoofer Kenwood
- subwoofer Polk
- subwoofer Alpine
- subwoofer Dynaudio
- subwoofer Paradigm
- subwoofer JVC
- subwoofer Memphis Audio
- subwoofer Jamo
- subwoofer Auna
- subwoofer Nubert
- subwoofer LD Systems
- subwoofer Krüger&Matz
- subwoofer Audioengine
- subwoofer Audiotec Fischer
- subwoofer Clarion
- subwoofer Pro-Ject
- subwoofer Fusion
- subwoofer Neumann
- subwoofer Wharfedale
- subwoofer Magnat
- subwoofer Pyle
- subwoofer ELAC
- subwoofer Sonus Faber
- subwoofer Marantz
- subwoofer Bowers & Wilkins
- subwoofer Monitor Audio
- subwoofer Vonyx
- subwoofer Alto
- subwoofer Peavey
- subwoofer RCF
- subwoofer Harman Kardon
- subwoofer JL Audio
- subwoofer REL Acoustics
- subwoofer Teufel
- subwoofer Dali
- subwoofer Proel
- subwoofer Hifonics
- subwoofer Focal
- subwoofer Kicker
- subwoofer Omnitronic
- subwoofer Mackie
- subwoofer Deaf Bonce
- subwoofer Insignia
- subwoofer Piega
- subwoofer SVS
- subwoofer Arcam
- subwoofer Mac Audio
- subwoofer Infinity
- subwoofer McIntosh
- subwoofer Dynacord
- subwoofer Orion
- subwoofer Hertz
- subwoofer Kali Audio
- subwoofer KRK
- subwoofer Atlas Sound
- subwoofer Gemini
- subwoofer Martin
- subwoofer PMC
- subwoofer Definitive Technology
- subwoofer Ground Zero
- subwoofer Stinger
- subwoofer PowerBass
- subwoofer Power Dynamics
- subwoofer Kanto
- subwoofer Rockford Fosgate
- subwoofer Canton
- subwoofer Monacor
- subwoofer Tannoy
- subwoofer Electro-Voice
- subwoofer AudioControl
- subwoofer SPL
- subwoofer Crunch
- subwoofer Match
- subwoofer Indiana Line
- subwoofer HK Audio
- subwoofer Fenton
- subwoofer Sonance
- subwoofer Cabasse
- subwoofer Audison
- subwoofer Sonos
- subwoofer Musway
- subwoofer Renegade
- subwoofer Heco
- subwoofer MB Quart
- subwoofer Massive
- subwoofer Atlantic
- subwoofer QTX
- subwoofer QSC
- subwoofer Lanzar
- subwoofer Genelec
- subwoofer Apart
- subwoofer Bazooka
- subwoofer Skytec
- subwoofer Monoprice
- subwoofer Eve Audio
- subwoofer Yorkville
- subwoofer Axton
- subwoofer Nxg
- subwoofer FBT
- subwoofer OSD Audio
- subwoofer Andover
- subwoofer Soundstream
- subwoofer PSB
- subwoofer Citronic
- subwoofer James
- subwoofer PSSO
- subwoofer Quadral
- subwoofer Wet Sounds
- subwoofer Extron
- subwoofer BW
- subwoofer Helix
- subwoofer Mission
- subwoofer Martin Audio
- subwoofer Morel
- subwoofer Avid
- subwoofer Ecler
- subwoofer Mtx Audio
- subwoofer Aquatic AV
- subwoofer DB Technologies
- subwoofer GoldenEar Technology
- subwoofer Roswell
- subwoofer Velodyne
- subwoofer Chrysalis
- subwoofer Raveland
- subwoofer ANT
- subwoofer IMG Stage Line
- subwoofer Eikon
- subwoofer ESX
- subwoofer Wavemaster
- subwoofer Fluance
- subwoofer RetroSound
- subwoofer Pyramid
- subwoofer On-Q
- subwoofer Sound Ordnance
- subwoofer MadBoy
- subwoofer Planet Audio
- subwoofer Black Hydra
- subwoofer Totem
- subwoofer Energy
- subwoofer Mirage
- subwoofer Poly-Planar
- subwoofer SSV Works
- subwoofer PrecisionPower
- subwoofer Theater Solutions
- subwoofer Mordaunt Short
- subwoofer Triangle
- subwoofer Audiofrog
- subwoofer KLH Audio
- subwoofer Proficient
- subwoofer Alphasonik
- subwoofer Cerwin-Vega
- subwoofer BMB
- subwoofer Glemm
Najnowsze instrukcje dla subwoofer
13 Października 2024
13 Października 2024
10 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024